New 2.2 Offset from Mayhem Engineering

[Mayhem Eng.]

New 2.2 Bead Locks from Mayhem Engineering
READY TO SHIP THE WEEK OF 2/11/08
ORDERS BEING ACCEPTED NOW!!!

• $95.00/set + $10.00 shipping with in the USA

mayhem_eng@yahoo.com

A set is any 4 rims, either offset, with any 8 rings, any anodized color combination – your choice (Mix & Match or all the same) hardware included.

Additional rings

• $30.00 / 4 rings
• $45.00 / 8 rings

Engraving $20.00 (within reason) * competition rings only.

Our 2.2 now have two different offsets to choose from in all of our 2.2 styles.

1st Offset - .443 (11.25mm) this is a negative offset, meaning that the bottom of the hex is as close to the hub side as possible. (see diagram) This offset offers a wider track width. (see photos below)

2nd Offset – Our latest design - This offset is .3325 (8.4mm) this is also a negative offset. This offset will bring your wheels closer to the frame, this offers a narrower track width of approximately 10 ¼”. (see photos below)



This is courtsey of EeePee


One thing we forgot to mention was that all orders going forward would come with the traditional rings for the insde of the wheel. So I you place an order you would get any wheel style you want with any 4 rings you want and the 4 traditional inside rings. The reason behind this is to make sure we have no interferance problems....







We offer these offsets in all of our wheel designs:

2.2 Mayhem “Spider Wide” ME-1001-W
2.2 Mayhem “Spider Narrow” ME-1001-N

Shown with the ME - 2002 "Custom" ring


2.2 Mayhem “7 Wide” ME-1002-W
2.2 Mayhem “7 Narrow” ME-1002-N



2.2 Mayhem “Phatty Wide” ME-1003-W
2.2 Mayhem “Phatty Narrow” ME-1003-N




We have two new ring styles for a total of eight.
2.2 Mayhem “Grinder” ME - 2001



2.2 Mayhem “Custom” ME - 2002




2.2 Mayhem “5 Point” ME - 2003


2.2 Mayhem “Competition 8” ME – 2004-8 (can be engraved for an add’l fee)
2.2 Mayhem “Competition 16” ME – 2004-16 (can be engraved for an add’l fee)



2.2 Mayhem “Nuke” ME - 2005


2.2 Mayhem “Nuke Plus” ME - 2006


2.2 Mayhem “Nuke Round” ME - 2007


2.2 Mayhem “Traditional” ME - 2008



We offer five anodize colors plus Machine Finish (aluminum)
Blue, Red, Gold, Violet, Black

NEW OFFSET PHOTOS

THESE PHOTOS SHOW THE AXIAL HEX THAT HAS NOT BEEN MODIFIED





THESE TWO PHOTOS BELOW HAVE THE STOCK AXIAL HEXES MODIFIED, WE REMOVED THE BARREL END OF THE HEX FLUSH TO THE HEX. THIS IS A MODIFICATION WE RECOMMEND IF YOU WANT MAXIMUM HEX WHEEL ENGAGEMENT.

[Rockcrawler]

WOW!


Great job Mayhem.

Guess I will have to order another set of the offset now.

Keep up the good work, good customer service and these guys will support you.

[shrek]

those look great mayhem can't wait to get mine good job.

[1beatjeep]

sences these have and offset like that.Well the tire hit the links now.

[Rckcrwlr]

I cannot wait to get mine...

[Mayhem Eng.]

We tested on stock suspended rig to make sure we cleared everything and we did, nothing rubbed or hit. There is one catch, you have to run a inside ring that will not interfer with any of the steering components...We took a stock axial wheel and measured the offset and placed our offset the same. We provide this ring with all our orders.....


One thing we forgot to mention in the above post was that all orders going forward would come with the traditional rings for the insde of the wheel. So I you place an order you would get any wheel style you want with any 4 rings you want and the 4 traditional inside rings. The reason behind this is to make sure we have no interferance problems....


Thanks Mayhem Eng.

Originally Posted by 1beatjeep

sences these have and offset like that.Well the tire hit the links now.

[Rckcrwlr]

Originally Posted by mayhem

We tested on stock suspended rig to make sure we cleared everything and we did, nothing rubbed or hit. There is one catch, you have to run a inside ring that will not interfer with any of the steering components...We took a stock axial wheel and measured the offset and placed our offset the same. We provide this ring with all our orders.....


One thing we forgot to mention in the above post was that all orders going forward would come with the traditional rings for the insde of the wheel. So I you place an order you would get any wheel style you want with any 4 rings you want and the 4 traditional inside rings. The reason behind this is to make sure we have no interferance problems....


Thanks Mayhem Eng.

Makes sense...

[Mayhem Eng.]

Thank you sir.....

Originally Posted by Rckcrwlr

Makes sense...

[NIK]

pm sent

[Mayhem Eng.]

got it, sent back....

Originally Posted by NIK

pm sent

[shrek]

that will work thanks mayhem.

[Rathgar]

I just wanted to say too anybody thats looking at this thread.That i ordered some rims and changed my mind on a few things and they have been very accomidating.Great customer support before ive even got my rims.

[rcjunky3]

wow many options on rims, rings and colors i know where my next set of beadlocks is coming from. i am in the process of building a truck for my daughter do you happen to have any pics of maybe some violet rings on black wheels and silver wheels thanks

[Mayhem Eng.]

Originally Posted by rcjunky3

wow many options on rims, rings and colors i know where my next set of beadlocks is coming from. i am in the process of building a truck for my daughter do you happen to have any pics of maybe some violet rings on black wheels and silver wheels thanks

Violet glow-plug caddy (color reference)



Mayhem "Spider" ME-1001 Machine Finish



We currently do not have a violet rim/rings in stock. We will be going to the plater next week and expect to ship to customers the week of 2/11. Hope this helps, LMK.

Thanks,
Mayhem Engineering

[rcjunky3]

it helps alot i probably wouldnt be ordering until mid to the end of this month. how is the hole size for the tlt cvds

[iwanttocrawl]

you got pm,i need another set

[Mayhem Eng.]

Got it, Thanks Mayhem Eng.

Originally Posted by iwanttocrawl

you got pm,i need another set

[gone_wheelin]

Does this mean my order will come with the traditional inner rings?

Also, I can't tell from the photos, but is the Axial offset more positive or negative? I plan to run these on TLT and/or Axial axles and want to make sure I get something that will work on both.

Thanks,

[Mayhem Eng.]

Both of our offsets are negative, The axial offset is less negative,( smaller number) narrower track width. Keep in mind the offset comes from to centerline of the wheel. If you expeced all 8 rings to be the same Thats what I will ship. In the furture The traditional rins will be standard for the inside of the wheel to make sure we have no clearance issues. I will also ship you the traditional rings at no extra charge....Thanks Mayhem Eng.

Originally Posted by gone_wheelin

Does this mean my order will come with the traditional inner rings?

Also, I can't tell from the photos, but is the Axial offset more positive or negative? I plan to run these on TLT and/or Axial axles and want to make sure I get something that will work on both.

Thanks,

[iwanttocrawl]

Originally Posted by mayhem

Got it, Thanks Mayhem Eng.

but you did not pm back:-( the answer