RCCrawler Forums

PhantomRS10 · 10-09-2011, 10:16 AM

Starting CPR!!!!!

Where is everyone.... Mike jimmy drew nate beano shortnuts al???

ClassicGMJunkie · 10-09-2011, 10:19 AM

anybody getting into comp rigs down there?!?!? 1.9, sportsmans, 2.2 moas??

i need to build a scaler or two for bashing when we visit down there

Onebdgti · 10-09-2011, 10:27 AM

No i wish there was some comps going on. I built a comp and it sits on the shelf most of the time.

ClassicGMJunkie · 10-09-2011, 10:35 AM

collect up some used tennis balls and cut them in half for gate markers. It feels much better to set a course up somewhere and run, rather than just show up and cycle some batteries going everywhere. When you have to think a course line out, it puts your mind in the game! I find it a lot more fun than just free crawling with scalers. Then again, its always more fun with friends.

miss you assholes!

PhantomRS10 · 10-09-2011, 10:42 AM

My comp has about 3 inch of dust on it

. Working on a few different things soon on the scale side of things!

Joel get in gear lol

Onebdgti · 10-11-2011, 04:34 AM

This place is still dead Reed.

brianw · 10-11-2011, 06:22 AM

I have 3 rigs that I'm building now but I've also got my house up for sale so it's really slow going...

2 axial based - 1 topless hummer h3, 1 hilux w/drop bed
1 mrc scaler

killswitch · 10-12-2011, 10:13 PM

My losi is finished mechanically in sportsman trim. Needs paint and I need to get with Drew on that. Honcho is having some water-bourne issues... working on it tomorrow. 1.9 comper is in the works- just did the dlux caster/LCC outer axle mod complete with RCBros high steer knuckles and a one-off set of Dlux knuckle weights for them, getting ready to bust out some delrin links in the next week or so. Leaf sprung hilux scaler is on the back burner for a while. Possibly looking at going MOA with a XR10 or berg over the winter for my pro class rig, but thats on the way back burner for now. Just found a new place in St Albans, so my next couple of weeks I'll be busy moving and setting up my new workshop, but after that I'm down for whatever.

Onebdgti · 10-14-2011, 06:59 PM

Well at least you wont be far for some good crawlin when you move to SA. I wanna find a different chassis for my sportsman rig. Can you give me some good ideas on one.

Duntz · 10-18-2011, 09:12 PM

Whens the next GTG?

Onebdgti · 10-19-2011, 05:37 PM

It will have to be after the 1st of the month for me.

axialchevy · 10-20-2011, 07:37 AM

weres rock nuts lol he started this post this dissapeard

PhantomRS10 · 10-20-2011, 09:21 AM

Dont worry im here

ClassicGMJunkie · 10-20-2011, 09:28 AM

with all the rocks down there at the river, has anyone gotten/needed city clearance to hold comps there?

CaptainSafety · 10-21-2011, 06:07 PM

I had to dismantle Hurricane Hills since we are moving so sorry guys. We had a good run. I did build a new scaler that i'd live to go shakedown soon somewhere close.

Onebdgti · 10-22-2011, 05:54 PM

Quote:

Originally Posted by ClassicGMJunkie

with all the rocks down there at the river, has anyone gotten/needed city clearance to hold comps there?

I dont see why we would have to. We just have to remember to clean up when were done. I say lets dooooooooooo iiittttttttt.

brianw · 10-22-2011, 07:14 PM

Quote:

Originally Posted by CaptainSafety

I had to dismantle Hurricane Hills since we are moving so sorry guys. We had a good run. I did build a new scaler that i'd live to go shakedown soon somewhere close.

staying in the Hurricane area?

CaptainSafety · 10-22-2011, 07:26 PM

Scott Depot

wvbigal · 10-26-2011, 09:18 PM

I'm back guys been tied up with a few things. Jimmy I need to have my 27 rebuilt.

killswitch · 10-27-2011, 04:24 PM

Quote:

Originally Posted by wvbigal

I'm back guys been tied up with a few things. Jimmy I need to have my 27 rebuilt.

It's gonna be a few Al. Still trying to get moved in to the new house and unpacked. My workshop is in boxes at the moment... I have everything to do it though.

10-09-2011, 10:16 AM	#1
PhantomRS10 RCC Addict Join Date: May 2010 Location: So. Charleston. Wv Posts: 1,221	Bringing this place back to life Starting CPR!!!!! Where is everyone.... Mike jimmy drew nate beano shortnuts al???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2011, 10:19 AM	#2
ClassicGMJunkie Quarry Creeper Join Date: Jun 2010 Location: Wheeling Posts: 454	anybody getting into comp rigs down there?!?!? 1.9, sportsmans, 2.2 moas?? i need to build a scaler or two for bashing when we visit down there

10-09-2011, 10:27 AM	#3
Onebdgti Rock Crawler Join Date: Jul 2010 Location: St. Albans Posts: 507	No i wish there was some comps going on. I built a comp and it sits on the shelf most of the time.

10-09-2011, 10:35 AM	#4
ClassicGMJunkie Quarry Creeper Join Date: Jun 2010 Location: Wheeling Posts: 454	collect up some used tennis balls and cut them in half for gate markers. It feels much better to set a course up somewhere and run, rather than just show up and cycle some batteries going everywhere. When you have to think a course line out, it puts your mind in the game! I find it a lot more fun than just free crawling with scalers. Then again, its always more fun with friends. miss you assholes!

10-09-2011, 10:42 AM	#5
PhantomRS10 RCC Addict Join Date: May 2010 Location: So. Charleston. Wv Posts: 1,221	My comp has about 3 inch of dust on it . Working on a few different things soon on the scale side of things! Joel get in gear lol

10-11-2011, 04:34 AM	#6
Onebdgti Rock Crawler Join Date: Jul 2010 Location: St. Albans Posts: 507	This place is still dead Reed.

10-11-2011, 06:22 AM	#7
brianw RCC Addict Join Date: Jan 2010 Location: Barboursville, WV Posts: 1,448	I have 3 rigs that I'm building now but I've also got my house up for sale so it's really slow going... 2 axial based - 1 topless hummer h3, 1 hilux w/drop bed 1 mrc scaler

10-12-2011, 10:13 PM	#8
killswitch RCC Addict Join Date: Jun 2005 Location: St. Albans Posts: 1,441	My losi is finished mechanically in sportsman trim. Needs paint and I need to get with Drew on that. Honcho is having some water-bourne issues... working on it tomorrow. 1.9 comper is in the works- just did the dlux caster/LCC outer axle mod complete with RCBros high steer knuckles and a one-off set of Dlux knuckle weights for them, getting ready to bust out some delrin links in the next week or so. Leaf sprung hilux scaler is on the back burner for a while. Possibly looking at going MOA with a XR10 or berg over the winter for my pro class rig, but thats on the way back burner for now. Just found a new place in St Albans, so my next couple of weeks I'll be busy moving and setting up my new workshop, but after that I'm down for whatever.

10-14-2011, 06:59 PM	#9
Onebdgti Rock Crawler Join Date: Jul 2010 Location: St. Albans Posts: 507	Well at least you wont be far for some good crawlin when you move to SA. I wanna find a different chassis for my sportsman rig. Can you give me some good ideas on one.

10-18-2011, 09:12 PM	#10
Duntz Newbie Join Date: Apr 2011 Location: Greenup Posts: 14	Whens the next GTG?

10-19-2011, 05:37 PM	#11
Onebdgti Rock Crawler Join Date: Jul 2010 Location: St. Albans Posts: 507	It will have to be after the 1st of the month for me.

Sponsored Links

10-20-2011, 07:37 AM	#12
axialchevy Rock Stacker Join Date: Feb 2010 Location: st. Albans Wv Posts: 73	weres rock nuts lol he started this post this dissapeard

10-20-2011, 09:21 AM	#13
PhantomRS10 RCC Addict Join Date: May 2010 Location: So. Charleston. Wv Posts: 1,221	Dont worry im here

10-20-2011, 09:28 AM	#14
ClassicGMJunkie Quarry Creeper Join Date: Jun 2010 Location: Wheeling Posts: 454	with all the rocks down there at the river, has anyone gotten/needed city clearance to hold comps there?

10-21-2011, 06:07 PM	#15
CaptainSafety Pebble Pounder Join Date: Feb 2005 Location: Scott Depot Posts: 197	I had to dismantle Hurricane Hills since we are moving so sorry guys. We had a good run. I did build a new scaler that i'd live to go shakedown soon somewhere close.

10-22-2011, 07:26 PM	#18
CaptainSafety Pebble Pounder Join Date: Feb 2005 Location: Scott Depot Posts: 197	Scott Depot

10-26-2011, 09:18 PM	#19
wvbigal Rock Stacker Join Date: Oct 2010 Location: saint albans Posts: 59	I'm back guys been tied up with a few things. Jimmy I need to have my 27 rebuilt.

RCCrawler Forums

Thread: Bringing this place back to life