Vaterra Twin Hammers Jumping video: want to see what a stock one is capable of?

[heinie_21]

Here's a video of me jumping and bashing the TWH
Vaterra Twin Hammers Jump and Bash in the snow - YouTube


subscribe/like por favor

[Ballistic17]

Says video is private.

[heinie_21]

FIXED well i think it's fixed. let me know

[Ballistic17]

Good to go.

[hbj069]

Nice

[C*H*U*D]

I almost snagged one of these last night, but the RC budget is tapped for this month

Nice to see how it performs stock...thanks for throwing that together

[deftony]

Good to know what it's capable of stock!

[heinie_21]

Originally Posted by C*H*U*D

Nice to see how it performs stock...thanks for throwing that together

no problem! i know i was wondering how it performed but bit the bullet anyways. now others can see before buying

[deftony]

I'm actually kinda surprised by the jumping ability, just makes me want one even more

[vipxj]

Nice vid,Seems to handle well, and its running the stock electrics ?

impresive !

[heinie_21]

Originally Posted by deftony

I'm actually kinda surprised by the jumping ability, just makes me want one even more

thats a jump I built for my exo a few weeks ago. I had no idea if the TWH would clear it so I just hit it full throttle the first time and it clears it perfectly! Haha and it flies very balanced! Seems to land on its wheels every time! Wish I could say that for my exo.

Originally Posted by vipxj

Nice vid,Seems to handle well, and its running the stock electrics ?

impresive !

The sway bar in the rear would help high speed turns I think. If I get one ill post a before and after video for comparison. There's a lot of body roll and torque twist (which is to be expected for a shaft driven rock crawler/racer)

But it jumps impressively well. We'll balanced! The suspension soaks up landings well too!


That was all stock. I'll replace the ESC with a sv3 soon so i will post a vid on 3s



Sent from my SCH-I535 using Tapatalk 2

[benny_wiskas]

Originally Posted by heinie_21

I'll replace the ESC with a sv3 soon so i will post a vid on 3s

Let me know if that helps the throttle lag in low gear. I've heard it's the radio, but it seems like esc to me.

I want to see it crawl. (hint hint)

[heinie_21]

Originally Posted by benny_wiskas

Let me know if that helps the throttle lag in low gear. I've heard it's the radio, but it seems like esc to me.

I want to see it crawl. (hint hint)

I'm not using the stock radio. I'm using a DX3C.

I wish it were slower in low gear. It's low gear is faster than any of my scalers. But I like 55t motors with 15tooth pinions in my scalers so i like em real slow.


Plus the stock forward/brake/reverse setting drives me nuts while crawling. So I dont think ill ever really crawl this one. Just trophy truck-like speed mostly.

It's too fast to crawl at my crawling speed. I imagine most people who run 27t or 35t motors in their scalers will like the low gear speed though.


Sent from my SCH-I535 using Tapatalk 2

[Justynkace]

How does this compare to the Exo?

[heinie_21]

Originally Posted by Justynkace

How does this compare to the Exo?

Different

Sent from my SCH-I535 using Tapatalk 2

[heinie_21]

Originally Posted by Justynkace

How does this compare to the Exo?

Sorry for the vague answer. Vague answer for vague question.

The exo is wider. Lower. Faster. Has 3 open diffs. Has independent suspension all around.

It's hard to compare them because they're not in the same category IMO.

It's like asking how does that scx10 compare to the Slash?

Sent from my SCH-I535 using Tapatalk 2

[drzjohn]

there is a crawler mode that you can set the stock ESC TO, It is a pain to do it and took me a few attempts but it works

Originally Posted by heinie_21

I'm not using the stock radio. I'm using a DX3C.

I wish it were slower in low gear. It's low gear is faster than any of my scalers. But I like 55t motors with 15tooth pinions in my scalers so i like em real slow.


Plus the stock forward/brake/reverse setting drives me nuts while crawling. So I dont think ill ever really crawl this one. Just trophy truck-like speed mostly.

It's too fast to crawl at my crawling speed. I imagine most people who run 27t or 35t motors in their scalers will like the low gear speed though.


Sent from my SCH-I535 using Tapatalk 2

[heinie_21]

oh awesome! i'll have to try that! for now i'm having too much fun in "fast" mode haha.

[C*H*U*D]

Originally Posted by heinie_21

Sorry for the vague answer. Vague answer for vague question.

The exo is wider. Lower. Faster. Has 3 open diffs. Has independent suspension all around.

It's hard to compare them because they're not in the same category IMO.

It's like asking how does that scx10 compare to the Slash?

Sent from my SCH-I535 using Tapatalk 2

Great answer. I have an EXO and love it, but I don't want another one. I see this truck as a perfect "in between" truck that bridges the gap between crawlers, and trucks like the EXO. Someone was really paying attention to the wants of the crawling crowd when they came up with this... (I suspect Rubba)

I can't wait to get one of these...I may have to up the crawler budget for next month

[heinie_21]

i'm a genius. finally figured out how to embed video