creeper Qustion
 

can u build a monster truck from a creeper or is the gearing to low to make it fast with a brushless.I would like to make a monster truck out of it.Is it a good platform to start with any help would be great thank you

It is geared very slow - I think my top speed with FiftyFive is just above normal walking speed...8km/h or so
(I can measure with GPS tomorrow)

I haven't tried it on my creeper, but on my WK tuber, with the 850 kv outrunner it is much slower than my creeper, but by switching only the motor to a 4600 kv and keeping everything else identical the truck will do a standing backflip on grass and launch over most jumps in an out of control manner. I would guess with a hot enough motor it would work, if you are going for semi-scale monster jam performance.

I was looking at the groundpounder but i have a brushlesds and radio and the creeper is only 145.00 dollars

you could do it, but you will have a hell of a torque twist to deal with. best bet is if you get a creeper, get some 80 to 90 wt shock oil and stiff springs, either traxxas reds off of t-e maxx or axial firms.

Why not just buy an hpi wheely king?

I did this once. 4800kv torque twist like a mofo and stupid fast.

take a look at the tamiya txt perfect for a scale mt