~TSS~ 2.2 RocKrawler Beadlocks (Berg and Scalers) http://www.freewebs.com/thescaleshop...go%20small.jpg "2.2 RocKrawler Beadlocks" Looking for the Ultimate 2.2 Scaler Beadlock? Sick of your Comp Rig having Blinged Out Wheels? Then TSS has your answer! http://img244.imageshack.us/img244/8011/rk1.jpg http://img131.imageshack.us/img131/4462/rk2.jpg http://img244.imageshack.us/img244/1248/rk3.jpg http://img21.imageshack.us/img21/5793/rk4.jpg Modeled after the popular 1:1 Pro Comp Street Lock Steelies, they are specifically designed for use with Berg axles, and work great as well for scalers. 1" wide, 4.4 oz each including rings and hardware. Berg Offset. Stainless steel 2-56 hardware 5/16" long, no need to worry about striping these, 16 cap screws on the front, 8 on the back. Rings have counter bored holes for included cap screws, and beveled edges front and rear. Extreme holding power, even on RC4WD beads. Wheels, and rings anodized satin black. Width on Berg axles is ~ 9.5" to the outside of the rings with standard 12mm hexs. Overall track width will vary depending on tires you choose. $125 + $10 shipping SALE! Free Shipping! $125 Shipped! http://img166.imageshack.us/img166/5597/rkscale1.jpg http://img166.imageshack.us/img166/2483/rkscale2.jpg http://img21.imageshack.us/img21/3098/rkscale3.jpg http://img244.imageshack.us/img244/1799/rkslash1.jpg http://img21.imageshack.us/img21/4687/rkcc2.jpg http://img244.imageshack.us/img244/3681/rkcc3.jpg |
never cease to amaze me with ure beadlocks. if i had a 2.2 i would deffinatly get a set. maybe ill try a set on My AE SC-10 when it comes out. also cant wait for u to come out with a new 1.9 beadlock :) gonna need some when my prodject is done. |
Those are Sick... I'll be getting a set soon... These match my 1:1's to the "T"....:) |
Sick looking wheels"thumbsup" |
has anyone tried these wheels on a berg axle with ckrc high clearance knuckles? Got any pics of the on berg axles at all? P.S. AWESOME LOOKIN WHEELS!!! "thumbsup" |
these wheels have probly the largest inner diameter of any 2.2 wheel youve got, at 1.9" ID. and the rings are thinner than just about anybodys, so you should have no problem. however no pics sorry, and thanks! |
I've seen these wheels, they are high quality and look really good. They will make any rig stand out from the rest."thumbsup" |
Well, I got my new wheels from Cory and as usual they look amazing. The Rovers mounted super easy and the fit is exactly what I was looking for. I run The ckrc high clearance knuckles and these wheels fit very nicely with them. They put my total track width at 10.5" (tire edge to tire edge w/ rovers) with a 1.5mm spacer in front of each hex. I run hpi hexes and they are thinner than most, so they will work awesome with standard hexes. Thanks Cory!!! I'm loving the "Anti-Bling" look...something had to offset this paint job!!LOL The Scale Shop (TSS) new Berg/Scale offset Aluminum Beadlocks... "thumbsup" http://i284.photobucket.com/albums/l...T/IMG_4156.jpg http://i284.photobucket.com/albums/l...T/IMG_4164.jpg http://i284.photobucket.com/albums/l...T/IMG_4159.jpg http://i284.photobucket.com/albums/l...T/IMG_4162.jpg |
Got mine all mounted up today but not on the truck yet unfortunately...still waiting for some parts. These will be finding a home on my mini-clod build. I used the Rovers also, and CRWLER1 mem foams. These wheels are nice and narrow and pair nicely with the narrow foams. Once all together, it made for a tall narrow tire that should net just the right amount of contact patch once the weight of the rig is on them. The Rovers went on easily too...almost fell into place in the groove "thumbsup" Nice set of wheels for sure. I'll be holding on to these for a while 8) http://smg.photobucket.com/albums/v1...h_IMG_4912.jpg |
Looks awesome! Now you need to make a batch of these in 1.9! "thumbsup" |
Will these fit Wheely king axles? How much more off-set is there against a "standard" axial offset rim? I think I found my new Gremlin Wheels... |
Pls tell me that this will be come in 1.9 ??? need a set of 1.9 :shock::-P |
Quote:
|
Quote:
not sure of the exact offset and width of a stock axial wheel but these should narrow your overall track width from the axial wheels at least 1" i would say"thumbsup" |
congrats to Jim for his 6th place finish at ECC09 with these wheels! :shock: well done! |
pic sent to me by offroader"thumbsup" killer combo:shock: http://img.photobucket.com/albums/v1...f/IMG_5344.jpg |
Yeah...thats sexy!! "thumbsup" took these not to long ago :) http://i284.photobucket.com/albums/l...T/IMG_4467.jpg http://i284.photobucket.com/albums/l...T/IMG_4477.jpg |
Good looking wheels, I like that style"thumbsup" |
All times are GMT -6. The time now is 03:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com