September 2014
SMTWTFS
« Jun  
 123456
78910111213
14151617181920
21222324252627
282930 
This many people have viewed our homepage since 2/7/07

axialracing

Video of Axial Yeti 2.2 Rock Racer

Check out the video from the exclusive RCCrawler footage of the Axial Yeti 2.2 Rock Racer.  Continue reading

Exclusive review of the Axial YETI

I was lucky enough to be invited down to Axial Racing HQ in Irvine, CA to drive Axial’s latest product, the YETI™ a 1/10th Scale Electric 4WD – RTR. After having a little pow wow in the boardroom one of the Axial minions (they all look the same to me wearing skinny jeans and baby T’s that would look like a belly shirt (cropped top, half shirt, midriff shirt, tummy top) on me) Continue reading

Axial Racing teaser pic of Yeti

Axial posted on their blog a single image of their latest product, the AX90026 YETI 1/10th Scale Electric 4WD – RTR. No specs were released, only the two lines “You asked for it, we listened. Requested. Delivered. Introducing the Yeti™, dirt’s new friend.” Continue reading

Axial SCX10™ 2012 Jeep® Wrangler Unlimited Rubicon 1/10th Scale Electric 4WD – Kit

 
The Jeep® Wrangler Unlimited Rubicon is one of those vehicles that is rarely left stock once in the hands of its owner. We understand this and have come to the table with our next offering. Our partnership with Jeep® continues with a kit version that allows you to build your Jeep® from the ground up.

Rigid Industries LED Light bar by Vanquish Products

 Just hours after Axial released their new 2012 SCX10 Jeep Wrangler Unlimited Rubicon Vanquish Products has stepped up to the plate with an awesome new Licensed Rigid Industries Light bar, built to bolt right on.

Continue reading

Axial SCX10™ 2012 Jeep® Wrangler Unlimited Rubicon 1/10th Scale Electric 4WD – RTR

 Axial has joined forces with the most recognized name in off-roading – Jeep®. The SCX10 Jeep® Wrangler Unlimited Rubicon was designed to resemble its full sized “scale/1:1″ counterpart. We really did our research with this vehicle by building a full scale version for testing, research and development. We wanted to make sure you’d get the best built SCX10, right out of the box.

Continue reading

Goat Hill Scale Challenge 2012

 Written by Harley.  Yesterday marked the first Goat Hill Scale challenge. This event really showcased what the KCRC (Kansas City Rock Crawlers) club can do. The Kansas City area is really stacked with some amazing talent, I’d put it against any club in the nation for the ability to put out some of the coolest trucks, media and products in RC crawling. I’m proud to be part of this club.

Continue reading

Harley’s Recap of the 2012 Axial Northwest Scale Championship

Follow along as Harley recaps his trip to the 2012 Axial Northwest Scale Championships.

Continue reading

A new rig from Axial?

Tonight I got home from work and running errands and sat down in front of my computer to do some catching up on RCC.  I did my nightly rounds on all the sites, then like I always do I headed over to the Axial blog to see if maybe Brad has built something new or added any new tech.  To my surprise I see a new article about Racers Only Motorsports Designs

 

 

Continue reading

Kaetwo’s Review of the Axial Wraith Part 2

Now that I have had a week to really put the Wraith through its paces and take it apart and look things over a bit more closely, I thought it would be cool to do a part II to my original review.

I have had a lot of PM’s and emails asking me to cover the following topics;

Continue reading

Kaetwo’s review of the new Axial Wraith

Before I begin my review, let me begin by explaining why I feel that I can give an honest review of the rig, even though it’s still unavailable to the public.

Firstly, I had the honor of attending the Montana Scale Nationals this past weekend, where PinchFlat and I judged courses for both Street class and Spec. Being that we were the first to offer our help with Spec, we requested to judge the Wraith course, and couldn’t have been happier when we were told that we would in fact be the judges for that course. As luck would have it, we also had the opportunity to setup the courses that these spec rigs would be running on. Continue reading

Rock Candy RCCs Jessica Downing joins the Axial Rock Crawling Competition Team

April 29, 2011- Irvine, CA – Axial is pleased to announce that accomplished rock crawler, Jessica Downing, has joined the Axial Rock Crawling Team. Continue reading

Team Fast Eddy builds an SCX-10

A lot of new people would love to build a kit rather then buy a RTR but are intimidated due to never having built a kit before. Hopefully this series will help people decide to build a kit rather then buy a RTR.  Follow along as Team Fast Eddy builds the entire kit on camera. Continue reading

Jake Wright joins the Axial Rock Crawling Competition Team


April 25, 2011- Irvine, CA – Axial is pleased to announce that accomplished rock crawler, Jake Wright, has joined the Axial Rock Crawling Team. Wright will be competing with the Axial XR10 with Hardline Body at the following events for the remainder of 2011 season: Axial AWCC, Vanquish Products presents: La Guerra en Rocas Rojo, USRCCA Nationals, AWCC Washington Qualifier, and the AZ Summer Shoot Out. Continue reading

Axial Wraith™ Ready-to-Run 1/10th Electric 4WD Rock Racer

Axial Wraith™ Ready-to-Run 1/10th Electric 4WD Rock Racer The Wraith™ Ready-to-Run 1/10th Scale Electric 4WD Rock Racer is another “FIRST” for Axial with the first and most realistic full tube-frame chassis design that is manufactured with high strength composite materials. Continue reading

Axial crawlers at the Portland International Auto Show 2011

Team Axial driver Ryan Gerrish attended the Int’l Auto Show in Portland, Oregon this past weekend. Ryan and fellow northwest crawler Brett Carlson set-up a small Axial booth at the show to demo some SCX10 TR’s, and allow fellow show attendees to take the wheel of an SCX10. Ryan’s dashing good looks scored him a small spot on the local news. Thanks to Bulu Productions for making the video!!! Continue reading

Axial Transmission Spur Gear Cover

Axial Transmission Spur Gear Cover













Continue reading

Axial 2.2 Ripsaw Tires – R35 Compound

The Axial 2.2 Ripsaw Tires offer both a realistic looking tire for the image-conscious scale crawler that is also looking to improve in the performance game as this 2.2 Ripsaw offers an aggressive tread design, ground clearance and a new R35 sticky compound. Continue reading

Sneak Peak of Axial’s new crawler

A photo was taken at a 1:1 event (KOH) of Axial’s newest scale crawler and shortly after the new spread like wild fire on forums around the world. The new crawler appears to be a scale replica of a 1:1 crawler with a plastic molded cage and a full scale interior, new wider axles. It is rumored that it will be available in May 2011 and have price of $350 to $400 RTR.

Continue reading

Axial AE-2 Forward/Reverse ESC with Drag Brake

Axial has just released a great new speed control for crawlers, the AE-2. Designed in conjunction with Castle Creations the ESC features full proportional forward and reverse with drag brake and is Castle Link™ compatible.

Continue reading