04-02-2009, 12:00 AM | #221 |
Rock Stacker Join Date: Mar 2009 Location: SGV, LA, CA, US
Posts: 66
|
Got mine and put it together, went together with out a hitch. Love the thing! Great product Chris... Jonathan... |
Sponsored Links | |
04-07-2009, 11:20 AM | #222 |
Pebble Pounder Join Date: Dec 2007 Location: Northwest
Posts: 181
| Creeper Skid Plate
Thanks Jonathan! Here are some shots of the new skid plate installed on the test rig that will be available seperately and standard equipment on the Creeper. Chris Last edited by CRAWLINGAROUND; 04-07-2009 at 11:23 AM. |
04-07-2009, 01:59 PM | #223 |
Rock Stacker Join Date: Mar 2009 Location: SGV, LA, CA, US
Posts: 66
|
Chris, The gearbox/tranny said to grease it... Do I need to fill it up compeltely with an extremely thick silicone oil or do I just use a thick silicone grease coated completely on the gears? Also book says to experiment with different viscosities of grease in the diffs to basically simulate an LSD in a sense... what do you recommend to allow minimal slippage but not fully locked? Thanks, Jon P.S. When is the new skid plate going to be available?? Also I sent an email to customer service about a part for the creeper. |
04-07-2009, 06:06 PM | #224 |
Quarry Creeper Join Date: Feb 2009 Location: In The BackYard Crawlin
Posts: 278
|
chris,when is it going to be available?
|
04-07-2009, 08:54 PM | #225 |
Newbie Join Date: Mar 2009 Location: Dickson
Posts: 37
|
I just noticed a short VCD on mine is broken where it pivots. :-( Besides that it has been a very fun truck.
|
04-07-2009, 09:31 PM | #226 |
Pebble Pounder Join Date: Mar 2005 Location: Nebraska
Posts: 107
| |
04-07-2009, 09:58 PM | #227 |
Quarry Creeper Join Date: Dec 2008 Location: Post Falls, ID
Posts: 337
|
yeah, so thats cool! Venom is making some nice upgrades for this rig and I can't wait to see what else is to come this summer and beyond. |
04-08-2009, 12:23 AM | #228 |
Rock Stacker Join Date: Aug 2005 Location: Wintersville
Posts: 56
|
soooooooo,.........whens the skid plate gonna be available?
|
04-08-2009, 01:11 AM | #229 |
Quarry Creeper Join Date: Feb 2009 Location: Tucson, AZ
Posts: 453
|
I will definately be purchasing that skid!
|
04-08-2009, 02:49 AM | #230 |
Newbie Join Date: Mar 2009 Location: McMinnnville
Posts: 1
|
chris nice pic but your test creeper has no dig.
|
04-08-2009, 12:02 PM | #231 |
Pebble Pounder Join Date: Nov 2007 Location: Houston
Posts: 135
|
We need dates!!! :P When are we going to be able to see these available? |
04-08-2009, 05:16 PM | #232 |
Pebble Pounder Join Date: Dec 2007 Location: Northwest
Posts: 181
|
The skid plate should be here in the next shipment of the parts and kits coming this month. I cant be specific as I'm not positive right now. The part number for the skid plate is the same as the original 2 pc design VEN 8348. The new part will replace the old part in production. I have another test Creeper that has the Dig Unit installed This silver version was the first test bed and has many hours driving on it since last summer and through the winter in all conditions and temps. @wnagangkid Just coat the gears in the tranny with a regular grease or the Red grease included in the kit. The diff grease I suggest is a high tack anti fling type like marine grease or similar. Just pack it in the case and let it ooz out and then assemble the diff and spin it to push out the excess. It will be tough to turn by hand but with a wheel it will be easier. It will break in and be smooth. Chris |
04-09-2009, 08:14 AM | #233 |
Quarry Creeper Join Date: Nov 2008 Location: Slovakia
Posts: 308
|
Thank you for updated VEN-8300 Venom Creeper Instruction V2.pdf that comes in vector format, old one V2 was hard to read :(
|
04-09-2009, 10:32 AM | #234 |
Newbie Join Date: Mar 2009 Location: Dickson
Posts: 37
|
How do we get replacements for the defective axles? Mine broke and I have only driven it probably 30 min. total.
|
04-09-2009, 10:42 AM | #235 |
Pebble Pounder Join Date: Dec 2007 Location: Northwest
Posts: 181
| |
04-09-2009, 11:00 AM | #236 |
Newbie Join Date: Mar 2009 Location: Dickson
Posts: 37
|
Okay thanks, I sent you a PM. |
04-11-2009, 08:38 AM | #237 |
Quarry Creeper Join Date: Nov 2008 Location: Slovakia
Posts: 308
|
what about wide range of pinion and spur gears? I'd try smaller pinion, but don't know for sure what to buy. Thank you |
04-11-2009, 09:29 AM | #238 |
Newbie Join Date: Mar 2009 Location: Dickson
Posts: 37
|
I do know the pinions off a Mini Titan helicopter will fit since I tried one on mine. I am not sure what modulus they are though.
|
04-12-2009, 09:14 AM | #239 |
Newbie Join Date: Mar 2009 Location: Manchester
Posts: 32
|
So, is Venom planning on supplying a skid plate to those of us that have purchased the Creeper prior to the skid plate being included? And if not, is it just a kick in the balls to the guys that have shown the supplier the need for one and have guinea pigged the rig for the R&D department? I love my creeper. The skid is the main hang up I have seen with it. I kinda of BS to now have to purchase a skid that should have A, been included with it from the begining and B having to pay for something you now include for free. |
04-12-2009, 10:05 AM | #240 |
Newbie Join Date: Apr 2009 Location: central CT
Posts: 1
|
I just finished my creeper. went together well but I had one problem. One of the axle shafts did not have the small hole in it for small rod that keeps the hub from spinning. I did not want to wait for a new peice so I drilled a hole in it fo finish the assembly. Im kinda worried about it breaking down the road.
|
| |