RCCrawler Forums - Rear swaybar

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Vaterra Twin Hammers (http://www.rccrawler.com/forum/vaterra-twin-hammers/)

- - Rear swaybar (http://www.rccrawler.com/forum/vaterra-twin-hammers/556254-rear-swaybar.html)

Lochrie2

02-05-2016 10:42 AM

Rear swaybar

It seems like my rear swaybar hits the stock battery tray before the shocks bottom out anybody else have this issue?

VTHDAN4467

02-05-2016 10:52 AM

Re: Rear swaybar

I don't have the sway bar, but I am pretty sure I have seen on here before that people have had that problem

89redranger

02-05-2016 11:43 AM

Re: Rear swaybar

Yep. Dremel the tray.

Lochrie2

02-05-2016 11:51 AM

Re: Rear swaybar

I was gonna do that but the battery is still in the way might try and bend the swaybar out http://i68.tinypic.com/14nlc7q.jpg[/IMG]

Lochrie2

02-05-2016 11:55 AM

Re: Rear swaybar

Or maybe cut the swaybar back?

OSRC	02-05-2016 12:57 PM

Re: Rear swaybar

I run the battery inline... Just bent mine out a bit on each side, and it clears everything. Not going to help much with your battery mounted crossways though. Might have to cut it back.

Sr.Irie

02-05-2016 08:17 PM

Re: Rear swaybar

Quote:

Originally Posted by Lochrie2 (Post 5439921)

It seems like my rear swaybar hits the stock battery tray before the shocks bottom out anybody else have this issue?

Do not start cutting the battery tray.
There is just enough room if you do a little bending of the sway bar and if I remember right I toke a little off length. I run the large battery (shorty pack) in the tray and it clears the tray and battery fine, It just takes some tuning.

Lochrie2

02-05-2016 08:23 PM

Re: Rear swaybar

Was able to bend them out just a bit, problem solved!

All times are GMT -6. The time now is 07:41 PM.