lipo and novak rooster combo i recently acquired a couple of 2s lipo 1800mah 20c .... i was wondering if anyone has experience any problems running lipo in their rooster esc motor combo... any advice tips... im not experience with lipo so its new to me"thumbsup""thumbsup""thumbsup" thanks in advance |
I've ran 2s 1600 mah lipo with Rooster/55t and 14t pinion with no problems ....almost 2 hours of runtime too "thumbsup" |
Check the instruction sheet that came with the novak rooster. It has two modes, one for Nicad / Nimh and a second mode for Lipo. In Lipo mode there is a low voltage cut off. |
no problems here |
I've been running 3S 2200mAH with an external BEC without issue. Works very well. |
nice thats what id like to hear..... conversion will done by tomorrow.... woot woot thanks again for the info.... 07crawler... havasu was off the hook springbreak this year.... |
Quote:
Do you have a copy of the instructions, i dont have mine and cant seem to find a copy of it on the internet! thanks |
the instructions are at teamnovak.com but make sure you have the lipo cutoff turned on cause they cant drop below 6v trust me i know lol ruined 2 lipos the hard way lol:lmao: |
Quote:
http://www.teamnovak.com/download/in...ons/index.html Mid way down the page look for the name of the ESC :roll: http://www.teamnovak.com/download/in...r_crawler2.pdf |
Re: lipo and novak rooster combo Is there any difference if I have two motors and one Novak Rooster esc ? Do I have to have two lipo batteries if I have two motors? |
Re: lipo and novak rooster combo Quote:
|
Re: lipo and novak rooster combo i run a rooster crawler on 3s with 4ws(two hitec 5645's) with no external bec , it has never cut out either. Dont ask me how, but it works! |
All times are GMT -6. The time now is 06:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com