RCCrawler Forums

rcnut38 · 12-17-2006, 08:29 PM

I think Seneca rocks would be a great spot. Don't know for sure who to contact about being able to do it there. I do agree it would be a great spot. And after were done crawling, There is always the hiking trail to the top of the rocks. Worth looking into.

Nitro · 12-17-2006, 08:30 PM

There are some really good spots up around Summersville Lake, the dam is nothing more than a huge pile of rocks, (a really big pile).
There is even a small lake 5 mins from my house that has a huge pile of rocks around the parking lot.

traylor4x4 · 12-17-2006, 08:31 PM

i'll talk to my mom she goes all the time ,i have not been but i have seen pics and all i saw were rocks

Jamus · 12-17-2006, 08:31 PM

Oh yeah, if we can it would be a good idea to keep travel time well below 5 hours. I mean, many of us could probably join other groups and drive 400+ miles.

Nitro · 12-17-2006, 08:33 PM

I agree, we would need to make it as equal of a drive as we can for everyone!

traylor4x4 · 12-17-2006, 08:36 PM

i just looked it up seneca is 3 hours for me thats not that bad

Nitro · 12-17-2006, 08:39 PM

About 3 to 4 for me! Any of you guys been to Williams River? Great spot to crawl, and great place to camp and trout fish!!

Jamus · 12-17-2006, 08:43 PM

4 hours to seneca, 2 hours to williams river. Not too bad for either.

rcnut38 · 12-17-2006, 08:45 PM

I am up for either. First things first, i got to get my rig built.

Jamus · 12-17-2006, 08:48 PM

No doubt, put build rigs and get more people on the to-do list.

Nitro · 12-17-2006, 08:52 PM

I guess I am going to have to get my junk running.

By the way I am running a tlt with hack up stock chassis, stampede trans, lathe motor, rc4wd alum. beadlocks(on the way) with mashers at the moment, Jeep body ofcourse.

Clod: Lathe motors, Super Rooster, Lst's, esp chassis, 9 tooth pinions, ttc motor mounts.

Jamus · 12-17-2006, 09:08 PM

Ok, so it looks like there is 4 of us, tonight anyways. I'm compiling a list of where we are, who we are, and what we run. So here's what I have.

Jamus (Beckley/Charleston area)
-TLT scaler
-TLT comp

Traylor4x4 (Martinsburg area)
-torsion stick clod
-Tuber clod(maybe)

Rcnut38 (Flatwoods area, Heaters)
-TLT (comp?)

Nitro (35 min. North of Charleston)
-TLT (comp?)
-clod

traylor4x4 · 12-17-2006, 09:11 PM

thats cool i'm in the process of finishing my clod [if ya want to call it that]so i hope after we get the holidays out of the way we get together somewhere somehow

rcnut38 · 12-17-2006, 09:13 PM

Hey, Lets really try and make a go at this. I know a few people who are not members (yet), and I think they would truly be interested in this. I will get in touch with about 3 more people tomorrow and see what I can find out. I will keep you guys posted. Later

Sounds awesome, Lets see what happens after the holidays.

Ballistic223 · 12-18-2006, 12:31 AM

I am from Weston which is about 100 miles north of Charleston and 50-60 miles south of Morgantown. I dont have my crawler finished yet but hope to have it done by spring. I would really like to get together with some others from WV and do some crawling!!

traylor4x4 · 12-18-2006, 06:01 AM

Sounds good

what are ya building?

Jamus · 12-18-2006, 10:32 AM

My uncle has a hunting camp in Weston. I added you to the list Ballistic223. Let us know what rig you are building and I'll add that info as well. So far it's looking like an even number of 2.2 TLTs and clods which I assume will be supers.

Ballistic223 · 12-18-2006, 11:41 AM

I am starting to get a TLT put together. But it seems like all that I can get done lately is work :-( . Hopefully shortly after the beginning of next year I will get to acquire some more stuff.

Jamus · 12-18-2006, 02:02 PM

I was messing around with trying to create a frapper map that we could use for just this WV GTG planning. But apparently I'm not as smart as I thought and can't get it to work properly. I guess just add your names to the one in chitchat section. Then just zoon in to our state.

west virginia krawler · 12-18-2006, 05:39 PM

i live in capon bridge. 25 minutes away form the winchester, fredrick count area. bout 1 and a half form arlington. cool very interested in a get together
o yea and i got some CRAZY crawl spots just behind my house. Believe me there good

thorseenstar (sp) i saw that u live in arlington,i just went to the arlington skatepark a week ago

12-17-2006, 08:29 PM	#21
rcnut38 Pebble Pounder Join Date: Nov 2006 Location: Heaters, WV Posts: 169	Seneca works I think Seneca rocks would be a great spot. Don't know for sure who to contact about being able to do it there. I do agree it would be a great spot. And after were done crawling, There is always the hiking trail to the top of the rocks. Worth looking into.

12-17-2006, 08:39 PM	#27
Nitro Quarry Creeper Join Date: Feb 2004 Location: Mountain State! Posts: 388	Rocks About 3 to 4 for me! Any of you guys been to Williams River? Great spot to crawl, and great place to camp and trout fish!!

12-17-2006, 08:45 PM	#29
rcnut38 Pebble Pounder Join Date: Nov 2006 Location: Heaters, WV Posts: 169	I am up for either I am up for either. First things first, i got to get my rig built.

12-17-2006, 09:13 PM	#34
rcnut38 Pebble Pounder Join Date: Nov 2006 Location: Heaters, WV Posts: 169	Dont let this die Hey, Lets really try and make a go at this. I know a few people who are not members (yet), and I think they would truly be interested in this. I will get in touch with about 3 more people tomorrow and see what I can find out. I will keep you guys posted. Later Sounds awesome, Lets see what happens after the holidays. Last edited by rcnut38; 12-17-2006 at 09:15 PM.

12-18-2006, 02:02 PM	#39
Jamus RCC Addict Join Date: Aug 2005 Location: Naoma, WV Posts: 1,479	I was messing around with trying to create a frapper map that we could use for just this WV GTG planning. But apparently I'm not as smart as I thought and can't get it to work properly. I guess just add your names to the one in chitchat section. Then just zoon in to our state. Last edited by Jamus; 12-18-2006 at 02:07 PM.

12-17-2006, 08:30 PM	#22
Nitro Quarry Creeper Join Date: Feb 2004 Location: Mountain State! Posts: 388	There are some really good spots up around Summersville Lake, the dam is nothing more than a huge pile of rocks, (a really big pile). There is even a small lake 5 mins from my house that has a huge pile of rocks around the parking lot.

12-17-2006, 08:31 PM	#23
traylor4x4 Pebble Pounder Join Date: Oct 2006 Location: under a rock Posts: 153	i'll talk to my mom she goes all the time ,i have not been but i have seen pics and all i saw were rocks

12-17-2006, 08:33 PM	#25
Nitro Quarry Creeper Join Date: Feb 2004 Location: Mountain State! Posts: 388	I agree, we would need to make it as equal of a drive as we can for everyone!

12-17-2006, 08:36 PM	#26
traylor4x4 Pebble Pounder Join Date: Oct 2006 Location: under a rock Posts: 153	i just looked it up seneca is 3 hours for me thats not that bad

12-17-2006, 08:43 PM	#28
Jamus RCC Addict Join Date: Aug 2005 Location: Naoma, WV Posts: 1,479	4 hours to seneca, 2 hours to williams river. Not too bad for either.

12-17-2006, 08:48 PM	#30
Jamus RCC Addict Join Date: Aug 2005 Location: Naoma, WV Posts: 1,479	No doubt, put build rigs and get more people on the to-do list.

12-17-2006, 08:52 PM	#31
Nitro Quarry Creeper Join Date: Feb 2004 Location: Mountain State! Posts: 388	I guess I am going to have to get my junk running. By the way I am running a tlt with hack up stock chassis, stampede trans, lathe motor, rc4wd alum. beadlocks(on the way) with mashers at the moment, Jeep body ofcourse. Clod: Lathe motors, Super Rooster, Lst's, esp chassis, 9 tooth pinions, ttc motor mounts.

12-17-2006, 09:08 PM	#32
Jamus RCC Addict Join Date: Aug 2005 Location: Naoma, WV Posts: 1,479	Ok, so it looks like there is 4 of us, tonight anyways. I'm compiling a list of where we are, who we are, and what we run. So here's what I have. Jamus (Beckley/Charleston area) -TLT scaler -TLT comp Traylor4x4 (Martinsburg area) -torsion stick clod -Tuber clod(maybe) Rcnut38 (Flatwoods area, Heaters) -TLT (comp?) Nitro (35 min. North of Charleston) -TLT (comp?) -clod

12-17-2006, 09:11 PM	#33
traylor4x4 Pebble Pounder Join Date: Oct 2006 Location: under a rock Posts: 153	thats cool i'm in the process of finishing my clod [if ya want to call it that]so i hope after we get the holidays out of the way we get together somewhere somehow

12-18-2006, 12:31 AM	#35
Ballistic223 Newbie Join Date: Sep 2006 Location: At the nuthouse! Posts: 32	I am from Weston which is about 100 miles north of Charleston and 50-60 miles south of Morgantown. I dont have my crawler finished yet but hope to have it done by spring. I would really like to get together with some others from WV and do some crawling!!

Sponsored Links

12-18-2006, 06:01 AM	#36
traylor4x4 Pebble Pounder Join Date: Oct 2006 Location: under a rock Posts: 153	Sounds good what are ya building?

12-18-2006, 10:32 AM	#37
Jamus RCC Addict Join Date: Aug 2005 Location: Naoma, WV Posts: 1,479	My uncle has a hunting camp in Weston. I added you to the list Ballistic223. Let us know what rig you are building and I'll add that info as well. So far it's looking like an even number of 2.2 TLTs and clods which I assume will be supers.

12-18-2006, 11:41 AM	#38
Ballistic223 Newbie Join Date: Sep 2006 Location: At the nuthouse! Posts: 32	I am starting to get a TLT put together. But it seems like all that I can get done lately is work :-( . Hopefully shortly after the beginning of next year I will get to acquire some more stuff.

12-18-2006, 05:39 PM	#40
west virginia krawler Rock Crawler Join Date: Jun 2006 Location: capon bridge Posts: 571	i live in capon bridge. 25 minutes away form the winchester, fredrick count area. bout 1 and a half form arlington. cool very interested in a get together o yea and i got some CRAZY crawl spots just behind my house. Believe me there good thorseenstar (sp) i saw that u live in arlington,i just went to the arlington skatepark a week ago Last edited by west virginia krawler; 12-18-2006 at 07:06 PM.

RCCrawler Forums

Thread: w.v.,northern v.a.,crawlers