RCCrawler Forums

winnerone23 · 06-23-2012, 11:03 PM

Mini isn't bad, I went with full sized, hitec 645mg... Set it up like Thomas did, I did it off his pics.. (pg 102, I believe... On the creeper wagon). Now that's valuable info considering it took me over an hour to hunt down cause my, search, wasn't working... Lots of pages to check... It was easy enough an haven had any worries with it since.. other then a drive shaft popping off the yoke from too much bind an torque... So I went with the 3 position an did free wheel an rear wheel locked out.. its been working great! An the time I ran it today with the new shafts I got, which I only put on the front, works like a moa! No worry of popping a shaft anymore!

I still didn't check on that xvd... I got carpet for my basement, for a new work area today.. busy busy, lots to move..

28offroader · 06-25-2012, 03:03 AM

Even with the search working it's a pia.
I have a spare standard servo so I'll probly throw that in and test out the dig. If I like it I'll go to a smaller servo later. Less weight up top is always mo betta!
That is if I keep the creeper..., been really eyeing an XR-10 lately....and I'm just not big enough into crawling to have multiple rigs. Almost bought one a couple weeks ago but figured I'll wait till I try the creeper out with dig before deciding on a jump to moa.

winnerone23 · 06-25-2012, 05:49 AM

Yeah, its pretty simple, two servo mounts an the servo bolts right up, never really thought bout the weight, but I haven't noticed any diff in the way she acts.. its ten times better with the dig installed! Once you figure out how it all works an the things you can do with dig in as compared to before without it.. you don't notice anything draw backs or weight gain

28offroader · 06-12-2013, 12:24 AM

Man it's been a long time since I've posted in this thread....
Still hav'nt installed the dig....,lol
I did install some MIP driveshafts ( wayyy better than the 3racing), ran it a few times and then put it away....work has been getting in the way of all of the fun stuff!

What's the haps with the Creeper now?
Does'nt look like much is going on with it. Hav'nt seen anything new.
Maybe it's time to let this go?

28offroader · 04-06-2018, 01:53 PM

5yrs later..., & Dig is installed! Lol. Any OG Creeper owners still around?

28offroader · 06-26-2018, 12:11 PM

Time to let this go. I've posted it up in the F/S section if anybody is interested.

06-23-2012, 11:03 PM	#181
winnerone23 I wanna be Dave Join Date: Jan 2012 Location: williamsport Posts: 8,649	Re: 28's Creeper Mini isn't bad, I went with full sized, hitec 645mg... Set it up like Thomas did, I did it off his pics.. (pg 102, I believe... On the creeper wagon). Now that's valuable info considering it took me over an hour to hunt down cause my, search, wasn't working... Lots of pages to check... It was easy enough an haven had any worries with it since.. other then a drive shaft popping off the yoke from too much bind an torque... So I went with the 3 position an did free wheel an rear wheel locked out.. its been working great! An the time I ran it today with the new shafts I got, which I only put on the front, works like a moa! No worry of popping a shaft anymore! I still didn't check on that xvd... I got carpet for my basement, for a new work area today.. busy busy, lots to move..

06-25-2012, 05:49 AM	#183
winnerone23 I wanna be Dave Join Date: Jan 2012 Location: williamsport Posts: 8,649	Re: 28's Creeper Yeah, its pretty simple, two servo mounts an the servo bolts right up, never really thought bout the weight, but I haven't noticed any diff in the way she acts.. its ten times better with the dig installed! Once you figure out how it all works an the things you can do with dig in as compared to before without it.. you don't notice anything draw backs or weight gain

04-06-2018, 01:53 PM	#185
28offroader Quarry Creeper Join Date: Jan 2011 Location: murrieta Posts: 280	Re: 28's Creeper 5yrs later..., & Dig is installed! Lol. Any OG Creeper owners still around?

06-26-2018, 12:11 PM	#186
28offroader Quarry Creeper Join Date: Jan 2011 Location: murrieta Posts: 280	Re: 28's Creeper Time to let this go. I've posted it up in the F/S section if anybody is interested.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-2012, 03:03 AM	#182
28offroader Quarry Creeper Join Date: Jan 2011 Location: murrieta Posts: 280	Even with the search working it's a pia. I have a spare standard servo so I'll probly throw that in and test out the dig. If I like it I'll go to a smaller servo later. Less weight up top is always mo betta! That is if I keep the creeper..., been really eyeing an XR-10 lately....and I'm just not big enough into crawling to have multiple rigs. Almost bought one a couple weeks ago but figured I'll wait till I try the creeper out with dig before deciding on a jump to moa.

06-12-2013, 12:24 AM	#184
28offroader Quarry Creeper Join Date: Jan 2011 Location: murrieta Posts: 280	Man it's been a long time since I've posted in this thread.... Still hav'nt installed the dig....,lol I did install some MIP driveshafts ( wayyy better than the 3racing), ran it a few times and then put it away....work has been getting in the way of all of the fun stuff! What's the haps with the Creeper now? Does'nt look like much is going on with it. Hav'nt seen anything new. Maybe it's time to let this go?

Sponsored Links

RCCrawler Forums

Thread: 28's Creeper