RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Vendors Electronics (http://www.rccrawler.com/forum/vendors-electronics/)
-   -   Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More (http://www.rccrawler.com/forum/vendors-electronics/335255-flysky-gt3b-modded-3-8-channels-dual-esc-4ws-mixing-plus-more.html)

losikid 09-04-2011 07:26 PM

Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
For less than $100 you can have a a radio with 8 channels and all the features you could ever use. I can do this by reflashing the firmware in the Flysky GT3B.

For a full list of up-to-date features please vist this web page

http://www.overkillrc.com/gt3bfeatures.htm

My current pricing

$70 - Base radio (FW upgrade only)

+$17.50 for a New Voltage Regulator (50% more battery life)

+$10.00 to add a Bearing to the Steering wheel. To ensure a liftetime of smoothness

+$20.00 for the 2S lipo Mod. Balances out the radio very well, rechargeable.

+$10.00 for another rx 3ch or 6ch

+$15.00 for shipping in USA

To order please visit my website, www.overkillrc.com or follow the link below

http://www.overkillrc.com/products.h...roduct=5583397

If you already have a Flysky GT3B then please see this page so you can modify your own

http://www.overkillrc.com/products.h...=0&sort=normal

Thanks for looking. If you have any questions post them up, i'll do my best to answer them.

DwaneO 09-23-2011 11:22 PM

Do you sell just the recievers?
I bought 2 from HobbyPartz , but one seems to be bad....
I would order another one from them , but they ship UPS and every time i've ordered from them, UPS sends it to the wrong house.
I just need a 3 ch.
Ohh yea , how about that 2 cell LIPO too?


Dwane

losikid 09-24-2011 12:03 AM

I'll take a look at what i have laying around...but yea i think have a 3ch somewhere, 12.50 shipped sound fair?

I have 8ch rx's too.

As for the lipo, i might have one, i have quite afew, but i think their all sold with pre-hacked units. Tomorrow evening i'll look through orders and how many i have and let you know.

Francois 10-31-2011 02:16 PM

Hell, I'd like to know if the lipo batt is still unavailable?


---
I am here: http://maps.google.com/maps?ll=50.058265,8.589087
Axial Wraith and Losi SCTE

losikid 10-31-2011 04:04 PM

Quote:

Originally Posted by Francois (Post 3356668)
Hell, I'd like to know if the lipo batt is still unavailable?


---
I am here: Google Maps
Axial Wraith and Losi SCTE

Yep, and i doubt i'll be bringing them back. USPS didn't like it when i mentioned lipo awhile back:shock:

bongrips420 03-14-2012 10:18 PM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
do you have any in stock, just looked at the install vid and it looks pretty easy. i have a gt3b and want 4ws on my wraith

losikid 03-15-2012 06:23 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Quote:

Originally Posted by bongrips420 (Post 3629795)
do you have any in stock, just looked at the install vid and it looks pretty easy. i have a gt3b and want 4ws on my wraith

What install vid?

Francois 03-15-2012 07:33 AM

Quote:

Originally Posted by losikid (Post 3630092)
What install vid?

Yes, it s right, you must do a video of "how to set up my great system hacked by Losikid"


---
I am here: http://tapatalk.com/map.php?riqo4i
Sent from my iPad using Tapatalk

bongrips420 03-15-2012 03:27 PM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Quote:

Originally Posted by losikid (Post 3630092)
What install vid?

oops i mean the instructions thing, taking apart the radio and soldering on the 4 pin.

N of NORWAY 03-22-2012 03:11 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Hi
Can you operate two winches 2x(3pos) and two different light circuits ?

losikid 03-22-2012 04:26 PM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Quote:

Originally Posted by N of NORWAY (Post 3642759)
Hi
Can you operate two winches 2x(3pos) and two different light circuits ?

this doesn't even come close to pushing the limits on the gt3b"thumbsup"

N of NORWAY 03-23-2012 02:23 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Sweet will be ordering one of these!!!

smeesho 03-19-2013 12:14 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Can u give me a price for the radio that will do 4 wheel steering as well as run dig with 3 position switch, steering mod,lipo thanks, mitchn

losikid 03-19-2013 12:39 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Quote:

Originally Posted by smeesho (Post 4235878)
Can u give me a price for the radio that will do 4 wheel steering as well as run dig with 3 position switch, steering mod,lipo thanks, mitchn

Home - OverkillRC

gtiguy 04-05-2013 06:36 PM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
ok have all that now need to know how to use it.. or find a clear way to deceifer what to do now that the firmware has been updated

Hi-Intentionz 04-06-2013 08:31 AM

Can your radio make the MFC unit from tamyia work if it does ill buy one with all the upgrades perks doesnt matter how much it costs. Lmk

IQLogic 04-20-2013 02:39 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
I have 8ch Turnigy 9X receiver.
How can I set up 4WD (2x ESC) & 4WS on GT3B? Is it even possible? Many thanks for you answers

idaho 11-21-2013 12:24 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
I got on your website to order a gt3b but didn't see the Lipo option, is it no longer available?

Richterat83 12-21-2013 05:43 AM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Trying to order a hacked gt3c but no option on the site to buy

Also can't send you a pm.

Crawl in Az 01-14-2014 05:26 PM

Re: Flysky GT3B Modded for 3-8 channels, Dual Esc & 4WS Mixing, Plus More
 
Just placed an order on your site for "the works" (firmware, regulator and bearing) Looking forward to making the mod.


All times are GMT -6. The time now is 08:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com