Go Back   RCCrawler Forums > Vendors > Vendors Market > Vendors Electronics
Loading

Notices

Thread: Team Brood LE 45t DOUBLE! Designed for the XR10!

Reply
 
LinkBack Thread Tools Display Modes
Old 08-15-2010, 03:00 PM   #1
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default Team Brood LE 45t DOUBLE! Designed for the XR10!

Team Brood Limited Edition 45 Turn Doubles!

Specifically designed for Axial XR10! Get yours now for your shiny new XR10.

Only 40 Motors are being made, Sold in Pairs only... 20 pairs.....20 lucky souls!

$134.98 plus Shipping $7 shipping in the USA (international rates vary)


Only 45x2 in the world...724 CM of copper per wind, while a normal 45t has 642 CM. Wound by the best winder in the world.

Motors are engraved on bottom, Forward (F) or Reverse (R). One motor is wired in reverse for the axle that needs it.

Shaft is engraved with wind.

Motors are Matched for Maximum Performance...Dyno tuned to be in sync with each other.


Here are the specs

2 Magnet High Torque Can
Standup Brushes
3mm Armature
7.5mm Comm
45 Turns of Dual 24.5 AWG Wire

In the event there is a mad rush for these, I will be taking orders from existing Team Brood Customers first. I hope everyone understands in the event a few get turned away. Other than, in order of request on the thread is how they will be given out.....a PM from me confirms your pair.

Motors will ship on the appx on August 25th.

No Coupon Codes, No Dealers, No Group Discounts, No Team Discounts.. ...though lap dances from hot chicks may sway me.

Here are some pics for your pleasure!






Last edited by EddieO; 08-15-2010 at 03:02 PM.
EddieO is offline   Reply With Quote
Sponsored Links
Old 08-15-2010, 03:09 PM   #2
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

VERY nice Eddie!
JeremyH is offline   Reply With Quote
Old 08-15-2010, 03:15 PM   #3
Pebble Pounder
 
Join Date: Sep 2007
Location: Pittsburgh
Posts: 198
Default

Sounds great! I will take a pair. Let me know when you know
sjg90125 is offline   Reply With Quote
Old 08-15-2010, 03:23 PM   #4
Picky Fab'r/Acetal Junky
 
Offroader5's Avatar
 
Join Date: Jul 2006
Location: Arizona Desert/AJ
Posts: 3,073
Default

I'd jump on these if I didn't already have a pair of your 35x2 Warrior LE's through JP.
Offroader5 is offline   Reply With Quote
Old 08-15-2010, 05:57 PM   #5
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

Only 15 left.....better hurry:P

Later EddieO
EddieO is offline   Reply With Quote
Old 08-15-2010, 11:31 PM   #6
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

12 left.....didn't expect to sell 8 in one day!

Later EddieO
EddieO is offline   Reply With Quote
Old 08-17-2010, 03:54 PM   #7
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

11 sets left......open to anyone now, as Team Brood Customers have had their few days to gobble them up..

Later EddieO
EddieO is offline   Reply With Quote
Old 08-17-2010, 04:19 PM   #8
Sometimes, I make things.
 
crazyorigin's Avatar
 
Join Date: May 2009
Location: Mt. Upton
Posts: 1,043
Default

How do you think these would work on a Super MOA? Should i get in on these or hope you do some of the quad magnet motors in Double. Still dont have motors for my super project.... i am a slacker.
crazyorigin is offline   Reply With Quote
Old 08-17-2010, 04:47 PM   #9
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

These would work great in a super....45t is my most popular wind for a super.....these are just a normal 45t on crack....

Later EddieO
EddieO is offline   Reply With Quote
Old 08-18-2010, 10:51 AM   #10
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

10 sets left.....


I would like to note, that one of my competitors has took it upon himself to makes some claims regarding how winding an armature works...

I've posted multiple times on how packing on more copper correctly produces a more powerful motor. I've shown results, along with posting all the math.

Changing the Arm blank can also have effects....going down blank sizes is not just so we can fit on bigger wire, we do that all the time on the same size blanks, like our regular 35t is wound with 21 AWG on a 5mm blank, while everyone else uses 21.5 AWG....

I guess maybe the other company should work on at least soldering on the brushes, instead of leaving the eyelet brushes on that came from japan......or better yet, try actually winding building the motor yourself before you act like YOU actually do anything other than put your sticker on it.

Sorry for the rant...

Later EddieO
EddieO is offline   Reply With Quote
Old 08-18-2010, 11:35 AM   #11
Sometimes, I make things.
 
crazyorigin's Avatar
 
Join Date: May 2009
Location: Mt. Upton
Posts: 1,043
Default

I will hopefully place an order in the next couple days for a set of these. I have heard of the power of thr Br00d motors and need to try it for myself. I was bummed when my order for a pair of 40t CreepT's couldn't be filled over a year ago because of you know what, I am glad that you are back making motors, I may get the urge to buy more if these are as impressive as I have heard they are. Keep up the good work bud, you know we like big power!
crazyorigin is offline   Reply With Quote
Old 08-18-2010, 11:48 AM   #12
RCC Addict
 
Join Date: Jun 2008
Location: Nunya Idaho...
Posts: 1,559
Default

Best on the market for sure! I will ONLY run Team Brood motors in my compers... If I didnt already have some of your killer 40t's, Id grab some.
slowngreen is offline   Reply With Quote
Old 08-18-2010, 11:53 AM   #13
Sometimes, I make things.
 
crazyorigin's Avatar
 
Join Date: May 2009
Location: Mt. Upton
Posts: 1,043
Default

I don't mean to clutter up the thread w/ a dozen posts, but are these dual or quad magnet cans? In this thread it says 2 magnet cans, but in the giveaway in the XR10 section it says they are Quad magnet cans. Thanks.
crazyorigin is offline   Reply With Quote
Old 08-18-2010, 12:23 PM   #14
I wanna be Dave
 
Join Date: Apr 2007
Location: Arlington, Washington
Posts: 2,303
Default

These are two magnet cans.....the motors being give away are an entirely different motor...different can, arm, etc...

Later EddieO
EddieO is offline   Reply With Quote
Old 08-18-2010, 12:33 PM   #15
Quarry Creeper
 
Join Date: Nov 2008
Location: sacramento
Posts: 438
Default

just sent you some mula, Thanks for these!
cascade crawler is offline   Reply With Quote
Old 08-18-2010, 01:25 PM   #16
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

Quote:
Originally Posted by EddieO View Post
I would like to note, that one of my competitors has took it upon himself to makes some claims regarding how winding an armature works...

I've posted multiple times on how packing on more copper correctly produces a more powerful motor. I've shown results, along with posting all the math.

...

I guess maybe the other company should work on at least soldering on the brushes, instead of leaving the eyelet brushes on that came from japan......or better yet, try actually winding building the motor yourself before you act like YOU actually do anything other than put your sticker on it.

Sorry for the rant...

Later EddieO
I couldn't agree more! More copper density always gets better results. Now who is this company that is claiming to be building their motors all in-house?

Motors have a sweet spec list Eddie, 20 lucky souls indeed! You guys will be getting one nice bit of kit with these.
JohnRobHolmes is offline   Reply With Quote
Old 08-18-2010, 01:49 PM   #17
Rock Crawler
 
Join Date: Apr 2008
Location: Wrightsville, PA
Posts: 627
Default

pm sent!
sgil2001 is offline   Reply With Quote
Old 08-18-2010, 05:56 PM   #18
Newbie
 
Join Date: Oct 2008
Location: Puyallup
Posts: 2
Default

I'll take a set please! pm sent.
Black Dragon is offline   Reply With Quote
Old 08-18-2010, 06:49 PM   #19
Rock Crawler
 
Join Date: Oct 2008
Location: Somewhere near the lake in IL
Posts: 975
Default

pm sent
WarTrader is offline   Reply With Quote
Old 08-19-2010, 05:56 AM   #20
I wanna be Dave
 
Join Date: Sep 2009
Location: Nor Cal
Posts: 2,213
Default

Please put me down for a set Eddie. I'll PM you too. Thanks!


Paypal sent

Last edited by Rig Rocker; 08-19-2010 at 03:48 PM.
Rig Rocker is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com