Go Back   RCCrawler Forums > Regional > Midwest > Wisconsin
Loading

Notices

Thread: Anyone know?

Reply
 
LinkBack Thread Tools Display Modes
Old 10-19-2008, 07:43 PM   #1
Rock Stacker
 
Join Date: May 2008
Location: Miller Park
Posts: 61
Default Anyone know?

Will these work on the Axial shock shafts? I'm looking to get a little more ride height but I do not want to change the shock location.

http://www3.towerhobbies.com/cgi-bin...?&I=LXKMD6&P=7
slick is offline   Reply With Quote
Sponsored Links
Old 10-19-2008, 08:26 PM   #2
Quarry Creeper
 
Join Date: Apr 2008
Location: Racine
Posts: 476
Default

Yes, they do. I used them on a tuber I built.
MrNate is offline   Reply With Quote
Old 11-17-2008, 08:19 PM   #3
Rock Stacker
 
Join Date: May 2008
Location: Miller Park
Posts: 61
Exclamation

Update - These rod ends WILL NOT WORK on 3mm threads which is the thread size of the shock shaft. I only have calipers at home, and this is not really the best way to measure, but you can see the id hole is huge! See attached pic.


Long story short, I did some searching on McMaster and picked up some standoffs. I decided on nylon to start, and turns out that after the beating on Sunday (A few 3+ foot falls!), they will work great!

Cheers!
Attached Images
 
slick is offline   Reply With Quote
Old 11-18-2008, 08:52 AM   #4
Quarry Creeper
 
Join Date: Apr 2008
Location: Racine
Posts: 476
Default

Sorry about the bad info, there. I should have read a little more carefully, because I used a set of Stampede rod ends.
MrNate is offline   Reply With Quote
Old 11-18-2008, 10:57 AM   #5
Quarry Creeper
 
Join Date: May 2008
Location: Franklin
Posts: 263
Default

Hmmm the Dubro HD 3mm ends are 10mm longer than the stock rod ends. How ever it looks like you fond a fix for it.
Gozer is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com