RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   XTM Crawler (http://www.rccrawler.com/forum/xtm-crawler/)
-   -   xfactor elec conversion? (http://www.rccrawler.com/forum/xtm-crawler/9279-xfactor-elec-conversion.html)

grnlux 05-07-2005 04:18 AM

xfactor elec conversion?
 
I have searched for any info and can not seem to find any can anybody give me some tips and pics of conversions done
I have been offered a stock xfactor with no motor for cheap want to know if its worth turning into a crawler.
Any help or assistance would be most appreciated.

doubledub 05-07-2005 06:53 AM

x-factor conversion
 
I converted one to electric and the only thing worth keeping is the axles, I used a txt chassis and trans and it works ok. :neutral:

grnlux 05-07-2005 06:08 PM

Any body got pics of completed project?

toyofast 05-08-2005 01:56 AM

Long time ago, I had a X-Factor that used the stock chassis, side plates and most everythign else.... but I dropped in a Jugg2/TXT tranny w/ a GD-600 into it. Worked fine for the most part. :mrgreen: It was a heavy ass SOB in it's early stages. Pushing a good 17lbs RTR, yet it'd run for about 45-60 minutes :twisted:


http://www.rcrockgear.com/BC/Whistle...4/PICT4590.jpg

http://www.rcrockgear.com/BC/Whistle...4/PICT4592.jpg

http://www.rcrockgear.com/BC/Whistle...4/PICT4608.jpg


Search for Tater Tot or The 'Tot here on RCC and you may find some of the hacked job images that show it's insides :lol:

IBCRUSN 05-12-2005 02:26 PM

Here are a few shots of my electrified X. I'm into crawling but living on Long Island doesn't really lend itself very well. I'm also not into tubers, they look cool but just like 1:1 it's overkill for 95% of the people wheeling.

At any rate, it has performed very well. I am planning on extending the wheelbase about another 1" and swapping out the motor for something else (I'm at the point that I will start winding my own armatures).

http://img.photobucket.com/albums/v4...4-1437_IMG.jpg

http://img.photobucket.com/albums/v4...4-1439_IMG.jpg

http://img.photobucket.com/albums/v4...4-1440_IMG.jpg

http://img.photobucket.com/albums/v4...4-1445_IMG.jpg

http://img.photobucket.com/albums/v4...4-1441_IMG.jpg

http://img.photobucket.com/albums/v4...4-1443_IMG.jpg

http://img.photobucket.com/albums/v4...4-1442_IMG.jpg

Cheers,
Kris

4x4transam 05-18-2005 11:19 PM

I can help you , have a great X factor crawler
 
Hello there

I build a great x factor electric conversion if you like i will help you to get all the parts and tell you how to build it.
I also have vids posted on this message board and lots of pictures BEFORE i made the final change overs what made this e factor really good.
i run stock chassis 8 shocks shortened side plates links much longer, stock axles locked, lathe motor, pede transmission, 7 cell 3000 batterie[ truck runs for an hr and 20 min.}, revo driveshats, 1/4 scale servo's.

if you want to know more let me know

nitrorcracer 02-19-2013 02:09 PM

Re: xfactor elec conversion?
 
Im actually building one as we speak. anybody got any pics of one with a stampede or rustler trans? or info or tips? any info would be greatly appreciated.

nitrorcracer 02-22-2013 12:28 AM

Re: xfactor elec conversion?
 
Monday ill have the pres trans in and Hopefully have so good luck

Threesheets 05-23-2013 06:59 AM

Re: xfactor elec conversion?
 
I have an old nitro xtm x-factor that's been on the shelf for 6 yrs and looking to do something with it. What's the typical cost of the conversion?


All times are GMT -6. The time now is 04:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com