RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Vendors Tires and wheels (http://www.rccrawler.com/forum/vendors-tires-wheels/)
-   -   Presenting Shifts, Lightweight n' Flexible Offset Hubs (http://www.rccrawler.com/forum/vendors-tires-wheels/436464-presenting-shifts-lightweight-n-flexible-offset-hubs.html)

wrenchinrock 06-28-2013 01:27 AM

B...E...A...U...tiful send me a set! :thumbup:

dezmoon 07-05-2013 10:28 AM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
While Out at N.E.N.Q a few Weeks back I Had the Pleasure of Meeting BC Brian,,He Is Responsible for the "Shift" Lightweight Wheel Hubs,,after Shooting The Shit with Him For Some Time I Came to Realize His Hubs Would Work Awesome With The 8-Bolt Wheels,, One of the Things That Came to Mind First Was Price,,Less Money than The VP SLW Hubs and WAAAAAAAAAAAYYYYY For Flexable for The Money,,For Less Than What It Would Cost For a Single Set of VP Hubs You Get Way More Offset Choices in 1 Bag,,So I Decided To Get a Set And Try Em Out,,,

Finally Had some Not So Free,,Free Time To Get These Little Gems Mounted Up On My Murdered Out 8-Bolts,,Included in The Pics are The Shift Hubs,With a VP Hub,,a Shot of The Multiple Spacers and The Mounting Process From Start to Finish,,

I Am Totally Happy With The Shift Hubs, And Pleased To Say That They are A Great Option For The Pit Bull 8-Bolts,, Enough With Jaw ,,Onto the Pics,, Thanks Again Brian,,

http://i212.photobucket.com/albums/c...psf9c2a545.jpg[/URL]
http://i212.photobucket.com/albums/c...psb7f57f65.jpg[/URL]

BC-Brian 07-06-2013 09:46 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Thanks Dez!

I am glad that you like the hubs and that they are working well on the Pit Bull 8 bolt wheels.

BC-Brian 07-08-2013 03:57 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Some more Orange Anodized Shift Hubs, with two drilled to 6mm for WrenchinRock

https://lh5.googleusercontent.com/-a...o/DSC_3385.JPG

You should have em' soon.

wrenchinrock 07-10-2013 11:55 PM

SAWEET cant wait man! !!!! thanks again will be ordering more soon! :thumbup:

Constant Threat 07-12-2013 07:17 PM

Do these work with regular 300's?

winnerone23 07-12-2013 07:29 PM

Drill em out, they will.. I drilled my rears on my XR for ti axles.. nice snug fit.

wrenchinrock 07-12-2013 07:37 PM

if u need em drilled he will drill for 6mm for u look at the above pics of my hubs he drilled 2 for my rear 6mm hulkstas:thumbup::D

BC-Brian 07-12-2013 10:41 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Quote:

Originally Posted by Constant Threat (Post 4396388)
Do these work with regular 300's?

I will drill them to any size you like, included in the price. "thumbsup"

Grimreeper 07-14-2013 06:36 AM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Quote:

Originally Posted by BC-Brian (Post 4346819)
Thanks Grim,

That's aweSome, I am glad you liked them. Can't wait to see pictures.

Finally found my camera. These things look much nicer in person than in the pics. Trying to decide which color to get for my next batch.

http://farm4.staticflickr.com/3756/9...a51a008a_b.jpg
june28 741 by johnnycroft83, on Flickr

wrenchinrock 07-16-2013 06:23 PM

just got my shifts in they look sweet! will be mounting them up on some slw's for mock up of my double agent i will send pic's thanks again man:thumbup::thumbup::D

Al3eRtO 07-17-2013 05:43 AM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
:) wow!

BC-Brian 07-22-2013 03:25 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Slim Shifts 2.0 are in stock for a limited time. I received 10 sets from the machinist today and will get some more made up if you guys kick and scream for them "thumbsup"

Rev 2 has a small raised landing for the wheel nut. Some axles were not threaded far enough for the originals slims to work properly without requiring a spacer behind the wheel nut. These still have a .225" offset and should with all axles.

Some photos of the new design.

https://lh3.googleusercontent.com/-W...718_233220.jpg

Drop a PM to get in on this batch, a set of 4 with hub spacers is $40. Stock inside diameter is for a 4mm shaft.

winnerone23 07-22-2013 03:40 PM

Nice Brian! You sure do know how to get a guy to spend his money.. :thumbup::cool:

I had issue with the VP vvd's needing a spacer with the OG shift hubs. I'll have to decide if the spacer/washer I'm using warrants a 4th set of hubs.. ;)

Hittman 07-22-2013 04:05 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Awesome revision to the slims. I still run my og set if slims, yes I run a spacer but I haven't had any problems. I love all 4 of my sets, and I would reccomend them to anyone"thumbsup"

BC-Brian 07-22-2013 04:14 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Quote:

Originally Posted by Hittman (Post 4408924)
Awesome revision to the slims. I still run my og set if slims, yes I run a spacer but I haven't had any problems. I love all 4 of my sets, and I would reccomend them to anyone"thumbsup"

Thanks Man! Glad you still like em.

Quote:

Originally Posted by winnerone23
Nice Brian! You sure do know how to get a guy to spend his money.. :thumbup::cool:

I had issue with the VP vvd's needing a spacer with the OG shift hubs. I'll have to decide if the spacer/washer I'm using warrants a 4th set of hubs.. ;)

You know it does "thumbsup" ;-)

BC-Brian 07-25-2013 09:19 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Some Blue hubs for Fly Krisco
https://lh5.googleusercontent.com/-j...lue_hubs_1.JPG

And Black Ones for Scrounge
https://lh6.googleusercontent.com/-2...ack_hubs_2.JPG

Fly Krisco 07-26-2013 09:18 AM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Very nice. I can't wait to get them.

wrenchinrock 07-28-2013 04:23 AM

finally got.my double agent runnin an my shifts mounted up i tapped the extra holes for m3 its official i no longer have any vp hubs!!! lovin the shifts man

T3rry 08-07-2013 08:11 PM

Re: Presenting Shifts, Lightweight n' Flexible Offset Hubs
 
Got my New New Slims, and they're HAWT, perfect tolerances for fitting over and in my Vanquish knuckle weights.

https://dl.dropboxusercontent.com/u/...2019.35.00.jpg
https://dl.dropboxusercontent.com/u/...2019.36.11.jpg
https://dl.dropboxusercontent.com/u/...2019.36.17.jpg


All times are GMT -6. The time now is 06:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com