No Brainer BEC

[heyok]

Originally Posted by Alexander_0_1

It would, or it has in the past, but I've been tinkering with 4s.

Then I suppose you would have to run a second BEC or a 3S pack.

[jlsandkes]

I know there are ways that I can do this, but being that I am looking at this as a "No Brainer" can you do anything to make it waterproof? Thanks.

[heyok]

Originally Posted by jlsandkes

I know there are ways that I can do this, but being that I am looking at this as a "No Brainer" can you do anything to make it waterproof? Thanks.

The way it is put together, all you need to do to seal out water is to put some silicone or something into both open ends of the heat shrink.

I have been leaving the waterproofing up to the customer with this product.
The reason why is because of the pot. If the customer decides to adjust the voltage, a hole must be made through the heat shrink with a screw driver to turn the pot. Then it would no longer be waterproof. Of course, the customer could seal that with silicone and all would be good.

Sure, I could do the initial waterproofing. Just ask when you order it and I will take care of it. Remember that if you make an adjustment afterwards, you have to seal it up again.

[MaFoDes]

Damned man, you're fast....
All the way from Canada to the Netherlands in 5 days....

Thanks for the service!

[heyok]

Originally Posted by MaFoDes

Damned man, you're fast....
All the way from Canada to the Netherlands in 5 days....

Thanks for the service!

Welcome!

[GTSLOW]

There's probably no way I could get one of these by Friday is there? (US 66503)

[obxbronco]

Originally Posted by GTSLOW

There's probably no way I could get one of these by Friday is there? (US 66503)

He is out of town till tomorrow

[heyok]

Originally Posted by GTSLOW

Daggit!

Sorry.
Should be able to get one shipped tomorrow. Send me a pm to order.

Thanks,
Al

[socal_crawler]

Just got my no brainer bec from Al. I was worried at first if Im going to receive it before this weekend but as always, Al delivered!

[RC Racer]

Pm sent

[heyok]

Originally Posted by RC Racer

Pm sent

None received. It didn't go through.

[oklamopar]

So where do I order the 2 channel BEC?

[MaFoDes]

I was at a Modelbuildersfair last weekend. Giving demonstrations on crawling. Promoting the hobby. You will be pleased to hear that i talked to some people who had powerissues, i 've send them to your website

[heyok]

Originally Posted by oklamopar

So where do I order the 2 channel BEC?

Just send me a PM and I will help you!

Originally Posted by MaFoDes

I was at a Modelbuildersfair last weekend. Giving demonstrations on crawling. Promoting the hobby. You will be pleased to hear that i talked to some people who had powerissues, i 've send them to your website

Thank you for the help!

[xv-townboy]

Hi Al

For turning up voltage..Does the pot get turned a full 360 per volt approx.?.Thanks again

[heyok]

Originally Posted by xv-townboy

Hi Al

For turning up voltage..Does the pot get turned a full 360 per volt approx.?.Thanks again

Couldn't really say as it would be a guess. I've used a few different vendors for the pot and they are probably different.
Check the output voltage with a volt meter. Connect it to the red and black output wires.

Now is the perfect excuse to buy a volt meter if you don't have one already

[xv-townboy]

Sounds good..I have an elcheapo but I need an excuse to hit crappy tire today so all is good..Thanks

[oklamopar]

Have both 1 and 2 channel bec's Great Products!!!!!
hurry and get yourself one!

[Chumley54]

Can you do XT60 connectors instead of Deans?

[heyok]

Originally Posted by Chumley54

Can you do XT60 connectors instead of Deans?

I can if you want to send me a set! Happy to do it.