RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Vendors Electronics (http://www.rccrawler.com/forum/vendors-electronics/)
-   -   SSD free spool Ox Power Winch! (http://www.rccrawler.com/forum/vendors-electronics/561373-ssd-free-spool-ox-power-winch.html)

RPP Hobby 04-07-2016 05:33 PM

SSD free spool Ox Power Winch!
 
New free spool Ox Power Winch from SSD! Modeled after the legendary Warn 8274 1:1 winch.

http://rpphobby.com/v/vspfiles/templ...%20600x450.jpg

http://rpphobby.com/v/vspfiles/templ...%20600x450.jpg

http://rpphobby.com/v/vspfiles/templ...%20600x450.jpg

CNC machined
Aluminum case
Hardened steel gears
Scale design
Free spool using spring loaded button
Motor connector plug is compatible with RC4WD winch controllers
Mounting plate has same mounting locations as RC4WD winches
Fits SSD Hawse Fairlead (SSD00013)
Fits SSD bumpers (SSD00012, SSD00046, SSD00051)
Fits RC4WD Warn Hawse Fairlead

Specs
Height: 44.3mm
Width: 66.0mm
Depth: 24.5mm
Weight: 91g

In stock now! SSD Ox Power Winch (Free Spool)

Grizzly4x4 04-07-2016 06:01 PM

Re: SSD free spool Ox Power Winch!
 
Perfect timing! I needed to place an order! :shock:

Looks a lot like the Quicksand winch. Beautiful! "thumbsup"
How much can it lift and how much voltage can it handle?

Highmark 04-07-2016 06:41 PM

Re: SSD free spool Ox Power Winch!
 
Been hoping for this for a long time. Killer work SSD.

J.Peart 04-07-2016 06:52 PM

Re: SSD free spool Ox Power Winch!
 
do you have spec's on how much it will pull?

Capwn 04-07-2016 07:17 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by J.Peart (Post 5481969)
do you have spec's on how much it will pull?

$150 out of your wallet, No happy ending even :(

Grizzly4x4 04-07-2016 08:14 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Capwn (Post 5481981)
$150 out of your wallet, No happy ending even :(

You shouldn't take it so seriously. I bet there is a happy ending. :ror:

nissan_driver24 04-07-2016 08:23 PM

Re: SSD free spool Ox Power Winch!
 
I guess I'll have to see how this one works against a Quicksand winch...

nissan_driver24 04-07-2016 08:26 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by limegalodon (Post 5482020)
Will this work with HeyOk winch controllers?


Sent from my iPad Air 2 using Tapatalk

A winch is essentially a motor, so if your previous winch controller controls a motor it should work with this one.

Grizzly4x4 04-07-2016 08:29 PM

Re: SSD free spool Ox Power Winch!
 
The specs on RPP's site say that an RC4WD or Heyok controller is recommended.

Szczerba 04-07-2016 08:35 PM

Re: SSD free spool Ox Power Winch!
 
Super awesome and rad!!!!!!!!!!


Quote:

Originally Posted by Capwn (Post 5481981)
$150 out of your wallet, No happy ending even :(

Guess you don't want to know the price of the original Quicksand winch then!

fr8cture 04-07-2016 08:37 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Szczerba (Post 5482034)
Super awesome and rad!!!!!!!!!!




Guess you don't want to know the price of the original Quicksand winch then!

original quicksand had videos showing how much it can pull. This doesnt even have a spec listed. I'll wait to see if its worth it. "thumbsup"

Highmark 04-07-2016 08:40 PM

Re: SSD free spool Ox Power Winch!
 
Just guessing but based on the size of the motor I doesn't look like a servo winch but larger than your typical gear motor winch. Should set somewhere between a servo winch and a gear motor winch in terms of power.

Grizzly4x4 04-07-2016 08:45 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Highmark (Post 5482048)
Just guessing but based on the size of the motor I doesn't look like a servo winch but larger than your typical gear motor winch. Should set somewhere between a servo winch and a gear motor winch in terms of power.

Based on the pics of it on the Deadbolt, it looks to me like the dimensions are the same as the Quicksand and that would make it a servo motor under that motor cover.
Just guessing though.

Highmark 04-07-2016 08:48 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by limegalodon (Post 5482047)
the original price for the QuickSand 8274 is $225 I think


Sent from my iPad Air 2 using Tapatalk

The O.G. Quicksand was massively underpriced.

Highmark 04-07-2016 08:54 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Grizzly4x4 (Post 5482053)
Based on the pics of it on the Deadbolt, it looks to me like the dimensions are the same as the Quicksand and that would make it a servo motor under that motor cover.
Just guessing though.

You would probably know better than me :ror:

I'm thinking it looks a little short both in terms of width (of the motor) and height (of the winch - I'm thinking gear set wouldn't have enough room ) for a servo. Also if I where to build one and try to make a decent margin of go with the much cheaper non-servo option.

nissan_driver24 04-07-2016 09:02 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Grizzly4x4 (Post 5482053)
Based on the pics of it on the Deadbolt, it looks to me like the dimensions are the same as the Quicksand and that would make it a servo motor under that motor cover.
Just guessing though.

I agree with ya, but hopefully it isn't a little motor with a bunch of plastic around it... It looks a lot better than most of the winches out there on the market except for the quicksand. Kinda surprised they didn't let the lever touch the brake wheel.

Grizzly4x4 04-07-2016 09:03 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by Highmark (Post 5482067)
You would probably know better than me :ror:

I'm thinking it looks a little short both in terms of width (of the motor) and height (of the winch - I'm thinking gear set wouldn't have enough room ) for a servo. Also if I where to build one and try to make a decent margin of go with the much cheaper non-servo option.

Look at the pic mounted on the Deadbolt. The winch is sitting below the top of the framerails, down inside the bumper. If it was sitting on top of the rails it would be taller than the hood, just like a Quicksand. 8)

limegalodon 04-07-2016 09:20 PM

Will this work with HeyOk winch controllers?
It says you can use rc4wd or HeyOk winch controllers. But I don't think you can connect that little white plug to the HeyOk controller. Correct me if I'm wrong. I am considering one for my JK

This question might sound a little dumb but, will I need another BEC for the winch and winch controller? I am still not sure if I should run it off a separate battery or just connect it to the main battery.

Can someone please help me out? Do I need another BEC for the winch?


Sent from my iPad Air 2 using Tapatalk

Grizzly4x4 04-07-2016 09:27 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by nissan_driver24 (Post 5482079)
I agree with ya, but hopefully it isn't a little motor with a bunch of plastic around it... It looks a lot better than most of the winches out there on the market except for the quicksand. Kinda surprised they didn't let the lever touch the brake wheel.

I hope so too.

Yea, I'm a little bummed the lever doesn't bounce off the brake wheel also. :ror: oh well, small complaint.
Didn't stop me from ordering mine, guess we will see soon. "thumbsup"

Grizzly4x4 04-07-2016 09:33 PM

Re: SSD free spool Ox Power Winch!
 
Quote:

Originally Posted by limegalodon (Post 5482096)
Can someone please help me out? Do I need another BEC for the winch?


Sent from my iPad Air 2 using Tapatalk

Many factors come into play. It depends on the power of the servo and the winch. Sometimes you can get away with running steering and a winch off the same BEC. You can try it, if the truck shuts down when you are winching and turning at the same time, you need another BEC.
I always run a BEC just for the winch so I don't have to worry about it.


All times are GMT -6. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com