|
| LinkBack | Thread Tools | Display Modes |
01-17-2017, 10:52 PM | #1 |
Newbie Join Date: Jun 2016 Location: Mckees Rocks (Pittsburgh)
Posts: 28
| VTH rear MIP X-Duty CVD $10 Close out |
Sponsored Links | |
01-18-2017, 12:34 AM | #2 |
Quarry Creeper Join Date: Apr 2016 Location: Cape cod
Posts: 294
| Re: VTH rear MIP X-Duty CVD $10 Close out
Thanks, bought 2
|
01-18-2017, 01:27 AM | #3 |
Newbie Join Date: Jan 2017 Location: Bellingham
Posts: 20
| Re: VTH rear MIP X-Duty CVD $10 Close out
Woah! super thanks. Also bought 2!
|
01-18-2017, 04:26 PM | #4 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: VTH rear MIP X-Duty CVD $10 Close out
Thanks for the heads up. Bought 3 for basically the price of one.
|
01-19-2017, 04:07 AM | #5 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: VTH rear MIP X-Duty CVD $10 Close out
bought me 3 also. can always use these on other rigs (since I already have one on my twin hammers)
|
01-19-2017, 05:49 AM | #6 |
Newbie Join Date: Apr 2016 Location: Chile
Posts: 42
| Re: VTH rear MIP X-Duty CVD $10 Close out
Thanks ! +1 |
01-19-2017, 07:13 AM | #7 |
Quarry Creeper Join Date: Apr 2016 Location: Cape cod
Posts: 294
| Re: VTH rear MIP X-Duty CVD $10 Close out
Anybody know what these will fit without issue. I'd grab one for my my bomber but I think it'll be too short. How about an scx10?
|
01-20-2017, 07:31 PM | #8 | |
Rock Crawler Join Date: Jan 2008 Location: Lehigh Valley, Pa
Posts: 768
| Re: VTH rear MIP X-Duty CVD $10 Close out Quote:
Diameter is same for scx, but I believe these will be a little short for scx regular wheelbase. Sent from my iPhone using Tapatalk | |
01-21-2017, 01:57 AM | #9 |
Newbie Join Date: Nov 2016 Location: Belgium
Posts: 1
| Re: VTH rear MIP X-Duty CVD $10 Close out
Yes thanks for the heads up, especially since I'm new to rc and started with the twin hammers. I would have missed out on an important improvement. Also ordered two, just in case.
|
01-26-2017, 06:02 PM | #10 |
Rock Stacker Join Date: Nov 2005 Location: Yay area
Posts: 50
| Re: VTH rear MIP X-Duty CVD $10 Close out
can anyone confirm if this will work when you have the extended length rear arms on the twin hammer?
|
01-27-2017, 10:38 AM | #11 |
Rock Stacker Join Date: Jan 2014 Location: Belleville, Ontario, Canada
Posts: 80
| Re: VTH rear MIP X-Duty CVD $10 Close out
I have yeti trailing arms on my Twin. I used the male section of a Yeti MIP and joined it with the MIP I had on the twin before I stretched it. The reason I mixed them was one Shaft uses two set screws were the other has one threaded pin that goes through the outdrive.
|
01-27-2017, 08:08 PM | #12 |
Quarry Creeper Join Date: Sep 2010 Location: appleton
Posts: 357
| Re: VTH rear MIP X-Duty CVD $10 Close out
I believe they are sold out now Sent from my LG-H900 using Tapatalk |
01-29-2017, 12:31 AM | #13 |
Newbie Join Date: Apr 2014 Location: STL
Posts: 43
| Re: VTH rear MIP X-Duty CVD $10 Close out |
01-29-2017, 04:48 AM | #14 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: VTH rear MIP X-Duty CVD $10 Close out
Glad I got my order of 3 sets in. Showed up yesterday.
|
01-29-2017, 10:11 PM | #15 |
Newbie Join Date: Apr 2014 Location: STL
Posts: 43
| Re: VTH rear MIP X-Duty CVD $10 Close out |
02-04-2017, 02:59 AM | #16 |
Rock Stacker Join Date: Jan 2017 Location: Adelaide
Posts: 90
| Re: VTH rear MIP X-Duty CVD $10 Close out
How strong is the stock vaterra one? Likely to break?
|
02-04-2017, 05:37 AM | #17 |
Quarry Creeper Join Date: Sep 2010 Location: appleton
Posts: 357
| Re: VTH rear MIP X-Duty CVD $10 Close out
I've beat on mine for a year now and it hasn't broken yet. But you never know. Nice to have something very strong and keep the stock for a spare. Sent from my LG-H900 using Tapatalk |
02-14-2017, 11:01 PM | #18 |
Newbie Join Date: Jun 2016 Location: Mckees Rocks (Pittsburgh)
Posts: 28
| Re: VTH rear MIP X-Duty CVD $10 Close out
OK everyone I need your help. I can not remove the old CVD because the person that sold it to me (never buy on ebay again) broke the tip of his driver off in the grub screw. any ideas? |
02-15-2017, 05:41 PM | #19 | |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: VTH rear MIP X-Duty CVD $10 Close out Quote:
I think you are looking at some drilling. Get a bit about the size of the grub screw and give it a shot. If you have a drill press it would help. | |
02-15-2017, 11:36 PM | #20 |
Newbie Join Date: Jun 2016 Location: Mckees Rocks (Pittsburgh)
Posts: 28
| Re: VTH rear MIP X-Duty CVD $10 Close out
No drill press. just hand drill. Any recommendation on drill bit type
|
VTH rear MIP X-Duty CVD $10 Close out - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MIP CVD available | Hogass83 | Vaterra Ascender | 12 | 11-10-2014 08:26 PM |
Thread Tools | |
Display Modes | |
| |