Wheel Works 1911 beadlock wheels NEW 1911 series beadlocks All wheels and rings are cut from 6061 along with 80 stainless 3mm button heads. 10 bolts per ring ensures you won't loose a bead. I've been running these allot lately and have run countless packs through running only 4 bolts per ring and have yet to loose a bead. I wanted an extra beefy hex area since I've seen a couple guys break the hexes in some aluminum wheels. There should be enough room to cut a 14mm hex in these and still have enough material for a strong hex area. If guys would like a 14mm hex cut in their wheels,we can do that. Just PM me and we'll work out the details. We will have an offset that puts an Axial at 10.125" overall We will also have an offset that puts a Berg right at 10.375" overall. http://img.photobucket.com/albums/v7...57/wheel10.jpg http://img.photobucket.com/albums/v7...n57/wheel9.jpg We are cutting the Berg offset right now. I'll have 9 sets of Berg offset wheels ready to ship tomorrow afternoon. After we run the Berg offset,we'll be making 15 sets of the Axial offset. Here's a few pictures mounted up on my Berg..... http://img.photobucket.com/albums/v7...n57/wheel6.jpg http://img.photobucket.com/albums/v7...7/IMG_1770.jpg http://img.photobucket.com/albums/v7...7/IMG_1771.jpg http://img.photobucket.com/albums/v7...7/IMG_1773.jpg http://img.photobucket.com/albums/v7...7/IMG_1776.jpg http://img.photobucket.com/albums/v7...57/wheels3.jpg Total cost for wheels,rings and all hardware is $125 shipped anywhere in the U.S.A. If guys want to buy 2 sets or more,PM me. I'll offer a discount for a package deal. Thanks for looking. |
very nice looking wheels. How hard would it be to machine a hex on both sides so you could have a dual offset wheel? |
Very nice man!!! I can't wait to get my set!! |
Damn those are sexy! |
Quote:
Quote:
Quote:
|
Very nice looking wheels! I'll have to hit you up here before to long for a set. |
I need a set with 14mm hex for my TF axles. I think berg offset would work and still clear the knuckles. Can you make em to clear the 8mm stub and hub carrier? I gotta get my Wreckluse project done, and all I really need is some 14mm hex rims! |
Nice Steve "thumbsup""thumbsup" I can't wait to see these in person...Guess I know what my berg and axial will be sporting for wheels 8)8) |
Nice wheels! |
Quote:
Quote:
Quote:
Oh,just one thing I forgot,a wheel,new Cougar,stock 400 foam and all hardware tip the scale at 8.7 ounces. |
sexy wheel;-) |
Quote:
Sent 2 Berg offset and 1 Axial offset out this morning. Thanks guys.8) I have 7 more sets of Axial offset to cut. My last set Monday,will be a custom set for Mr. John Holmes. He's going to get a 14mm hex cut in his for a scale Wreckluse running narrowed Twin Force axles."thumbsup" Some of the local guys,if they'd rather go pick them up in person,these wheels will be available at Brians Hobbyland. I'll also have a couple sets of each offset at our comp on the 30th if anyone needs a set."thumbsup" |
wheels Guys, you really need to look at these wheels. I got them in today from ups and I had the wheels sold in 15 minutes after they got to me."thumbsup" |
Just woundering about getting some black ones in berg offset, if it is possible. |
Quote:
We haven't really planned on offering that,but if there's enough interest,we can offer a few different colors. I'll try to check Monday when I go back to work. "thumbsup" |
Sounds good thanks"thumbsup" |
Quote:
As of right now,we have 3 different finishes available in either an Axial offset or a Berg offset. Either a raw machined finish,polished for the guys that like to add some BLING or a satin finish. Here is a few pictures of a polished wheel.... http://img.photobucket.com/albums/v7...7/IMG_1793.jpg http://img.photobucket.com/albums/v7...7/IMG_1794.jpg http://img.photobucket.com/albums/v7...7/IMG_1795.jpg Here is a few of the satin finish. These are also a custom set we did for John Holmes. He is building a scale Wreckluse running Twin Force axles. Needing a 14mm hex,we opened the hex up and opened up the OD of the counter bore on the face for a bigger wheel nut. http://img.photobucket.com/albums/v7...7/IMG_1796.jpg http://img.photobucket.com/albums/v7...7/IMG_1797.jpg http://img.photobucket.com/albums/v7...7/IMG_1798.jpg Here's a few action shots of a polished set I installed on my sons Axial. Overall width is right at 10.125" outside of tire. This could vary some depending on foam set up. Skinny and tall foams will get you a little skinnier,short wide foams will pooch the sidewalls out a little more gaining a little width. http://img.photobucket.com/albums/v7...7/IMG_1799.jpg http://img.photobucket.com/albums/v7...7/IMG_1800.jpg http://img.photobucket.com/albums/v7...7/IMG_1802.jpg http://img.photobucket.com/albums/v7...7/IMG_1803.jpg |
:shock::shock: Those look sharp on Eddies rig "thumbsup""thumbsup" I will get a set of the polished axials this week 8) |
Thanks Stacey,does look kinda sexy doesn't it.. The BLING is kinda growing on me now,may need to make me another set to polish up for my Berg.:lol: You guys can probably tell the rings themselves are just sanded smooth to remove any flaws,still kindly a light satin finish. I figured the rings get beat up pretty bad anyway,so I thought I'd leave mine satin. However,I can polish the rings as well if some would like that. |
Yeah, those polished ones are sweet."thumbsup" |
All times are GMT -6. The time now is 02:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com