RCCrawler Forums

Ares17 · 10-06-2005, 07:45 PM

Yo Bender, how much for shipping to Singapore? The adapters looks sweet. Thought of using your adapters with a new set of shoes for my TXT as the big joes and the outback are rubbing the links too much. Let me know yah. Thanx.

BENDER · 10-06-2005, 07:51 PM

Quote:

Originally Posted by Ares17

Yo Bender, how much for shipping to Singapore? The adapters looks sweet. Thought of using your adapters with a new set of shoes for my TXT as the big joes and the outback are rubbing the links too much. Let me know yah. Thanx.

Thanks for the compliment. I'll check on shipping and PM you. I do strongly suggest that you narrow, whatever rims you're going to buy, on the inner bead. Otherwise you may still get some rubbing.

Thanks.

Kev808 · 10-13-2005, 02:28 AM

Bender, I Just recieved the parts. Thanks again

BENDER · 10-13-2005, 03:21 AM

Cool, glad to hear they've arrived.

Thanks again!!

bustedcrawler · 10-18-2005, 10:22 AM

Hey Bender, I could use a set for Clod outters....Wanna Crawl this weekend or grab a brew or two and I bring ya cash?

BENDER · 10-18-2005, 10:44 AM

Quote:

Originally Posted by bustedcrawler

Hey Bender, I could use a set for Clod outters....Wanna Crawl this weekend or grab a brew or two and I bring ya cash?

Sounds good, I'll give ya a call a little later in the week.

bustedcrawler · 10-19-2005, 10:38 AM

Quote:

Originally Posted by BENDER

Sounds good, I'll give ya a call a little later in the week.

Sweet sweet!!

jason · 10-19-2005, 10:56 AM

Quote:

Originally Posted by bustedcrawler

Sweet sweet!!

You can't use Benders products, they don't break, it would be cramping your style.

bustedcrawler · 10-19-2005, 11:48 AM

Quote:

Originally Posted by jason

You can't use Benders products, they don't break, it would be cramping your style.

Yeah and?? I havent broke my Heydco adapters so whats the diff? Besides there are plenty of other parts on the truck for me to break, what does it matter if the a-dapt-ers dont? I wouldnt worry if I were you about me not breaking. Last Saturday when I went out, stripped out 2 servos, broke a rod end on the drag link, and lossened an extender for my Heydco's. I'll still break man.....hell I may even find a way to break these.......

flexychevy · 10-19-2005, 05:53 PM

Do you have to cut the tire down too.

BENDER · 10-19-2005, 08:10 PM

Quote:

Originally Posted by flexychevy

Do you have to cut the tire down too.

No, just narrowing the rims should be all you need to do. The last few sets I did ended up about 2" wide overall and it seems to work great. The Clod version will give a little narrower stance then the TXT version. Clod guys looking for extra width can use TXT outers with my TXT adapters, it'll give you about a 1/2" wider stance.

Cole82 · 10-19-2005, 08:57 PM

http://www.prolineracing.com/proline.html
Make sure to take a look at this page the offset on some rims are different. Example wabash 23mm wheel make a very narrow truck. My clod is 13 inches on 2" rims and narroed 3/8" tires.
Just trying to help
Great product bender thanks for the help.

WTF It didn't link the right page.
Click on a wheel then click wheel guide.

BENDER · 10-19-2005, 08:58 PM

Quote:

Originally Posted by Cole82

http://www.prolineracing.com/proline.html
Make sure to take a look at this page the offset on some rims are different. Example wabash 23mm wheel make a very narrow truck. My clod is 13 inches on 2" rims and narroed 3/8" tires.
Just trying to help
Great product bender thanks for the help.

Good point!!

Blood · 10-24-2005, 10:28 AM

wow loving these

I have some proline 40 series hd bowties... tho for my truggy.... bowties would suck on a clod.... nice idea for the furure tho

Over-Rev · 11-06-2005, 05:03 PM

Thanx Money sent.

BENDER · 11-08-2005, 02:24 PM

I got your order Over-Rev, they're in the mail.

I've just run out of the 23mm Clod adapters, I still have a handfull of the TXT adapters though. I should be able to make more in the next week or two. I'll post up here when they're ready.

Thanks guys!!

CrawlerRon · 11-08-2005, 04:50 PM

Are the TXT adapters wider then the Cold adapters, and will the TXT adapters fit on a Clod?

BENDER · 11-08-2005, 08:58 PM

Quote:

Originally Posted by CrawlerRon

Are the TXT adapters wider then the Cold adapters, and will the TXT adapters fit on a Clod?

Yes, the TXT adapters are wider then the Clods, the TXT version will work on a Clod with TXT outer axles. The Clod and TXT have the same outer knuckles, but the TXT's outer axles are about a 1/4" longer. So with TXT outer axles and the TXT 23mm adapters, on a Clod, you'd get about a 1/2" wider stance then with Clod outers/adapters.

JAKEF150FX4 · 11-17-2005, 06:10 PM

Bummer, i was about to send you paypal for clod adapter till i read it.

I ll wait.. thanks!

Jake

BENDER · 11-17-2005, 10:01 PM

I should have them back in stock by the end of next week.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-06-2005, 07:45 PM	#81
Ares17 Rock Stacker Join Date: Apr 2005 Location: Rock Haven Posts: 62	Yo Bender, how much for shipping to Singapore? The adapters looks sweet. Thought of using your adapters with a new set of shoes for my TXT as the big joes and the outback are rubbing the links too much. Let me know yah. Thanx.

10-13-2005, 02:28 AM	#83
Kev808 Quarry Creeper Join Date: Jun 2005 Location: DH Posts: 406	Bender, I Just recieved the parts. Thanks again

10-13-2005, 03:21 AM	#84
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	Cool, glad to hear they've arrived. Thanks again!!

10-18-2005, 10:22 AM	#85
bustedcrawler RCC Addict Join Date: Apr 2004 Location: 5280 Posts: 999	Hey Bender, I could use a set for Clod outters....Wanna Crawl this weekend or grab a brew or two and I bring ya cash?

10-19-2005, 05:53 PM	#90
flexychevy Pebble Pounder Join Date: Apr 2005 Location: wellington,co Posts: 116	Do you have to cut the tire down too.

10-19-2005, 08:57 PM	#92
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	http://www.prolineracing.com/proline.html Make sure to take a look at this page the offset on some rims are different. Example wabash 23mm wheel make a very narrow truck. My clod is 13 inches on 2" rims and narroed 3/8" tires. Just trying to help Great product bender thanks for the help. WTF It didn't link the right page. Click on a wheel then click wheel guide.

10-24-2005, 10:28 AM	#94
Blood Rock Stacker Join Date: Jun 2005 Location: Scotland Posts: 68	wow loving these I have some proline 40 series hd bowties... tho for my truggy.... bowties would suck on a clod.... nice idea for the furure tho

11-06-2005, 05:03 PM	#95
Over-Rev Pebble Pounder Join Date: Aug 2005 Location: Vallejo Posts: 178	Thanx Money sent.

11-08-2005, 02:24 PM	#96
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	I got your order Over-Rev, they're in the mail. I've just run out of the 23mm Clod adapters, I still have a handfull of the TXT adapters though. I should be able to make more in the next week or two. I'll post up here when they're ready. Thanks guys!!

11-08-2005, 04:50 PM	#97
CrawlerRon Pebble Pounder Join Date: Sep 2005 Location: Columbus Posts: 154	Are the TXT adapters wider then the Cold adapters, and will the TXT adapters fit on a Clod?

Sponsored Links

11-17-2005, 06:10 PM	#99
JAKEF150FX4 Rock Stacker Join Date: Oct 2005 Location: Long Island Posts: 67	Bummer, i was about to send you paypal for clod adapter till i read it. I ll wait.. thanks! Jake

11-17-2005, 10:01 PM	#100
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	I should have them back in stock by the end of next week.

RCCrawler Forums

Thread: BENDER Customs 23mm adapters...........Last 5 sets then they're gone