IRIE Products

[Sr.Irie]

Irie's Twin hammer ball bearing bell crank steering & upright shock tower. I2


All parts 6061 T6 aluminum
Each bellcrank rides on two precision ball bearings for a no slop no maintenance steering
Shock tower is designed for G-made 85mm XD Piggyback shocks with no internal limiter or external bump stop to take advantage of the full travel of the shock
Geometry of linkage has been 3D modeled to have as little bumpsteer as possible, almost not measurable


What is included?
6061 Top Plate and steering arms riding on ball bearings, assembled
Composite Shock tower,
Center link consisting of two ball ends and a turnbuckle
2-M3x25mm screws, for the tie rods to bellcrank
2-M3x20mm screws, for the bellcrank arms
2-M3x14mm screws, for mounting F of top plate / F of shock tower
2-M3x12mm screws, for mounting R of top plate
2-M3x6mm screws, for mounting R of shock tower to top plate
4-M3 nylon lock nuts

For the upper shock mount reuse the factory cantilever posts
Recommended servo horn part numbers:
TLR1555 for 23T
TLR1556 for 24T
TLR1557 for 25T

GCM Tower Steering kit

Included in kit
Steering arms made from 6061 riding on ball bearing two per arm
2-6061 stand offs
2-M3x22mm screws
2-M3x25mm screws
4-M3 Nylock nuts
2-M3 Large washers
2-Offset ball ends
1-Center link
Here is an install video that GCM was nice enough to do. THANK YOU



Irie's Race Prepped Twin Hammers CVD Axles

Axles are cryoed for strength
then reassembled with 4037 chromoly cross pin
and lubed with molybdenum disulfide.
All together it makes a smooth running and pretty bomb proof axle.
Recommend Vaterra HD outdrives to go with the axle's part #VTR232062

Irie open rear diff axles.


Also can do complete setup rear differentials. PM if interested


Irie Products Wheel Bearing Kit



This kit covers al wheel bearings needed for the Twin Hammers wheel bearings front and rear.
These bearings are precision quality rubber sealed bearings made in the U.S.A. not overseas.
Includes
2: 6mm x 12mm
6: 5mm x 10mm


For Prices Click Here IRIE PRODUCTS

[Sr.Irie]

IRIE Products Videos

[grunt95]

will this work with the GCM shock tower plate like the derwood steering set up? looks great, hope to see more twin hammer parts from you!

[littletoyboy]

Originally Posted by grunt95

will this work with the GCM shock tower plate like the derwood steering set up? looks great, hope to see more twin hammer parts from you!

Wondering the same thing. I already have the gcm shock tower and love it. Just need to fix the steering now

[grunt95]

Originally Posted by littletoyboy

Wondering the same thing. I already have the gcm shock tower and love it. Just need to fix the steering now

Me too!

[Sr.Irie]

I am sure I could get it to if I had a GCM tower.
If someone would be willing to send there GCM tower to me for a little R&D to get everything placed right.

The DD upgrade is in the works now and if I could find the Blue Monkey tower I have I would do that as well.

[Andyking]

Would it be possible to get a pm with the price please. Also would you be willing to ship to the UK?

[scsbronco]

Ill be on board once i get the rest of my truck dialed in.

[Sr.Irie]

Originally Posted by Andyking

Would it be possible to get a pm with the price please. Also would you be willing to ship to the UK?

If you are willing to pay shipping with insurance I will ship anywhere.

PM sent

[Trazhcan]

Ditto but I'm in Colorado, I already have the gcm plate so I just need the bellcrank and hardware.

[Sr.Irie]

There is a couple people I am talking to about sending their GCM tower to me so I can build the kit for it.

[Sr.Irie]

Finishing up the kits and what do know the sun came out, figured needed more testing. yep it works


Official Irie Products Test Driver Testing at the compound

[grunt95]

so how is the GCM version coming along?

[Sr.Irie]

Originally Posted by grunt95

so how is the GCM version coming along?

I have heard nothing from the guy that said he was going to send me his tower to R&D with. So I have not started

[littletoyboy]

I would send you my tower, but I would hate to tear it down and watch it set that long. I love this little thing.

[grunt95]

Originally Posted by Sr.Irie

I have heard nothing from the guy that said he was going to send me his tower to R&D with. So I have not started

You can use mine, my rig isent even ready and wont be ready for some time.

[Sr.Irie]

That would be great
I would not have to have it for long PM sent

[Pockets70]

Just received my kit and all I can say is WOW!!! The top plate looks bulletproof! Very clean design and EXCELLENT fit and finish! My only complaint is that it's not on my rig already!

[mnickolson]

I am waiting on one that will fit my BlueMonkey Upright Shock Mount.......Hint Hint.....LOL

[Sr.Irie]

Originally Posted by mnickolson

I am waiting on one that will fit my BlueMonkey Upright Shock Mount.......Hint Hint.....LOL

Well then you will be happy to know I just ordered a Blue monkey tower and a GCM tower to R&D with. So not only will I have the kits for both very soon but I will have a Blue monkey and a GCM tower setup with my steering that I will not have a use for.