|
| LinkBack | Thread Tools | Display Modes |
07-16-2011, 08:08 PM | #1 |
Rock Stacker Join Date: May 2011 Location: Fresno
Posts: 76
| Losi CC 4ws, crab and Dig using a GT3B
He is a little video of my LCC with 4ws, Crab, and Dig using a hacked GT3b radio. Link http://www.youtube.com/watch?v=NMCDxS-JJdk embeded Last edited by vette66_00; 07-16-2011 at 10:13 PM. |
Sponsored Links | |
07-16-2011, 11:39 PM | #2 |
RCC Addict Join Date: Mar 2007 Location: Turn the mayflower around.. it will never work
Posts: 1,588
|
how did you set up your steering?? I read it in the hack thread but want to know what ya set up in all of it to accomplish that (just the steering).
Last edited by JokersWild; 07-16-2011 at 11:44 PM. |
07-17-2011, 02:14 AM | #3 |
Rock Stacker Join Date: May 2011 Location: Fresno
Posts: 76
|
sub menu EPOINT (4) to channel 4, 0%, NOC sub menu rev 3 4WS, NOL, 100%, NOR, NOO sub menu rev C 4WS, SWI, NOR, NPV, OFF Steering Front is plugged into Channel 1 Steering Rear is Plugged into Channel 4 This will let you use the CH3 (3) as your selector of 4WS(center) Rear Steer(left click) and Front Steer(right click) Then it will let you use the button to back and forth from CRAB and 4WS Only thing I would like to see on this is in the main menu under TRIM to have the ability to trim the other channels not just 1 and 2. I had to adjust the linkage to accommodate the lack of trimming the back servo, it still not perfect but it works. I can crazy climb stuff I was not able to before. My stairs are no problem anymore being about to bring the rear wheel over to grab the lip when it high centers. I will also say it takes a bit to get used to the rear end coming around in 4WS and CRAB is just plain funny looking. But could be useful in the rocks. I will test it soon at our rock climb and see. Last edited by vette66_00; 07-17-2011 at 04:26 PM. |
07-17-2011, 12:55 PM | #4 |
RCC Addict Join Date: Mar 2007 Location: Turn the mayflower around.. it will never work
Posts: 1,588
|
Oh yea 4ws makes a big difference and can be a headache on slick stuff. Did you try to use the sub trims for trimming? You can get sub trims in all channels. I must be doing something wrong. LOL. I can get it to swap between 4ws and crab on Ch3 button but ch3 trim dosent select between front, rear and 4ws. When i push ch3 trim it opens up epa flahing (4) then sets center on ch4. EDIT: Nevermind..... Austin posted in the other thread. Step rate was only 1% not 100% works now!! Last edited by JokersWild; 07-17-2011 at 01:10 PM. |
Thread Tools | |
Display Modes | |
| |