RCCrawler Forums

BENDER · 01-27-2006, 11:32 PM

The Cheyenne beadlocks will need to be narrowed for sure, I cut them down to just under 2". The standard Cheyennes will give you more offset, but you'll probably still need to narrow them too.

Here's a link to narrowing 40 Series wheels.
How to narrow 40 series wheels...tutorial

CoreyK · 02-14-2006, 04:55 PM

So with the Moab Xl and XL cheyennes us clod guys still have to narrow them?

BENDER · 02-14-2006, 05:53 PM

Quote:

Originally Posted by CoreyK

So with the Moab Xl and XL cheyennes us clod guys still have to narrow them?

Yes, you will need to narrow the wheels down to about 1 3/4". Otherwise, the tires will rub the links.

CoreyK · 02-14-2006, 06:16 PM

Ok, do you have any clod adapters in stock? if so PM me your paypal.

BENDER · 02-14-2006, 06:22 PM

Quote:

Originally Posted by CoreyK

Ok, do you have any clod adapters in stock? if so PM me your paypal.

I do have them in stock, you can order them on my website www.bendercustoms.com

Thanks.

CoreyK · 02-14-2006, 06:34 PM

You got money!!! Thanks

BENDER · 02-14-2006, 06:47 PM

Quote:

Originally Posted by CoreyK

You got money!!! Thanks

Thanks, I'll get a set in the mail tomorrow for you.

CoreyK · 02-14-2006, 07:15 PM

Thanks! I apreciate it. Can ya help me thought? i want to buy reg moabs and reg commando beadlocks... If i narrow the beadlocks will it make it so i cant use the beadlock function? By the beadlock function i mean just tightening he screws and using no glue to hold the wheels on. IF theres a write up on how to narrow beadlocks can ya gimme a link? I searched and found nothing.

BENDER · 02-14-2006, 07:23 PM

Here's a link to narrowing standard 40 Series wheels, the beadlocks can be narrowed using the same method. They'll still be functional too.
How to narrow 40 series wheels...tutorial

Dutchie · 04-06-2006, 03:15 PM

Those adapters even succesfully found their way to the flat Netherlands, pitty there are to few rocks over here. Bender : Thnx for swift delivery and the windsheildbanner.

Benlatak · 05-15-2006, 02:47 AM

Just to say ..... Thanks you Bender.

I just received my adapters. Nice job.

Now, I will have to wait my wheels. :?

bustedcrawler · 07-20-2006, 07:20 PM

You got PM mang!

BENDER · 07-20-2006, 07:25 PM

Quote:

Originally Posted by bustedcrawler

You got PM mang!

Back at you.

Bam Bam · 10-15-2006, 11:37 AM

Bender, will the narrow beadlocks on moab xL fit on a txt without moding?

BENDER · 10-15-2006, 04:17 PM

Quote:

Originally Posted by Bam Bam

Bender, will the narrow beadlocks on moab xL fit on a txt without moding?

It might, it will be really close. The tires may still rub the links during steering though.

mir4dor · 02-23-2007, 04:59 PM

Kicking this one to subscribe to this thread, I need one of those to adapt the Proline rims/Moab's to my TXT. I hope they will be available soon

Thanks in advance !

BENDER · 02-23-2007, 05:51 PM

Quote:

Originally Posted by mir4dor

Kicking this one to subscribe to this thread, I need one of those to adapt the Proline rims/Moab's to my TXT. I hope they will be available soon

Thanks in advance !

I've got material on order, I hope to have some ready very soon.

BENDER · 04-10-2007, 10:56 AM

Ok guys, I've only got five sets of the 12-23mm adapters left in stock. Once they're gone, they're gone for good. ;)

bi_eep · 04-11-2007, 07:12 AM

Kinda curious. Why will you not be carrying them anymore?

BENDER · 04-11-2007, 07:45 AM

Quote:

Originally Posted by bi_eep

Kinda curious. Why will you not be carrying them anymore?

I've only sold a couple sets over the last 6+ months. Everyone seems to be going with the Axial wheels. Plus, the 2 lathes at the shop are booked solid, so I don't have a way to make caps for the 23mm adapters anymore.

04-10-2007, 10:56 AM	#198
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	Last 5 sets!! Ok guys, I've only got five sets of the 12-23mm adapters left in stock. Once they're gone, they're gone for good. ;)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-27-2006, 11:32 PM	#181
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	The Cheyenne beadlocks will need to be narrowed for sure, I cut them down to just under 2". The standard Cheyennes will give you more offset, but you'll probably still need to narrow them too. Here's a link to narrowing 40 Series wheels. How to narrow 40 series wheels...tutorial

02-14-2006, 04:55 PM	#182
CoreyK Rock Crawler Join Date: May 2005 Location: In front of my comp Posts: 836	So with the Moab Xl and XL cheyennes us clod guys still have to narrow them?

02-14-2006, 06:16 PM	#184
CoreyK Rock Crawler Join Date: May 2005 Location: In front of my comp Posts: 836	Ok, do you have any clod adapters in stock? if so PM me your paypal.

02-14-2006, 06:34 PM	#186
CoreyK Rock Crawler Join Date: May 2005 Location: In front of my comp Posts: 836	You got money!!! Thanks

02-14-2006, 07:15 PM	#188
CoreyK Rock Crawler Join Date: May 2005 Location: In front of my comp Posts: 836	Thanks! I apreciate it. Can ya help me thought? i want to buy reg moabs and reg commando beadlocks... If i narrow the beadlocks will it make it so i cant use the beadlock function? By the beadlock function i mean just tightening he screws and using no glue to hold the wheels on. IF theres a write up on how to narrow beadlocks can ya gimme a link? I searched and found nothing.

02-14-2006, 07:23 PM	#189
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	Here's a link to narrowing standard 40 Series wheels, the beadlocks can be narrowed using the same method. They'll still be functional too. How to narrow 40 series wheels...tutorial

04-06-2006, 03:15 PM	#190
Dutchie Newbie Join Date: Feb 2006 Location: Netherlands Posts: 11	Those adapters even succesfully found their way to the flat Netherlands, pitty there are to few rocks over here. Bender : Thnx for swift delivery and the windsheildbanner.

05-15-2006, 02:47 AM	#191
Benlatak Newbie Join Date: Apr 2006 Location: FRANCE Posts: 22	Just to say ..... Thanks you Bender. I just received my adapters. Nice job. Now, I will have to wait my wheels. :?

07-20-2006, 07:20 PM	#192
bustedcrawler RCC Addict Join Date: Apr 2004 Location: 5280 Posts: 999	You got PM mang!

10-15-2006, 11:37 AM	#194
Bam Bam Rock Crawler Join Date: Aug 2005 Location: White Lake Posts: 764	Bender, will the narrow beadlocks on moab xL fit on a txt without moding?

Sponsored Links

02-23-2007, 04:59 PM	#196
mir4dor Quarry Creeper Join Date: Oct 2006 Location: Amsterdamned Posts: 329	Kicking this one to subscribe to this thread, I need one of those to adapt the Proline rims/Moab's to my TXT. I hope they will be available soon Thanks in advance !

04-11-2007, 07:12 AM	#199
bi_eep Pebble Pounder Join Date: Jul 2004 Location: College Station Posts: 158	Kinda curious. Why will you not be carrying them anymore?

RCCrawler Forums

Thread: BENDER Customs 23mm adapters...........Last 5 sets then they're gone