project Big block

[greengoblin]

Ok this is the First test run of the truck on 2s lipo.

Sorry for the video its hard to drive and hold the camera at the same time

Project big block info .
Axial dingo kit
Aial lower Honcho links
Axial bead lock wheels
Pro Line Interco TSL SX Super Swamper 1.9 Tires
Vaterra Slipper Spring Cup & Retainer Set
Vaterra Aluminum Motor Plate & Clamp
Team Losi 90T 48P Kevlar Spur
Savox SA-1283SG Digital Steel Gear Servo
Castle Creations 10 Amp BEC
Castle Creations Mamba Monster 2 Brushless Esc/Motor combo 2,200kv
Vaterra 2 speed transmission with shift srvo and Receiver .





Short video of the truck driving in the street.
The truck starts in low gear shift to high then down shift on the way back.

[greengoblin]

Sorry it is a Spektrum SR300wp Receiver not a Vaterra Receiver

[alexchen86]

Sweet looking color choice that emerald flake green...some tricks for you since you are running a huge Castle 2200kv can which causes that squatting you see on your suspension. The load is way too heavy an COG way too high but of you are going for drags and mud drags in straight lines it's fine.

If you want it to be somewhat manueverable in the twisties at moderate speeds limit the shocks internally with nitro fuel tubing. That's how I used to slam my trucks for high speed. Also I highly recommend upgrading to a 32 pitch setup those stock teeth will wear out very quickly going 48 pitch.

Awesome rig we had a buddy that did the same setup as you it was ballistic!

[Deadpool]

The truck is made for HAULING OTHER RC RIGS AND AS A RECOVERY TRUCK there is no need for the truck to be fast and also the truck is about as fast as a stock honcho rtr so the squatting of the truck does not matter. Also I like that PACTRA LIME ICE PAINT

[greengoblin]

Old girl got some new paint. The green body was moved to my G6 project.

[greengoblin]

So i got the Rc4wd Dig Dog 1/10 trailer a few weeks ago.

[greengoblin]

Some first time pulling action