RCCrawler Forums

losikid · 03-22-2011, 09:14 PM

I am now building and selling dual esc adapters, also know as wantAmix. Originally designed and built by wantAsummit, however he no longer has the time to continue offer such a great product so i have picked up the product.

Features-

-Front Dig
-Rear Dig
-Proportional Mixing (Biasing)
-Small (less than a square inch in area)
-Simple to use
-Indicator lights

Requirements-

-Two esc's
-Two Channels
....-Main throttle channel (trigger/stick)
....-Aux channel with Linear/proportional control
-Small Phillips or Flat Head screw driver (to adjust neutral points)

For more information use the following links

Tech Thread

Instructions

Original wantAmix product page

Vid testing proportional control thanks to kwkride

Vid on how to setup DX3R Thanks to kwkride

Current pricing is $40 USD + $5 shipping to cont USA

Click Here to Order

losikid · 03-22-2011, 09:24 PM

Compatibly:

Just for dig dual esc dig
-Any radio with 3 pos 3rd channel
--Dx3R
--3pmx
--dx3e
--and more

Dig and proportional control
-Must have a 3 pos 3rd channel, and another switch/knob that has a linear rate/effect.
--Dx3r
--3pm-x
--DX3C

JeremyH · 03-23-2011, 07:42 AM

It is good to see you pick these up!

losikid · 03-23-2011, 10:04 PM

8 Left, in this batch. Will have more in a few weeks.

crawl rookie · 03-24-2011, 10:12 AM

I want one, useable for the dx3 (the old one) ?

losikid · 03-24-2011, 12:32 PM

Quote:

Originally Posted by crawl rookie

I want one, useable for the dx3 (the old one) ?

I have no experience with the dx3. Does it have a 3 pos switch? (if yes then you have f/r dig) Can a step rate or other linear means be assigned to another 3 pos switch, knob, or rotary switch. (if yes then you have proportional as well)

Once i get some time i will sit down and try and figure out which radios are compatible. But right now i am swamped with everyday tasks, custom radios, and now these adapters.

losikid · 03-24-2011, 06:21 PM

7 left

losikid · 03-25-2011, 04:07 PM

5 Left, oh these can be 3tp adapters too, just lmk, if you been wanting those.

I won't have more till servo leads come in from overseas, 2-3 weeks out.

jebster · 03-26-2011, 06:29 AM

i have a wantAsummit tq-true-3-pos adaptor already and love it. i'm using it on my xr10 for the punk dig. i was curious if this module would work with a tq2.4 radio. use the 3-pos adaptor to give me a 3 position switch and use the 2-pos switch for the proportional control.

Stavin Trucks · 03-26-2011, 09:38 AM

Im very interested in one of these.

losikid · 03-26-2011, 10:44 AM

Quote:

Originally Posted by jebster

i have a wantAsummit tq-true-3-pos adaptor already and love it. i'm using it on my xr10 for the punk dig. i was curious if this module would work with a tq2.4 radio. use the 3-pos adaptor to give me a 3 position switch and use the 2-pos switch for the proportional control.

No, i don't think that will work.

losikid · 03-26-2011, 10:16 PM

looks like 4 left, it will be a few weeks before i get more

losikid · 03-26-2011, 11:10 PM

Ok i forgot to tell everyone who has ordered, i don't have labels, so all the servo plugs have a marking in them with a engraver tip, a F,3,2,R

F=front esc; 3=ch3; 2=ch2; R=Rear esc.

Sorry if this cause any confusion.

Stavin Trucks · 03-27-2011, 08:53 AM

Money sent for one unit. Thanks

saniel68 · 03-27-2011, 10:42 AM

Just ordered mine!

Nice Job!!

losikid · 03-27-2011, 11:58 AM

I'm SOLD OUT, unless something good happens won't have more till two weeks, this Japanese earthquake halted the production of parts i use.

I will except pre-orders though, this will guarantee you a adapter out of this next batch, and will be shipped out 24 hours after i get parts in. Approximately it will take 3 weeks to get to you.

losikid · 03-28-2011, 10:26 PM

All orders from friday till now will ship tomorrow (tuesday) morning,

Thanks for the orders, can't believe how fast these flew by, If you didn't get one out of this batch i will have more in the next two weeks,

However i will discount 5 of them 10% off because they will have two green led's and a red, not a green, yellow, red like normal. This is because i could not order yellow led's, on backorder till late next month, probably japans incident is the cause of slowed production.

Also Check out the new Site, Its still a work in progress, so please notify me of any glitches, or bugs.

OverKillRC.com

Chappy4o · 03-29-2011, 08:35 PM

your vid for setup on the dx3r isnt a working link.

losikid · 03-29-2011, 08:57 PM

I'll fix it here in a second...here it is without the formatting http://www.youtube.com/watch?feature...&v=LvU02Bvgr14

losikid · 03-29-2011, 08:59 PM

works now

thanks for letting me know

03-22-2011, 09:14 PM	#1
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS I am now building and selling dual esc adapters, also know as wantAmix. Originally designed and built by wantAsummit, however he no longer has the time to continue offer such a great product so i have picked up the product. Features- -Front Dig -Rear Dig -Proportional Mixing (Biasing) -Small (less than a square inch in area) -Simple to use -Indicator lights Requirements- -Two esc's -Two Channels ....-Main throttle channel (trigger/stick) ....-Aux channel with Linear/proportional control -Small Phillips or Flat Head screw driver (to adjust neutral points) For more information use the following links Tech Thread Instructions Original wantAmix product page Vid testing proportional control thanks to kwkride Vid on how to setup DX3R Thanks to kwkride Current pricing is $40 USD + $5 shipping to cont USA Click Here to Order Last edited by losikid; 05-16-2011 at 08:26 AM.

03-22-2011, 09:24 PM	#2
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	Compatibly: Just for dig dual esc dig -Any radio with 3 pos 3rd channel --Dx3R --3pmx --dx3e --and more Dig and proportional control -Must have a 3 pos 3rd channel, and another switch/knob that has a linear rate/effect. --Dx3r --3pm-x --DX3C Last edited by losikid; 07-26-2011 at 11:45 AM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/vendors-electronics/307196-dual-esc-adapter-dig-mixing-biasing-most-3ch-radios.html
Posted By	For	Type	Date
Home	This thread	Refback	10-07-2011 10:02 AM
Dual ESC	This thread	Refback	10-05-2011 03:57 AM
Annedeckes LCC MOA (Coming alles doch ganz anders .... aber immer noch soon ) - 2,2" Losi - rockcrawler.de	This thread	Refback	10-05-2011 02:02 AM

03-23-2011, 07:42 AM	#3
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	It is good to see you pick these up!

03-23-2011, 10:04 PM	#4
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	8 Left, in this batch. Will have more in a few weeks.

03-24-2011, 10:12 AM	#5
crawl rookie Rock Crawler Join Date: Sep 2005 Location: IDK Posts: 852	I want one, useable for the dx3 (the old one) ?

03-24-2011, 06:21 PM	#7
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	7 left

03-25-2011, 04:07 PM	#8
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	5 Left, oh these can be 3tp adapters too, just lmk, if you been wanting those. I won't have more till servo leads come in from overseas, 2-3 weeks out.

03-26-2011, 06:29 AM	#9
jebster I wanna be Dave Join Date: May 2010 Location: The east coast Posts: 2,599	i have a wantAsummit tq-true-3-pos adaptor already and love it. i'm using it on my xr10 for the punk dig. i was curious if this module would work with a tq2.4 radio. use the 3-pos adaptor to give me a 3 position switch and use the 2-pos switch for the proportional control.

03-26-2011, 09:38 AM	#10
Stavin Trucks Quarry Creeper Join Date: Jan 2011 Location: Augusta Posts: 306	Im very interested in one of these.

03-26-2011, 10:16 PM	#12
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	looks like 4 left, it will be a few weeks before i get more

03-26-2011, 11:10 PM	#13
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	Ok i forgot to tell everyone who has ordered, i don't have labels, so all the servo plugs have a marking in them with a engraver tip, a F,3,2,R F=front esc; 3=ch3; 2=ch2; R=Rear esc. Sorry if this cause any confusion.

03-27-2011, 08:53 AM	#14
Stavin Trucks Quarry Creeper Join Date: Jan 2011 Location: Augusta Posts: 306	Money sent for one unit. Thanks

Sponsored Links

03-27-2011, 10:42 AM	#15
saniel68 Quarry Creeper Join Date: Jul 2008 Location: Reno Posts: 388	Just ordered mine! Nice Job!!

03-27-2011, 11:58 AM	#16
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	I'm SOLD OUT, unless something good happens won't have more till two weeks, this Japanese earthquake halted the production of parts i use. I will except pre-orders though, this will guarantee you a adapter out of this next batch, and will be shipped out 24 hours after i get parts in. Approximately it will take 3 weeks to get to you.

03-28-2011, 10:26 PM	#17
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	All orders from friday till now will ship tomorrow (tuesday) morning, Thanks for the orders, can't believe how fast these flew by, If you didn't get one out of this batch i will have more in the next two weeks, However i will discount 5 of them 10% off because they will have two green led's and a red, not a green, yellow, red like normal. This is because i could not order yellow led's, on backorder till late next month, probably japans incident is the cause of slowed production. Also Check out the new Site, Its still a work in progress, so please notify me of any glitches, or bugs. OverKillRC.com

03-29-2011, 08:35 PM	#18
Chappy4o Rock Crawler Join Date: May 2010 Location: Albuquerque Posts: 821	your vid for setup on the dx3r isnt a working link.

03-29-2011, 08:57 PM	#19
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	I'll fix it here in a second...here it is without the formatting http://www.youtube.com/watch?feature...&v=LvU02Bvgr14

03-29-2011, 08:59 PM	#20
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	works now thanks for letting me know

RCCrawler Forums

Thread: Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS