Twin Hammers Scale comp build
 

Getting ready to Build my Twin Hammers in to a Scale Comp rig!! "thumbsup"

http://farm9.staticflickr.com/8053/8...39d29908b7.jpg
Twin Hammers 001 by 650schultz, on Flickr

http://farm9.staticflickr.com/8080/8...7cab3c6128.jpg
Twin Hammers 002 by 650schultz, on Flickr


Time to Dig in!!

Re: Twin Hammers RECON G6 build
 

Sweet!!!

Re: Twin Hammers RECON G6 build
 

What do you plan on doing to it?

Re: Twin Hammers RECON G6 build
 

Up Grade Speedo, Stonger Servo, Motor Upgrade and a Winch, to start.

Suggestions? <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

Re: Twin Hammers RECON G6 build
 

http://farm9.staticflickr.com/8356/8...d84965a1f2.jpg
Twin Hammers 004 by 650schultz, on Flickr

Removal of the Stock system!

http://farm9.staticflickr.com/8493/8...50c98e43b1.jpg
Twin Hammers 003 by 650schultz, on Flickr

Look at all the Room!!!"thumbsup"

Re: Twin Hammers RECON G6 build
 

Sounds good lol. Till new parts start coming out, not too sure. I'll be checkin in this.

Re: Twin Hammers RECON G6 build
 

Oh my! Wow John, looks like you guys are stepping up! So, when is the Vaterra Event? I will come watch, though out of respect I'll leave the Green machines at home :)

Re: Twin Hammers RECON G6 build
 

I suggest seeing if you can use a smaller servo on the transmission to save space. You could also make your own aluminum body panels and add some scale light bars.

Re: Twin Hammers RECON G6 build
 

Is it 48p ? kinda hard to tell from the pics. What motor/ esc combo are you putting in it? , I have Tekin 17.5, 10.5, pro4 3300 or 4000 sitting here ready to go and not sure what to try first. I dont have any 5mm 48p so I might have to go with the 2 pole first.

Re: Twin Hammers RECON G6 build
 

http://farm9.staticflickr.com/8492/8...31e9dbcdcf.jpg
Twin Hammers 008 by 650schultz, on Flickr

Since I am going to run a shorty 2s lipo Battery, it gives me room to put the Tekin FX-R Speedo in the back tray.

http://farm9.staticflickr.com/8508/8...f88c58cf84.jpg
Twin Hammers 009 by 650schultz, on Flickr

I am planning on runing a 27 turn brushed motor for Smoothness in those tight sections.

Re: Twin Hammers RECON G6 build
 

Yes its 48 pitch

Re: Twin Hammers RECON G6 build
 

The Servo is already a small servo, I plan on leaving that stock, at this time.

I like the Idea of making a Aluminum Side body panels. and I know Vanquish is making light bars for the roof!!

Re: Twin Hammers Scale comp build
 

http://farm9.staticflickr.com/8503/8...7dd9293d25.jpg
010 by 650schultz, on Flickr

Using the Spektrum 6030 Servo giving the speed and torque that I am looking for, 278 oz in. and I will be using a 6030 as the servo winch also.


http://farm9.staticflickr.com/8369/8...136e9b53c2.jpg
011 by 650schultz, on Flickr

Losi Crawler Servo Arm gives me the clearance as well as the strength need in the rocks

Re: Twin Hammers Scale comp build
 

really curious as to where you can fit a servo winch!

Hey how would you compare the low gears speed compared to "other" scalers we are familiar with?

Sent from my SCH-I535 using Tapatalk 2

Re: Twin Hammers Scale comp build
 

Why the name change on the thread title? Not allowed to run this rig in a G6?

Re: Twin Hammers Scale comp build
 

Where the esc used to be. I'd run esc and rx in sealed box on left side of pan and 1300-2200 3s lipo cross-wise in the rear battery tray.

Re: Twin Hammers Scale comp build
 

hey if you get a chance, the width and a wheelbase measurement would be sweet "thumbsup"

Re: Twin Hammers Scale comp build
 

I plan on putting the servo winch where the Speedo was.

Re: Twin Hammers Scale comp build
 

Wheelbase is 11.6 Width 9.75