|
subscribed need this for my new scaler |
Good Day Al Just to let you know that I finally had time to install the controler for the winch.8) Everythink is perfect now and working as it should."thumbsup" Thank you for the great working product."thumbsup""thumbsup""thumbsup" I recommend this controler to everyone with winch problem and doing business with Al was a pleasure and shipping even faster.8)"thumbsup" Bullit |
Great talking with you Al, I appreciate the help and look forward to working with you."thumbsup" You provide one hell of a product that is highly needed. |
I'll take two PM sent |
Quote:
Al |
Updated the first post. Added a link to the servo winch. |
Looks like good stuff I'm going to need one of ur moa controllers and bec here pretty soon. |
Quote:
|
|
Updated the first post with a new product. Added http://www.rccrawler.com/forum/vendo...ml#post3412322 |
Updated the first post with a new product. Added: http://www.rccrawler.com/forum/vendo...ml#post3422050 |
Can't say enough about Al, great guy and makes a killer product. Here are a couple little videos of his stuff in action on my Honcho <object width="420" height="315"><param name="movie" value="http://www.youtube.com/v/78tITjuii7w?version=3&hl=en_US&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/78tITjuii7w?version=3&hl=en_US&rel=0" type="application/x-shockwave-flash" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object> <object width="420" height="315"><param name="movie" value="http://www.youtube.com/v/-_sga0zU3Ik?version=3&hl=en_US&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/-_sga0zU3Ik?version=3&hl=en_US&rel=0" type="application/x-shockwave-flash" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object> |
Re: HeyOK's RC Electronics items (all in one place) Just installed the "Remote Switch for LED Lighting" in my Dingo, set it up on the AUX channel, reconfigured the "A" switch on my DX3C to two position and it works like a charm. Have to order another for the Wraith. "thumbsup" Thanks Al |
Re: HeyOK's RC Electronics items (all in one place) Updated the first post with a new product. Added: http://www.rccrawler.com/forum/vendo...ontroller.html |
Re: HeyOK's RC Electronics items (all in one place) any suggestions for a winch controller? I use a DX6i with the elevator joystick blended through the gear switch for an 'on and off' button. When the switch is in the 'on' position, I move the joystick up or down to control 'in or out' of the winch. I just cooked the stock controller board yesterday, so I rigged up a circuit board from an old servo just as a temporary fix. I basically un-soldered the motor from the board and soldered in jumper wires that feed the 3R Racing winch and the pigtail just plugs into the Rx. I had to manually center the pot on the board and glue it in place but it still gives a tiny bit of creep. |
Re: HeyOK's RC Electronics items (all in one place) This one Winch Controller for Radio with Three Position Channel is a replacement for your 3R controller. If you like, I can supply one with a JST connector so it will just plug right in to the winch without any soldering. Send me a PM and I will get you hooked up. |
Re: HeyOK's RC Electronics items (all in one place) Hi Al Received my winch controllers today! In and done! Working great! Nice doing business with you"thumbsup" Have a good one! Thanks Don |
Re: HeyOK's RC Electronics items (all in one place) Where do I sign up??? |
Re: HeyOK's RC Electronics items (all in one place) Quote:
|
| All times are GMT -6. The time now is 06:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com