| |
07-25-2020, 10:16 PM
| #1 |
| Newbie Join Date: Mar 2019 Location: Altadena
Posts: 47
|  k5
Any ideas on wheel wells and interior for 12.3 Ascender with Axial C10 body? Sent from my iPhone using Tapatalk |
|  |
| Sponsored Links | |
| | |
|
07-26-2020, 11:05 AM
| #2 |
| RCC Addict Join Date: Sep 2015 Location: Southern Maine
Posts: 1,024
| Re: k5
I used old hummus containers from the grocery story. Any plastic container you can easily cut into shape will work. Some guys will make them out of styrene plastic. Some make them 3D printed. I’ve even made some out of black gorilla tape doubled up on itself and taped/screwed onto the chassis. Any of these work and make a big difference in appearance. Ben |
|
| |
|
07-26-2020, 11:06 AM
| #3 |
| Newbie Join Date: Mar 2019 Location: Altadena
Posts: 47
| Re: k5
Cool thanks Sent from my iPhone using Tapatalk |
|
| |
|
07-26-2020, 02:24 PM
| #4 |
| Newbie Join Date: Mar 2019 Location: Altadena
Posts: 47
| Re: k5  Sent from my iPhone using Tapatalk |
|
| |
|
07-26-2020, 02:25 PM
| #5 |
| Newbie Join Date: Mar 2019 Location: Altadena
Posts: 47
| Re: k5  Sent from my iPhone using Tapatalk |
|
| |
|
07-27-2020, 02:32 PM
| #6 |
| I wanna be Dave  Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: k5
Yes, as Ben said and yours turned out quite nice, good job! I used bottom of automotive windshield washer fluid bottle (1 gallon) cut in half and then to shape, couple holes, scuff sanded, black paint and bam!  |
|
| |
 |
| |
Linear Mode
