RCCrawler Forums

badger · 09-13-2005, 01:23 AM

Quote:

Originally Posted by kevinlongisland

your not going to build anything if you don't get off the damned computer!

i bet jason has a comment about where you can stick the drive shaft.

Damn you know me too well! I didn't build **** tonight.

I going to wait until I get my axles cause this thing looks very easy to put together.

FrankyRizzo · 09-13-2005, 07:06 AM

Use a stampede tranny. They're lighter then the maxx ones.

badger · 09-13-2005, 08:29 AM

Quote:

Originally Posted by FrankyRizzo

Use a stampede tranny. They're lighter then the maxx ones.

That's snot what I heard.

pullstarter · 09-18-2005, 09:37 PM

has anyone got pics of how the bottoms of the shocks mount up on the NN? Can't find any :neutral:

badger · 09-18-2005, 10:04 PM

Quote:

Originally Posted by pullstarter

has anyone got pics of how the bottoms of the shocks mount up on the NN? Can't find any :neutral:

Here you go.

pullstarter · 09-18-2005, 10:06 PM

awesome! thanks badger

just gotta hope and pray that my axles turn up now, dam post office have lost em somewhere

Eagle-Mark · 09-25-2005, 10:51 PM

Can I buy just the chassis? No links etc...

kevinlongisland · 09-26-2005, 08:07 AM

Quote:

Originally Posted by Eagle-Mark

Can I buy just the chassis? No links etc...

Send me a PM or email and we'll work something out.

wheelhaus · 09-27-2005, 01:00 PM

I just ordered one today! Now i just need axles, motors, pinions, and wheels/tires.

With a standard stick pack, could the links bind on the pack in the shortest wheelbase setting?

kevinlongisland · 09-27-2005, 06:38 PM

Quote:

Originally Posted by bigdsti

I just ordered one today! Now i just need axles, motors, pinions, and wheels/tires.

With a standard stick pack, could the links bind on the pack in the shortest wheelbase setting?

Thank you for purchasing one of our kits, it is appreciated. No, the links do not hit the battery when the truck is setup for 14" wheelbase. This is because when the truck articulates, the links only move up. There is no down movement of the links.

Mad Hatter · 10-24-2005, 06:42 PM

So how is the schedule looking for the next batch in Nov? If I order one now, will you ship it when it is ready or do I just need to wait until they become available?

kevinlongisland · 10-24-2005, 06:49 PM

Quote:

Originally Posted by Mad Hatter

So how is the schedule looking for the next batch in Nov? If I order one now, will you ship it when it is ready or do I just need to wait until they become available?

i've got two shops working on the links. i should have some by next week hopefully. If you order, i will ship once the links arrive. Thanks.

dpim · 11-02-2005, 01:52 PM

Any updates???

kevinlongisland · 11-02-2005, 07:54 PM

the links have arrived and I'm working on getting some of the back-orders out. I will most likely use up all of my skids and side plates before i get all back-orders out though. But anyone who ordered over a week ago will most likely have their truck shipped within the next couple days.

dpim · 11-03-2005, 01:19 AM

Alright!!!!!!!!!! guess I'm one of the lucky ones,got an email sayin it's shipping.

kevinlongisland · 11-03-2005, 07:25 AM

yup, yours is going out today! Hope you enjoy it.

BROKEN-1 · 11-03-2005, 03:31 PM

Just got mine in the mail today. The kit looks awsome!!!

The specs:

NN chassis
clod axles:
Thundertech CVD
Alluminum lockers
Lathes
Steering. JR 9000t servos
Novak suped duty XR

2 of them

Narrowed comandos
moab's (xl's on order supposedly next week)
benders adapters
Airtronics v6000 for independent 4ws and digs

When I get the tires and rims I will start a build up thread

Thanks Ross

kevinlongisland · 11-03-2005, 05:13 PM

I'm looking foward to seeing some pics of your rig. Glad you are happy with the chassis and that it got there ok.

chameleon · 11-12-2005, 01:20 PM

i would like to know the best way to mount the receiver and esc in the chassie
with the lowest cg possible i have the stick pack laying in the bottom best solution would serve as a battery hold down and esc/receiver mount any suggestion

kevinlongisland · 11-12-2005, 02:51 PM

Quote:

Originally Posted by chameleon

i would like to know the best way to mount the receiver and esc in the chassie
with the lowest cg possible i have the stick pack laying in the bottom best solution would serve as a battery hold down and esc/receiver mount any suggestion

This is the suggested mounting location:

The esc and rx really don't weigh that much, so there mounting position isn't super critical. But mounting on the axles is about as low as you can go.

11-02-2005, 07:54 PM	#34
kevinlongisland The Wheels Keep Turning Join Date: Jan 2004 Location: Phoenix, Arizona Posts: 2,831	the links have arrived and I'm working on getting some of the back-orders out. I will most likely use up all of my skids and side plates before i get all back-orders out though. But anyone who ordered over a week ago will most likely have their truck shipped within the next couple days. Last edited by kevinlongisland; 11-02-2005 at 08:04 PM.

11-12-2005, 01:20 PM	#39
chameleon Newbie Join Date: Nov 2005 Location: Twin Falls Posts: 8	esc and receiver mounting i would like to know the best way to mount the receiver and esc in the chassie with the lowest cg possible i have the stick pack laying in the bottom best solution would serve as a battery hold down and esc/receiver mount any suggestion

09-13-2005, 07:06 AM	#22
FrankyRizzo I wanna be Dave Join Date: Apr 2005 Location: Vegas Posts: 7,172	Use a stampede tranny. They're lighter then the maxx ones.

09-18-2005, 09:37 PM	#24
pullstarter Pebble Pounder Join Date: Apr 2005 Location: Australia Posts: 153	has anyone got pics of how the bottoms of the shocks mount up on the NN? Can't find any :neutral:

09-18-2005, 10:06 PM	#26
pullstarter Pebble Pounder Join Date: Apr 2005 Location: Australia Posts: 153	awesome! thanks badger just gotta hope and pray that my axles turn up now, dam post office have lost em somewhere

09-25-2005, 10:51 PM	#27
Eagle-Mark Pebble Pounder Join Date: Jan 2005 Location: Idaho Posts: 97	Can I buy just the chassis? No links etc...

09-27-2005, 01:00 PM	#29
wheelhaus Pebble Pounder Join Date: Jul 2005 Location: Denver Posts: 182	I just ordered one today! Now i just need axles, motors, pinions, and wheels/tires. With a standard stick pack, could the links bind on the pack in the shortest wheelbase setting?

10-24-2005, 06:42 PM	#31
Mad Hatter Pebble Pounder Join Date: Oct 2005 Location: The arm pit of the universe Posts: 176	So how is the schedule looking for the next batch in Nov? If I order one now, will you ship it when it is ready or do I just need to wait until they become available?

11-02-2005, 01:52 PM	#33
dpim Newbie Join Date: Sep 2005 Location: CEN-CAL Posts: 40	Any updates???

11-03-2005, 01:19 AM	#35
dpim Newbie Join Date: Sep 2005 Location: CEN-CAL Posts: 40	Alright!!!!!!!!!! guess I'm one of the lucky ones,got an email sayin it's shipping.

11-03-2005, 07:25 AM	#36
kevinlongisland The Wheels Keep Turning Join Date: Jan 2004 Location: Phoenix, Arizona Posts: 2,831	yup, yours is going out today! Hope you enjoy it.

11-03-2005, 03:31 PM	#37
BROKEN-1 Newbie Join Date: Feb 2005 Location: PA Posts: 12	Just got mine in the mail today. The kit looks awsome!!! The specs: NN chassis clod axles: Thundertech CVD Alluminum lockers Lathes Steering. JR 9000t servos Novak suped duty XR 2 of them Narrowed comandos moab's (xl's on order supposedly next week) benders adapters Airtronics v6000 for independent 4ws and digs When I get the tires and rims I will start a build up thread Thanks Ross

Sponsored Links

11-03-2005, 05:13 PM	#38
kevinlongisland The Wheels Keep Turning Join Date: Jan 2004 Location: Phoenix, Arizona Posts: 2,831	I'm looking foward to seeing some pics of your rig. Glad you are happy with the chassis and that it got there ok.

RCCrawler Forums

Thread: NN Clod Chassis - $189.99 Complete