Motoworx Racing 2.2 Rock Crawling RC Wheels

[motoworx]

Originally Posted by Locked Up

Jake,
What is the radius on the cutout for your hubs around the hardware?

I actually will have some newer tools coming out and hopefully they will work with your wheels/caps.

The diameter is about .150 There is just a little extra space around the head of a 2mm socket head screw
thanks
Jake

[Locked Up]

Dang.
Tools are coming in about .173" so maybe a little tight.

Is that hub angled in towards the center at all or are they straight up in that spot?

[bikeboy]

just got the motorworx 2.2 8 spokes wheels SL version

i have a wraith with VP knuckles, chubs and lockouts.
What size do I need to get for the SLW hub
SLW WHEEL HUBS

thanks

[BigSid00]

What kind of hubs fit these wheels and do you sell them

[motoworx]

Originally Posted by BigSid00

What kind of hubs fit these wheels and do you sell them

My LE style of wheels don't require any hubs, the hex is machined in the back.
My SLW style wheels need vanquish products slw hubs which I do not sell.

[MAVERICKJK]

Waiting for these (or 10-hole mods) in a 3.8" to mount the RC4WD Mud-SLingers

http://store.rc4wd.com/Mud-Slingers-Monster-Size-40-Series-38-Tires_p_752.html

Specifications:

• Outer Diameter: 7.55" (192mm)
• Width: 3.5" (89mm)
• Inner Diameter: 3.8" (96.52mm)
• Tire thread depth: .31" (8mm)
• Advanced X4 Medium Compound
  
• Each tire weight: 16 oz / 453 g

Of course, going from 2.2 out to 3.8 I would expect more studs for the beadlock ring maintaining similar spacing of the 2.2.

Originally Posted by NorCal 2500HD

Got my wheels last week and finally got them mounted up on my wraith project earlier. These things are very nice, and like others have mentioned, super fast shipping. Everything was packaged up really nice too..

With the black center caps.
Attachment 232538

Scale center caps
Attachment 232539

Attachment 232540

Attachment 232541

Attachment 232542

[TeamBosing]

I recently ordered a set of 2.2 LE 10 Hole, Black on Raw Wheel. Upon further inspection, one wheel has severe tooling marks on the surface. If I pay a good amount of $$$ for the wheels, then I expect them to be flawless. I have no clue how this can pass your quality control???

I hope my camera picks up the imperfections... It looks a lot worse in person!



The wheels are nice... but the tooling marks are unacceptable!

[motoworx]

Customer contacted me through email and showed me the picture and I sent him a new wheel out asap. I fail to see his reasoning to post that up here on a forum but whatever.
I made and sold over $15,000 of RC wheels and related accessories 4th quarter 2013. While mistakes are rare they do happen.
Thanks to all for your business.
Jake@motoworxracing.com

[Wraithwrocker]

I have my rims now they get are just awsome. I love it, greetings from Germany

[TeamBosing]

Originally Posted by motoworx

Customer contacted me through email and showed me the picture and I sent him a new wheel out asap. I fail to see his reasoning to post that up here on a forum but whatever.
I made and sold over $15,000 of RC wheels and related accessories 4th quarter 2013. While mistakes are rare they do happen.
Thanks to all for your business.
Jake@motoworxracing.com

You are absolutely correct. Mistakes do happen...
Issue has been taken care of. Vendor stands behind their products. Awesome customer service! Will definitly purchase again. Thanks Jake!

[MAVERICKJK]

Originally Posted by motoworx

Customer contacted me through email and showed me the picture and I sent him a new wheel out asap. I fail to see his reasoning to post that up here on a forum but whatever.
I made and sold over $15,000 of RC wheels and related accessories 4th quarter 2013. While mistakes are rare they do happen.
Thanks to all for your business.
Jake@motoworxracing.com

If posted after resolution, I agree, but QC is very important. That said, you do have some great wheels!

[Sp3cia1-K]

I got a set of your 2.2 raw 8 spokes and just seen that you now offer blue rings, any chance showing what they look like paired up?

[motoworx]

Originally Posted by Sp3cia1-K

I got a set of your 2.2 raw 8 spokes and just seen that you now offer blue rings, any chance showing what they look like paired up?

Not the same wheel you have but its got the color combo. I will try to get some pictures of that for you this weekend.
Thanks

[Sp3cia1-K]

Originally Posted by motoworx

Not the same wheel you have but its got the color combo. I will try to get some pictures of that for you this weekend.
Thanks

Thanks, I look forward to seeing it

And the beadlock ring is tapped to m2.5 right? So rc4wd scale bolts should work fine with the wheels?

[Ohioskills]

them boys are down right sick

[motoworx]

Originally Posted by Sp3cia1-K

Thanks, I look forward to seeing it

And the beadlock ring is tapped to m2.5 right? So rc4wd scale bolts should work fine with the wheels?

Yes, the 2.2's are tapped to 2.5mm

[m0nster]

I emailed but got no response. will the new 20 hole beadlock rings fit your older 10 screw wheels?

[J_Fitz]

Wondering when the 2.2 HD razors in black will be back in stock.

Thanks in advance

[motoworx]

Originally Posted by J_Fitz

Wondering when the 2.2 HD razors in black will be back in stock.

Thanks in advance

They are available now.