I kinda got another Ascender

[snapon boy]

I ll have to convince the wife or sell a few rigs.

149 r/c worx /scalerfab Team Driver

[Hobbezco]

Originally Posted by CODYBOY

Hey Fish, that's telling me its time for a ascender!!! What do you think Jon?
Ernie

Originally Posted by Jeepiac

Amen on that!

Come to the dark side!

[CODYBOY]

Originally Posted by snapon boy

I ll have to convince the wife or sell a few rigs.

149 r/c worx /scalerfab Team Driver

I could give you a little help with axles.
Ernie

[CODYBOY]

Originally Posted by snapon boy

I ll have to convince the wife or sell a few rigs.

149 r/c worx /scalerfab Team Driver

Originally Posted by Jeepiac

Finally found the time to put Ernie's axle under Stumpy today and I cant wait to try it out! Just ran around the house a little, and was amazed at the tight turning radius! This short wheelbase coupled with the Codyboy axle is going to be a great sleeper rig Sorry for the kitchen counter pic's, but that's all yall are gittin fer now

Thanks again, Ernie You da man

Hey Jon, I have quoted a couple guys on prices for axles and the Codyboy Steering and I don't hear back from them? I don't think that they realize the time and money I put into R&D and building these. I'm not a big shop with a lot of overhead or have a bunch of machines to call on for building. It takes me a good day to build a axle like the one I sent you. I use quality parts and I think what I build is quality products. I'm just a old fart tinkering to support my hobby. I know you step out of the box in some of the things you try. Do some of you guys think my prices are out of line? Help
Ernie

[snapon boy]

No they reflect the quality of the end product.

149 r/c worx /scalerfab Team Driver

[JatoTheRipper]

Originally Posted by snapon boy

I ll have to convince the wife or sell a few rigs.

149 r/c worx /scalerfab Team Driver

Or sell the wife.

[snapon boy]

My wife is a great one. She is a biomedical engineer and a mechanical engineer. She lets me stay home and play while she works

149 r/c worx /scalerfab Team Driver

[Jeepiac]

Originally Posted by snapon boy

My wife is a great one. She is a biomedical engineer and a mechanical engineer. She lets me stay home and play while she works

149 r/c worx /scalerfab Team Driver

I no longer like you Lol.

[Jeepiac]

Originally Posted by CODYBOY

Hey Jon, I have quoted a couple guys on prices for axles and the Codyboy Steering and I don't hear back from them? I don't think that they realize the time and money I put into R&D and building these. I'm not a big shop with a lot of overhead or have a bunch of machines to call on for building. It takes me a good day to build a axle like the one I sent you. I use quality parts and I think what I build is quality products. I'm just a old fart tinkering to support my hobby. I know you step out of the box in some of the things you try. Do some of you guys think my prices are out of line? Help
Ernie

As with anything, you have the people that understand what tit takes to build an original and quality part and then there's the ones that dont even know that sun sets in the West. Run into people all the time that can't understand why it cost so much to get their car fixed. I point at tooling and start explaining what it cost just to tool a shop and maintain it and that if what I'm doing is worth so little why ain't they at home doing it themselves

[Ascender'nMN84]

Originally Posted by snapon boy

My wife is a great one. She is a biomedical engineer and a mechanical engineer. She lets me stay home and play while she works

149 r/c worx /scalerfab Team Driver

My uncle calls that a Scrubbing Bubbles wife. She works hard so you don't have to

Sent from my SM-G930V using Tapatalk

[CODYBOY]

Originally Posted by snapon boy

My wife is a great one. She is a biomedical engineer and a mechanical engineer. She lets me stay home and play while she works

149 r/c worx /scalerfab Team Driver

Hey Fish, I'm sure being a stay at home dad isn't all it is cracked up to be. It's good that you can let all the jokes kind of role off to the side. Besides I know for a fact that you have recipes for some great deserts!!!
Ernie

[snapon boy]

Seriously tho! I do water testing and emissions testing and custom leather work and 3d designs while the kids are in school. With the kids in private school if I go back to work the day care bill would be outstanding.

149 r/c worx /scalerfab Team Driver

[Lucky87]

Originally Posted by Jeepiac

I hated short wheel base crawlers till I was forced to drive one while in Oklahoma at last years RC4WD Scale Challenge. It was love at first squeeze of the trigger. I'm still learning it's characteristics, but it's got a lot of potential.

Oh boo-hoo-hoo. Aren't glad I told you to go ahead and drive it now.

Sent from my SM-G955U using Tapatalk

[Jeepiac]

Originally Posted by Lucky87

Oh boo-hoo-hoo. Aren't glad I told you to go ahead and drive it now.

Sent from my SM-G955U using Tapatalk

You've cost me plenty of money, I know that much!

[Jeepiac]

Got in a quick run before the rain set in this morning, and this Codyboy axle is amazing. The turning radius is crazy on the short little feller and It will go anyplace I point it. Really thinking now that the cheater rigs (team voodoo ottsix) are going to be weeded out that Stumpy just might make a good showing at Crawlapalooza this year Did I name drop a few lines back?
Anyway, Ernie, my hats off to you! While sliding sideways on a slope this extra steering will pull the front end up and out of trouble where it used to just keep sliding down hill, and no swinging out and doing 3 point turns in the tight spots now. Just drive up, crank the wheels and go!

[CODYBOY]

Originally Posted by Jeepiac

Got in a quick run before the rain set in this morning, and this Codyboy axle is amazing. The turning radius is crazy on the short little feller and It will go anyplace I point it. Really thinking now that the cheater rigs (team voodoo ottsix) are going to be weeded out that Stumpy just might make a good showing at Crawlapalooza this year Did I name drop a few lines back?
Anyway, Ernie, my hats off to you! While sliding sideways on a slope this extra steering will pull the front end up and out of trouble where it used to just keep sliding down hill, and no swinging out and doing 3 point turns in the tight spots now. Just drive up, crank the wheels and go!

Nice right up Jon, thanks for the kind words. I'm glad it is living up to your expectations!. Working on Lucky87s front and rears this weekend, along with a couple of the losi scale width axles. Helps support my lavish life style
Ernie

[Jeepiac]

Originally Posted by CODYBOY

Nice right up Jon, thanks for the kind words. I'm glad it is living up to your expectations!. Working on Lucky87s frond and rears this weekend, along with a couple of the losi scale width axles. Helps support my lavish life style
Ernie

Whats it gonna cost me to keep Lee from getting any of your parts? I have to compete against him in October, and I need to one up him

[CODYBOY]

Originally Posted by Jeepiac

Got in a quick run before the rain set in this morning, and this Codyboy axle is amazing. The turning radius is crazy on the short little feller and It will go anyplace I point it. Really thinking now that the cheater rigs (team voodoo ottsix) are going to be weeded out that Stumpy just might make a good showing at Crawlapalooza this year Did I name drop a few lines back?
Anyway, Ernie, my hats off to you! While sliding sideways on a slope this extra steering will pull the front end up and out of trouble where it used to just keep sliding down hill, and no swinging out and doing 3 point turns in the tight spots now. Just drive up, crank the wheels and go!

Originally Posted by Jeepiac

Whats it gonna cost me to keep Lee from getting any of your parts? I have to compete against him in October, and I need to one up him

Well, I don't know Maybe I should open up a bidding war between you two. You know, and then there is always parts that go to Poprivet and Fish that you may need to consider.
Your Codyboy sleeper parts dominance may be coming to an end before it even gets started.
Ernie

[Lucky87]

I guess your getting pay back Jon. I got u into the ascender club now your getting me into codyboy club. So I guess it's a win win.

Sent from my SM-G955U using Tapatalk

[Jeepiac]

I'm fine with Fish and Poprivet beating me, just not Lee LOL!