New SSD HD Titanium Link Sets For WB2 http://www.ssd-rc.com/images/ascende...nks%20main.jpg http://www.ssd-rc.com/images/ascende...0links%203.jpg Complete titanium suspension link set Includes panhard bar Internal thread Direct fit onto Vaterra Ascender using stock Vaterra rod ends Suitable for Ascender WB2 290mm wheelbase (Chevrolet K10) 5 X 78mm Titanium links 2 X 66mm Titanium links 1 X 61mm Titanium link 16 X M3 x 12mm threaded rod HD Titanium Link Set for Ascender WB2 For WB4 Complete titanium suspension link set Includes panhard bar Internal thread Direct fit onto Vaterra Ascender using stock Vaterra rod ends Suitable for Ascender WB4 314mm wheelbase (Blazer) 4 X 90mm Titanium links 3 X 78mm Titanium links 1 X 73mm Titanium link 16 X M3 x 12mm threaded rod *HD Titanium Link Set for Ascender WB4 |
Re: New SSD HD Titanium Link Sets Very nice! :) |
Re: New SSD HD Titanium Link Sets Thank you SSD. We appreciate you continuing to support and expand your Ascender line when so many other companies wont. "thumbsup" |
Re: New SSD HD Titanium Link Sets I guess i need to buy my panhards next LIFE IS GOOD |
Re: New SSD HD Titanium Link Sets " Dear Santa ... Ive been a good boy this year ... my ascender(s) need ..." |
Re: New SSD HD Titanium Link Sets Any plans for wb3? Sent from my SM-T320 using Tapatalk |
Re: New SSD HD Titanium Link Sets Just got suspension and steering sets in the mail... These should be alot smoother over the rough stuff |
Re: New SSD HD Titanium Link Sets Quote:
|
Re: New SSD HD Titanium Link Sets Quote:
Quote:
|
Re: New SSD HD Titanium Link Sets Quote:
Sent from my SM-T320 using Tapatalk |
Re: New SSD HD Titanium Link Sets Ok I checked and SS link tapered like SCX kit: HD Stainless Steel Lower Link Set for SCX10 II HD Steel/Titanium Suspension Link Set for SCX10 II WB3 is provided for in Ascender kit, but currently only bodies for this wb3 is other brand such as Proline. |
Re: New SSD HD Titanium Link Sets So what WB does the RTR Bronco have please? |
Re: New SSD HD Titanium Link Sets The Bronco RTR is WB1. |
Re: New SSD HD Titanium Link Sets The threaded rods that connect the ball ends that I got in my steering and suspenson link kits seem a few mm too short. If I bottom them out in the rod ends, there is about 3mm to 3.5 mm left to thread into the links. Is this enough??? If I do this, when I threadlock the threaded rod into the ti link, the hex would be on the inside and ill never get them out.This question is aimed at SSD The ones I received are 12mm. 14mm would work, but16mm would be perfect. Does anyone make these in slightly longer lengths? I would like to bottom them out in the ti links with thread lock leaving the hex on the ball end side. |
Re: New SSD HD Titanium Link Sets Assuming they are the same thread pitch, axial has some M3x16. AXA186. That might be what you are looking for. |
Re: New SSD HD Titanium Link Sets Thanks so much for that part number...8) |
Re: New SSD HD Titanium Link Sets Ok... So im very happy all the titanium links in the ssd sets. But the hardware is too short. I'm keeping the steering and panhard bar, and upper links, but will dump the lower links at cost. Ill pay shipping. What should I price these at? 20$? I really like the Vattera 1 piece links for the bottom |
Re: New SSD HD Titanium Link Sets Is there a formula for link lengths for extended WB Ascender chassis? I'm looking at getting a custom chassis for a longer rig. |
Re: New SSD HD Titanium Link Sets Not any formula, ya just gotta decide on the wheelbase, build/buy links accordingly and keep in mind the F/R links length. Generally rear links little longer than rear. :) |
All times are GMT -6. The time now is 09:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com