Why must I be such an RC whore.

[Soulo747]

This hobby is worse than a serious drug habit.

[scottanthony]

Oh, I agree, hustlin for your next rig is like taking from the church collection plate...Oh wait, I dont go to church..

[701 Technique]

Gotta get that fix! I remember giving handys behind wallyworld just to get a wraith.... Dark days man, dark days

[Soulo747]

Aaaaaaaand one lap around the living room = shifting servo shot

[MR.VERTICAL]

I would have thought that the place you bought it from should have told you to adjust your end points before you use it.

[Soulo747]

Originally Posted by MR.VERTICAL

I would have thought that the place you bought it from should have told you to adjust your end points before you use it.

It died WHILE I was adjusting them, and no... My local Hobbytown is just a bunch of old helo guys. Nice guys, no knowledge on surface stuff.

[chino63]

Originally Posted by Soulo747

My local Hobbytown is just a bunch of old helo guys.

They like Hello Kitty?

[northkona]

Originally Posted by 701 Technique

Gotta get that fix! I remember giving handys behind wallyworld just to get a wraith.... Dark days man, dark days

LMFAO !!

[northernerbill]

I've worked the servo problem, its not end points, or the bedding in of the O ring.

It's living room carpets.

So to all new owners, after unboxing, and switching on please peel up your living room carpet and bin it.

[binaryterror]

Originally Posted by Soulo747

Aaaaaaaand one lap around the living room = shifting servo shot

Originally Posted by Soulo747

It died WHILE I was adjusting them, and no... My local Hobbytown is just a bunch of old helo guys. Nice guys, no knowledge on surface stuff.

How many stories you gonna tell before we get the truth?

1 Lap around, or while you were setting the EPA's? Can't be both.

[Soulo747]

Well lets see, asshole. While I was adjusting my servo, I was intermitently driving the vehicle to test it's shifting capability. Thus, the failure occured sometime between me holding the car and ****ING with it, or driving the car and ****ING with it.

Is this an acceptable explanation for you, Detective Cocksmoke?

[BADASSPONY]

^^lol :banghead:

[Soulo747]

I dunno about you, but i work hard for my money and i'm not to keen on just "chalking up the failure to poor quality control" or just saying "oh well"... if i go plop down 400 bucks on something i expect it to work. Case in point it doesnt matter if i was adjusting the epa, driving the car, or rubbing my ballsack on the hood.... the thing was 5 minutes out of the box and it quit.

[binaryterror]

Originally Posted by Soulo747

Well lets see, asshole. While I was adjusting my servo, I was intermitently driving the vehicle to test it's shifting capability. Thus, the failure occured sometime between me holding the car and ****ING with it, or driving the car and ****ING with it.

Is this an acceptable explanation for you, Detective Cocksmoke?

Wow somebody woke up rough this morning.

So in 1 lap around a lets give you credit, 30x30 living room, that means you drove it only 94 feet.

Why not set end points with the wheels off the ground, you know like how you should be. This allows you to see the shifting mechanism and servo and listen or notice strain and how it is working. Start at no epa, then slowly add it in.

Once EPA is set, then and only then place car on surface to drive where you will not be able to hear any issues to save yourself the headache of going to your LHS or even dealing with Horizon Support.

Both your Local Store and Horizon will likely be able to help you on a warranty item as well as informing you the procedure to properly set the EPA.

[Soulo747]

Originally Posted by binaryterror

Wow somebody woke up rough this morning..

HELL YA I SLEPT TERRIBLE! Damn stupid old mattress. I need to get me a sleep number bed.

Then my boss blows up in my face when i walk in the office, so i was ALREADY butt hurt!

Then you hurt my wittle feelings even more.

I've been told both methods? Set em with the wheels engaged on a surface and set em with the car on a stand? Now i have no clue which is the right one!?

So when the nice folks at horizon send me my new servo, how should i tackle this?

[bigred22]

Originally Posted by Soulo747

This hobby is worse than a serious drug habit.

I agree but u can put this habbit to good use

[Soulo747]

My shitty ipad pics make it even worse.

[bigred22]

Originally Posted by Soulo747

I dunno about you, but i work hard for my money and i'm not to keen on just "chalking up the failure to poor quality control" or just saying "oh well"... if i go plop down 400 bucks on something i expect it to work. Case in point it doesnt matter if i was adjusting the epa, driving the car, or rubbing my ballsack on the hood.... the thing was 5 minutes out of the box and it quit.

Yes got agreed with u there but everyone on here should already know of this problem and have a spare servo that uk will work on hand. When I bought my wraith the esc was all screwed up right out of the box and I was pissed. But ended up being a simple fix.

[scottanthony]

Originally Posted by Soulo747

HELL YA I SLEPT TERRIBLE! Damn stupid old mattress. I need to get me a sleep number bed.

Then my boss blows up in my face when i walk in the office, so i was ALREADY butt hurt!

Then you hurt my wittle feelings even more.

I've been told both methods? Set em with the wheels engaged on a surface and set em with the car on a stand? Now i have no clue which is the right one!?

So when the nice folks at horizon send me my new servo, how should i tackle this?

When you get the new servo, E-bay it.. cause another factory one will just go out also..

[Soulo747]

Just read Harley's thread, i have an extra axial servo plate and a savox 1256tg that im gonna try.