03-18-2018, 07:34 PM | #21 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Added a little scale flair. Need to make some more. I think it's time to get that 3d printer Sent from my ZTE A2017U using Tapatalk |
Sponsored Links | |
03-18-2018, 07:42 PM | #22 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
I like this body but the tire rubbing is annoying. I think I'm going to change the body to something more acceptable to 4.75" tires. I trimmed it out a little but I don't want to go to far. It's tolerable at stock height but I'd like to lower the body a little more. I don't care for the frame sticking out the bottom so far. I guess I could make some boat sides or something? Sent from my ZTE A2017U using Tapatalk |
03-19-2018, 10:29 AM | #23 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: Ascender Build
Looking good, filled in bed top and ammo cans really adds to it too! Some tire rub is kinda normal in 1:1 and my Vaterra Blazer has a little (I"ve lowered that body) and I didn't want to cut out the wheelwells too much (but did a little trimming too.) Here's Rich's excellent thread on how to lower this body, really looks good with slightly smaller tires/wheels too! How to lower the body/Cage of your K10 or F100 Durok is running some RC4WD 1.7" Raceline beadlocks w/RC4WD Goodyear MT/R 1.7"x4.19" tires w/stock foams, 18t Robinson Racing pinion (to make up for tire size reduction), looks great imo and my past experience with smaller tires has been very good, side-hilling is better and crawling just requires a little different approach, my Axial Honcho was very capable on small 1.9 tires! Forgot to say some sliders tucked up in there would help crawling and complete the look and fill in the voids too! I'm not usually a fan of boatsides. |
03-19-2018, 10:42 AM | #24 | |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build Quote:
The tire rubbing I wouldn't mind but it's bad enough to catch the tire and bind it up. So either different body or smaller tires. I also just ordered an ascender kit. I'm not a blazer fan so I'll probably just sell it and pick up a different body. I want one at 12.3. Thinking either a power wagon or perhaps something else. Not sure exactly yet. Sent from my ZTE A2017U using Tapatalk | |
03-19-2018, 07:30 PM | #25 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
More tinkering. Sent from my ZTE A2017U using Tapatalk |
03-19-2018, 07:42 PM | #26 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Flex shot Sent from my ZTE A2017U using Tapatalk |
03-19-2018, 11:54 PM | #27 |
RCC Addict Join Date: Sep 2015 Location: Australia
Posts: 1,058
| Re: Ascender Build
I like your kangaroo killer! There’s a few old F100’s down under so it’s not an uncommon sight to see them around, many have bullbars too. It’s also not uncommon to hit a roo when out driving! Done it myself many times! K10 Chevys must be few and far between here, don’t even think I have ever seen one... |
03-20-2018, 04:24 AM | #28 |
RCC Addict Join Date: Sep 2015 Location: Australia
Posts: 1,058
| Re: Ascender Build
How did you make that roo killer? Is it steel or plastic, hard to tell, kinda looks 3D printed?
|
03-20-2018, 05:19 AM | #29 | |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build Quote:
I think the reason you don't see many Chevy's is they just made joint ventures with other companies like Holden and Vauxhall instead of exporting or making Ford UK and Ford in Australia, etc. Sent from my ZTE A2017U using Tapatalk | |
03-20-2018, 08:28 PM | #30 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
I made this rear bumper in the same fashion. Also my chassis on the front of my Aschammer. Just don't over heat it or it gets brittle. Sent from my ZTE A2017U using Tapatalk |
03-21-2018, 08:15 PM | #31 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
So the body rubbing got the best of me so I started cutting.... Sent from my ZTE A2017U using Tapatalk |
03-22-2018, 06:02 PM | #32 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Worked out pretty good for lexan. Sent from my ZTE A2017U using Tapatalk |
03-24-2018, 11:54 AM | #33 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Did some more painting and put on a temporary bumper so I can hit the rocks this afternoon or tomorrow. Went and checked out my spot a long the flowage and due to being on the north shore the snow is all gone. Should be a fun time. Last edited by mgputer; 03-24-2018 at 12:00 PM. |
03-25-2018, 09:19 AM | #34 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Some pics of my other ascender project. Sent from my ZTE A2017U using Tapatalk |
03-25-2018, 04:02 PM | #35 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Hit the rocks today. Was only like 35 but tolerable. Was a good time. Got some exercise and fun with the family. Trucks look used now. Knocked off one of my ammunition crates off the back of the f100 but other than that nothing broke. Sent from my ZTE A2017U using Tapatalk |
03-30-2018, 09:55 AM | #36 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
The other dark meat Sent from my ZTE A2017U using Tapatalk |
03-30-2018, 05:11 PM | #37 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Now that my fingers are shot from peeling rubber and putting together the beadlocks and a grill I just bought..... Lol I really hate degluing tires. Looks pretty good though. Just took it out on my rock pile in the back yard and had to wash it off. She was a little muddy. Forgot the phone in the house so I didn't get any pictures outside. Sent from my ZTE A2017U using Tapatalk |
03-30-2018, 05:18 PM | #38 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
As I sit here staring at this thing I wish the body that they used on the on road rig had a longer wheelbase. It would look bad ass! I would combine the body and cage and would rock I think. But it's a little shorter than I would like. Sent from my ZTE A2017U using Tapatalk |
03-30-2018, 05:20 PM | #39 |
Rock Crawler Join Date: May 2012 Location: Central PA
Posts: 553
| Re: Ascender Build
YEs degluing tires does suck!!!! They look nice with those rims and on your truck. I would say it was worth it. |
04-01-2018, 08:35 PM | #40 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: Ascender Build
Ordered more parts! Shocks, a different body, light kits, and a couple other things. Going to also get some codyboy axles soon with the SSD knuckles. Think I'm going to pick up some SSD diff covers also because I painted the stock ones orange and the colors I picked out are candy apple red and silver. I had to change it to something different. Even though I like how it looks I need to make it my own. Sent from my ZTE A2017U using Tapatalk |
Ascender Builds - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New build ascender | jmarsh1976 | Vaterra Ascender | 32 | 01-05-2016 01:14 PM |
Ascender build | Markeje | Vaterra Ascender | 13 | 09-24-2015 09:08 AM |
Ascender Build | seth556 | Vaterra Ascender | 12 | 01-05-2015 03:13 AM |
My Ascender Build | wax | Vaterra Ascender | 1 | 10-22-2014 05:38 PM |
| |