|
| LinkBack | Thread Tools | Display Modes |
07-22-2017, 01:23 PM | #21 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Edit picture says4000kv but mines is 3200kv.
|
Sponsored Links | |
07-27-2017, 10:27 AM | #22 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Tried the chassis mounted battery plate. However due to the aftermarket roof panel, my battery cannot fit thru the window. So skipped the idea of a chassis mounted battery. Also couldn't miss the interior and driver figure. Anyway tried something different. Aluminium battery holder with 2s shorty pack. Some stick on weight to compensate the servo and motor on one side. Removed the spare Wheel. And tried some 8mm Wheel wideners. Wich where send with the wheels. Really like the handling now. Also put stiffer inserts in the tyres (took then out of the stock tyres). Big difference. |
07-27-2017, 12:37 PM | #23 |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,905
| Re: WesleyRoy's Twin Hammers
Nice buggy man! Is that a battery tray that I might be able purchase somewhere?
|
07-27-2017, 12:38 PM | #24 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Look for shapeways.com scorched parts.
|
07-27-2017, 12:39 PM | #25 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
But it is especcially made for the steering suspension set up i have also.
|
07-27-2017, 01:11 PM | #26 | |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,905
| Re: WesleyRoy's Twin Hammers Quote:
I also run the same Scorched suspension/steering setup in one of mine. So far it has been solid. Thx | |
07-27-2017, 01:13 PM | #27 | |
Quarry Creeper Join Date: Aug 2014 Location: Orange County
Posts: 372
| Re: WesleyRoy's Twin Hammers Quote:
Sent from my SM-G920T using Tapatalk | |
07-27-2017, 01:15 PM | #28 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
I think hé meant the chassis mounted battery plate i installed before the amf mount.
|
07-27-2017, 01:32 PM | #29 | |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,905
| Re: WesleyRoy's Twin Hammers Quote:
| |
07-27-2017, 01:33 PM | #30 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Aha yes that's the amf one. |
07-27-2017, 10:47 PM | #31 |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,905
| Re: WesleyRoy's Twin Hammers After taking a closer look at it, I am not sure it will work. I was considering using it with my Blue Monkey +1 trailing arm setup but I don't think it will be compatible.
|
07-27-2017, 11:03 PM | #32 |
Quarry Creeper Join Date: Aug 2014 Location: Orange County
Posts: 372
| Re: WesleyRoy's Twin Hammers
Oh ok. Its becautof those brackets that relocate the shocks, right? If you really wanted to you could probably cut some new aluminum brackets to make the geometry right. I also modified my battery tray so I could keep the sway bar by making custom sway bar mounts. Sent from my SM-G920T using Tapatalk |
07-28-2017, 06:36 AM | #33 |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,905
| Re: WesleyRoy's Twin Hammers
Does the AMF tray relocate the shock's top mount at all?
|
07-28-2017, 08:42 AM | #34 |
Quarry Creeper Join Date: Aug 2014 Location: Orange County
Posts: 372
| Re: WesleyRoy's Twin Hammers |
08-03-2017, 03:01 AM | #35 |
Quarry Creeper Join Date: Dec 2010 Location: Pontypool, wales
Posts: 364
| Re: WesleyRoy's Twin Hammers I realise the pic isn't the actual motor but it looks like it's got s 5mm output shaft is this correct ? Iv got the 5700 kv inthere at the moment and would like to replace it with a 1410 sensored system Iv got lying around but this has a 5mm shaft , is there a pinion that will work ? Iv got a 1.0 mod pitch 14T pinion that with fit but will this work with the stock spur ? Sent from my iPhone using Tapatalk |
08-03-2017, 03:19 AM | #36 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Oh yes your right mine doesnt have a 5mm shaft. Have enough power with this set up. And doesnt cog.
|
08-03-2017, 03:20 AM | #37 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Stock spur is 48p so guess that wont line up with a mod1 pinion
|
08-06-2017, 10:02 AM | #38 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Had a blast driving my TH, with the wider wheelbase and shorty in the rear. Also the scorched suspension and steering set up kept holding on and doing great even after some hard crashes. |
08-12-2017, 07:25 AM | #39 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's Twin Hammers
Have to look for some 32p spurs because even my kevlar spur didnt last long. |
08-12-2017, 01:05 PM | #40 |
Pebble Pounder Join Date: May 2014 Location: fernandina beach
Posts: 111
| Re: WesleyRoy's Twin Hammers
I tried to get the Robinson Racing 87 tooth black steel for mine but every shop is sold out. You may try Hobby Welt in Germany, they are the RRP distributor in Europe. I had to settle for the Hot Racing aluminum spur and Robinson aluminum pinion.
|
WesleyRoy's Twin Hammers - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Twin Hammers cage on SCX chassis bouncer conversion aka Bounce Hammers! | mce076 | 1.9 Scale Rigs | 36 | 07-25-2015 02:16 AM |
My Twin...Twin Hammers build start | sanny632 | Vaterra Twin Hammers | 8 | 03-09-2014 12:01 PM |
Savage00's Twinny Twin Twin Hammers | Savage00 | Vaterra Twin Hammers | 16 | 09-19-2013 08:09 PM |
Twin Hammers in Twin Cities? | 89XJ | Minnesota | 7 | 05-06-2013 02:59 PM |
Thread Tools | |
Display Modes | |
| |