Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Vaterra Scale Rock Crawlers > Vaterra Ascender
Loading

Notices

Thread: How to lower the body/Cage of your K10 or F100

Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2018, 05:00 PM   #1
Sr. Product Developer
 
Rich Trujillo's Avatar
 
Join Date: May 2005
Location: Fontana
Posts: 786
Default How to lower the body/Cage of your K10 or F100

I wanted to share my little hack job i did to lower the K10/F100 Rear cage. This allowed me to lower the cage about 8-9mm. The modification to the lower part of the cage does require little grinding on the posts. You will also need to remove the shock brace tube and use a lock nut to hold the shock mount screw to the shock towers. The shock towers will flex a little but this is required to get the cage support around and below the inner shock mounting nut (once you remove the support tube).
This is a pretty simplified way of lowering the cage and as i mention you will need to take a grinding wheel to some parts of the cage for clearance (cross tube over gear cover, aluminum top plate near shocks, etc) but I've been very happy with the results.

Let me know if you have any questions and i'll do my best to respond as soon as i can.

Thanks,
Rich





Final Result

Last edited by Rich Trujillo; 01-30-2018 at 08:24 AM.
Rich Trujillo is offline   Reply With Quote
Sponsored Links
Old 01-29-2018, 05:09 PM   #2
Newbie
 
Join Date: Oct 2017
Location: Australia
Posts: 28
Default Re: How to lower the body/Cage of your K10 or F100

If I new this earlier I wouldn’t of removed the cage! Great trick!


Sent from my iPhone using Tapatalk
Ascenderbender is offline   Reply With Quote
Old 01-29-2018, 07:06 PM   #3
Quarry Creeper
 
Join Date: Oct 2011
Location: Westport Island
Posts: 404
Default Re: How to lower the body/Cage of your K10 or F100

Excellent!!
Thanks for sharing!


Sent from my iPhone using Tapatalk
skybolt is offline   Reply With Quote
Old 01-30-2018, 07:09 AM   #4
Quarry Creeper
 
Join Date: Aug 2016
Location: Or-eee-gun
Posts: 274
Default Re: How to lower the body/Cage of your K10 or F100

Well, I know what I'm doing when I get home! Thanks for sharing Rich.
OldNTired is offline   Reply With Quote
Old 01-30-2018, 10:04 AM   #5
I wanna be Dave
 
Join Date: Dec 2016
Location: san diego
Posts: 2,723
Default Re: How to lower the body/Cage of your K10 or F100

GREAT POST! no pun intended?

thanks Rich! i don't have a cage but this is good stuff for everyone who does.
Shinchu is offline   Reply With Quote
Old 01-31-2018, 04:34 PM   #6
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: How to lower the body/Cage of your K10 or F100

I was looking at my K10 and realized that the left/right crossbrace can be left in (just cut the two short little dog-leg pieces out) and either shave down the top of the body mount holes in the crossmember or shorten the two vertical pieces where they attach with two screws at bed top level. Leaving in the crossbrace should give it a little more strength for anybody hard on their trucks. Also if you want more of the original bed tube looks, heat the rear cross bar and bend it up to rest on top of rear frame rails again.
Natedog is offline   Reply With Quote
Old 02-01-2018, 09:03 AM   #7
Sr. Product Developer
 
Rich Trujillo's Avatar
 
Join Date: May 2005
Location: Fontana
Posts: 786
Default Re: How to lower the body/Cage of your K10 or F100

Quote:
Originally Posted by Natedog View Post
Leaving in the crossbrace should give it a little more strength for anybody hard on their trucks. )
Technically true but you need to see how i drive outside of the vids lol...I'm pretty brutal on my rigs so far no issues with out the bracing between the towers.
Rich Trujillo is offline   Reply With Quote
Old 02-01-2018, 11:04 AM   #8
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: How to lower the body/Cage of your K10 or F100

Sorry I should’ve been clearer, I meant leaving the plastic molded in brace between the lower cage posts that goes into rear cross member bed/body mount. Cool, I noticed the rock rash all over your truck.
Natedog is offline   Reply With Quote
Old 03-20-2018, 02:39 PM   #9
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: How to lower the body/Cage of your K10 or F100

This should be sticky, great free cheap mod!
Natedog is offline   Reply With Quote
Old 01-28-2019, 12:02 PM   #10
Newbie
 
Join Date: Jan 2019
Location: Elkton
Posts: 18
Default Re: How to lower the body/Cage of your K10 or F100

It's been almost a year since someone has posted here but I'm trying to figure out why my cage does not do what the OP's cage did. There is a step in the plastic down tube that prevents the tube from going any lower. I trimmed the side braces off but before I lost all rigidity I decided to check the fitment. Do I need to remove that whole lower section where the OP shows where to cut or am I just doing something wrong.

Last edited by CrashRecovery; 01-28-2019 at 12:04 PM.
CrashRecovery is offline   Reply With Quote
Old 01-29-2019, 10:34 AM   #11
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: How to lower the body/Cage of your K10 or F100

Quote:
Originally Posted by CrashRecovery View Post
There is a step in the plastic down tube that prevents the tube from going any lower. I trimmed the side braces off but before I lost all rigidity I decided to check the fitment. Do I need to remove that whole lower section where the OP shows where to cut or am I just doing something wrong.
Looking at Rich's pictures, you can trim the mount holes down lower allowing the post to sit lower while still leaving the cross piece between the bed posts hanging down. Then drill new holes for the pins to retain it. I like this way better, but it's your truck.

Or you could do like is drawing and cut out the cross piece on the bed posts, spread them slightly and insert farther into the bed mount holes on the rear crossmember, then drill new holes for the retaining pins.
Natedog is offline   Reply With Quote
Old 01-29-2019, 11:08 AM   #12
RCC Addict
 
Join Date: Sep 2017
Location: The OC
Posts: 1,615
Default Re: How to lower the body/Cage of your K10 or F100

I like it, might have one this would work on.

As an aside, I was able to RAISE mine for the bigger Proline body by using bumper spacers to that same rear support member, and an add-on L-bracket at the rear of the frame rails for the posts.

The front members of the cage as also cut back about a half inch to shorten it overall. This is on a WB4 chassis, the bodies for longer wheelbases are much longer and taller than the stock K10.

The Vaterra plastic is great to work with, forgiving and very strong. We used to call this 'kit bashing'.





Browneye is offline   Reply With Quote
Old 01-29-2019, 01:49 PM   #13
Newbie
 
Join Date: Jan 2019
Location: Elkton
Posts: 18
Default Re: How to lower the body/Cage of your K10 or F100

Quote:
Originally Posted by Natedog View Post
Looking at Rich's pictures, you can trim the mount holes down lower allowing the post to sit lower while still leaving the cross piece between the bed posts hanging down. Then drill new holes for the pins to retain it. I like this way better, but it's your truck.



Or you could do like is drawing and cut out the cross piece on the bed posts, spread them slightly and insert farther into the bed mount holes on the rear crossmember, then drill new holes for the retaining pins.
The problem is there is a pretty drastic step or shift from center for the section of the down post below the cross brace. That section where Rich shows to cut away is where that shift is. Cutting the post above this would lower the body way too much. I'll post a picture later when I get to work.

Sent from my SM-N960U using Tapatalk
CrashRecovery is offline   Reply With Quote
Old 01-29-2019, 04:00 PM   #14
Newbie
 
Join Date: Jan 2019
Location: Elkton
Posts: 18
Default Re: How to lower the body/Cage of your K10 or F100

Here is the vertical bars I was talking about. Even with the shock tower strut removed there is no way to go any lower without removing the lower section.

Sent from my SM-N960U using Tapatalk
CrashRecovery is offline   Reply With Quote
Old 02-03-2019, 11:03 PM   #15
Newbie
 
Join Date: Jan 2019
Location: Elkton
Posts: 18
Default Re: How to lower the body/Cage of your K10 or F100

Its been a few days.... anyone have any thoughts on why the OP was able to do this? My next option is to trim the upper portion of the supports and redrill them so I can screw them back together. Only thing is the body is going to need some reworking as the tires are going to seriously rub. Besides the blazer only needing minor trimming does the C10 need serious body trimming with the stock wheels when this is done?
CrashRecovery is offline   Reply With Quote
Old 02-03-2019, 11:46 PM   #16
I wanna be Dave
 
Join Date: Aug 2016
Location: Orange County, CA
Posts: 3,643
Default Re: How to lower the body/Cage of your K10 or F100

He may have taken a bit off the top instead. The bottom seems the same as yours as far as I can tell, but he possibly could have taken a bit off the top of that piece.
soze is offline   Reply With Quote
Old 02-03-2019, 11:58 PM   #17
RCC Addict
 
Join Date: Sep 2015
Location: Australia
Posts: 1,058
Default Re: How to lower the body/Cage of your K10 or F100

Have a close look at the OP's last picture and you can see that he must have cut down the post holes in the rear chassis.
You can still see the post holes sticking out below the classic on the underside, but you cannot see them on the top side.
Yeti.stealth is offline   Reply With Quote
Old 02-05-2019, 03:55 AM   #18
Rock Stacker
 
Join Date: Apr 2018
Location: GR, MI
Posts: 55
Default Re: How to lower the body/Cage of your K10 or F100

Flip the rear cross member / cage mount upside down.
touch racing is offline   Reply With Quote
Old 02-05-2019, 03:52 PM   #19
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: How to lower the body/Cage of your K10 or F100

Quote:
Originally Posted by Yeti.stealth View Post
Have a close look at the OP's last picture and you can see that he must have cut down the post holes in the rear chassis.
You can still see the post holes sticking out below the classic on the underside, but you cannot see them on the top side.
Yes.

Quote:
Originally Posted by touch racing View Post
Flip the rear cross member / cage mount upside down.
It's same either way, trim it as Rich appears to have done in his pics.
Natedog is offline   Reply With Quote
Old 02-07-2019, 03:42 AM   #20
Newbie
 
Join Date: Jan 2019
Location: Elkton
Posts: 18
Default Re: How to lower the body/Cage of your K10 or F100

Quote:
Originally Posted by Natedog View Post
Yes.







It's same either way, trim it as Rich appears to have done in his pics.
I did trim it as Rich did. Still wont go..... I took off the rear most bar so you can see that it wont fit. Did they change how this part mounts to the rest of the cage?
CrashRecovery is offline   Reply With Quote
Reply



How to lower the body/Cage of your K10 or F100 - Similar Threads
Thread Thread Starter Forum Replies Last Post
'72 K10 body vs '66 F100 Cultus Vaterra Ascender 13 03-23-2017 09:43 PM
K10 rear cage dimensions? 1967Typhoon Vaterra Ascender 3 03-03-2017 07:03 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com