RCCrawler Forums
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Vaterra Ascender (http://www.rccrawler.com/forum/vaterra-ascender/)
-   -   My ascender (http://www.rccrawler.com/forum/vaterra-ascender/569972-my-ascender.html)

Bjørn raymond 08-24-2016 03:42 PM
My ascender
 
8 Attachment(s)
Attachment 347547

Attachment 347548

Attachment 347549

Attachment 347550

Attachment 347551

Attachment 347552

Attachment 347553

Attachment 347554

Natedog 08-24-2016 03:58 PM
Re: My ascender
 
Looks good, I see SSD titanium links, machined aluminum diff covers, Vaterra aluminum knuckles, lockouts and brass brake rotors! What ESC etc? :)

Hobbezco 08-24-2016 05:27 PM
Re: My ascender
 
I dig the mudflaps. Nice work.

Jeepiac 08-24-2016 05:46 PM
Re: My ascender
 
"thumbsup" Really like what you've done here. Ditto on the mud flaps! Way cool "thumbsup"

Bjørn raymond 08-25-2016 01:20 PM
Re: My ascender
 
Quote:
Originally Posted by Natedog (Post 5554235)
Looks good, I see SSD titanium links, machined aluminum diff covers, Vaterra aluminum knuckles, lockouts and brass brake rotors! What ESC etc? :)

thank you :) waiting for vaterra aluminum c hubs.har also mounted Warn winch and swaybar like you. drilled out holes in shock. esc :castle sidewinder 3 and 45 turn motor . trying out new foam and some weights in the wheels. sorry but is not so good in English. :)

Natedog 08-25-2016 01:36 PM
Re: My ascender
 
You're welcome and you're English is understandable for me. Looking forward to more updates. :)

Bjørn raymond 08-25-2016 04:20 PM
Re: My ascender
 
8 Attachment(s)
some pictures with my friend catofj84 with his bronco :)

Bjørn raymond 08-27-2016 06:20 AM
Re: My ascender
 
Has one set vaterra aluminum front lower links , VTR334023 they touch the frame when the shocks is almost at the bottom. is this normal ? anyone with the same problem ? :)

Bjørn raymond 08-27-2016 05:04 PM
Re: My ascender
 
6 Attachment(s)
tried the lights tonight , need to put on some lights under the car too "thumbsup":)

Bjørn raymond 08-28-2016 12:40 PM
Re: My ascender
 
7 Attachment(s)
Great day for crawling :)

Bjørn raymond 08-31-2016 10:44 AM
Re: My ascender
 
1 Attachment(s)
Got the new tires and the C - hubs today "thumbsup" looking forward to try the new tires :)

Bjørn raymond 09-02-2016 02:55 PM
Re: My ascender
 
1 Attachment(s)
Mounting the new tires :) looks good I think "thumbsup" Good weekend everyone 8)"thumbsup"

Bjørn raymond 09-07-2016 12:44 PM
Re: My ascender
 
1 Attachment(s)
New c-hubs and machined vaterra links mounted "thumbsup" 8)

Natedog 09-10-2016 07:49 PM
Re: My ascender
 
Quote:
Originally Posted by Bjørn raymond (Post 5555452)
Has one set vaterra aluminum front lower links , VTR334023 they touch the frame when the shocks is almost at the bottom. is this normal ? anyone with the same problem ? :)
On my Blazer Ascenders (WB4) the front lower HD links barely contact the frame rails once in awhile. I set them up so the tops of the lower HD links are canted inwards slightly and that helps, the slight occasional rub is just enough to wear the anodizing off and make a little wear mark in the alumium, has not caused any problems though.

Quote:
Originally Posted by Bjørn raymond (Post 5555675)
tried the lights tonight , need to put on some lights under the car too "thumbsup":)
Lights look great, rock lights (under lights) help a lot at night!

Quote:
Originally Posted by Bjørn raymond (Post 5555918)
Great day for crawling :)
Love the last picture perched up on the cliff! "thumbsup"

Quote:
Originally Posted by Bjørn raymond (Post 5558190)
Mounting the new tires :) looks good I think "thumbsup" Good weekend everyone 8)"thumbsup"
8) Thanks, you too. :)

Quote:
Originally Posted by Bjørn raymond (Post 5560032)
New c-hubs and machined vaterra links mounted "thumbsup" 8)
Looking good again, I like the SSD diff covers and blue brake rotors.

Bjørn raymond 09-11-2016 10:20 AM
Re: My ascender
 
Quote:
Originally Posted by Natedog (Post 5561430)
On my Blazer Ascenders (WB4) the front lower HD links barely contact the frame rails once in awhile. I set them up so the tops of the lower HD links are canted inwards slightly and that helps, the slight occasional rub is just enough to wear the anodizing off and make a little wear mark in the alumium, has not caused any problems though.



Lights look great, rock lights (under lights) help a lot at night!



Love the last picture perched up on the cliff! "thumbsup"



8) Thanks, you too. :)



Looking good again, I like the SSD diff covers and blue brake rotors.

Thanks nate! :)
Did what you said about the front lower HD links , works great now "thumbsup" :) Thanks again :)
Next on the list is rock light , and then there will be som driving at night "thumbsup"
Thank you for like my picture.:) I think the picture was very good myself "thumbsup":)
I like the ssd diff cover and the brake rotors too:) I like all the new upgrades on my car "thumbsup" Thanks for the nice feedback. :):):)

Bjørn raymond 09-11-2016 10:45 AM
Re: My ascender
 
4 Attachment(s)
Mounted the new vaterra aluminum shocks today "thumbsup" :)
The vaterra HD links looks very good "thumbsup":) Should also try out the new foam :)

Bjørn raymond 09-12-2016 10:20 AM
Re: My ascender
 
2 Attachment(s)
Mounted SSD side sliders today, looks good "thumbsup" 8) Did some modification on the steering too :) Now I'm looking forward to test the car after all the new upgrades "thumbsup" :) :)

fomoco 09-12-2016 02:39 PM
Re: My ascender
 
that's the same steering setup I done, but had to remove the spacer in between draglink an tierod, seemed to be smoother thru the left an right radius, an also to be the same angle as the track bar, but there is no more flex in the tierod, like the stock steering linkage had.

Natedog 09-12-2016 02:45 PM
Re: My ascender
 
Nice, that's on my list of mods to do too. :)

Bjørn raymond 09-13-2016 12:32 PM
Re: My ascender
 
Quote:
Originally Posted by fomoco (Post 5562097)
that's the same steering setup I done, but had to remove the spacer in between draglink an tierod, seemed to be smoother thru the left an right radius, an also to be the same angle as the track bar, but there is no more flex in the tierod, like the stock steering linkage had.
Hi! Do you have any picture of your setup ?:)


All times are GMT -6. The time now is 02:00 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com