-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
****Chit Chat Thread****
- Thread starter rcracer
- Start date
I'd suggest running some 8T or 9T pinions first, you can mod the case so you don't need to buy the adjustable motor mounts.
I'm back to work this week but off again next if you can wait? I might need some soldering work done so maybe we can trade.
Your gonna have to let the cat out the bag and let us know what you've been up to! I also have some 1/4" black split wire loom left if you think it would clean your mess up. Did pretty well for mine.
Your gonna have to let the cat out the bag and let us know what you've been up to! I also have some 1/4" black split wire loom left if you think it would clean your mess up. Did pretty well for mine.
i crammed in 12 cells into my hustler with that big ol evx
had to build a flat 6 cell pack and a 6pack 3x3 pack to get all 12 cells into the drivers seat of this thing..
also have the bec crammed in there....there is litterally no room left in the cab for any wire loom
as it is ....every thing is pretty much tapped into a wad just to keep it inside of the windows
well since i did that ...i had a spare rooster crawler sittin here
sooooo i stuffed that into my scaler ...since it had just a standard rooster and the bec in the standard is a 1.5 and the one in the crawler is a 5 amp....so that should make a bit of a difference
im getting that red 400 + servo for my front axle on the super on thursday when i get my cash from selling my paintall gear
i also made 2 small reinforcing arms for my stearing servos on the super today it helped a bit but think im gonna fab up some aluminum plates for it that have a 3 point mount
oh...and i blew up my 27.2 reed ported race motor in my baja....
had to build a flat 6 cell pack and a 6pack 3x3 pack to get all 12 cells into the drivers seat of this thing..
also have the bec crammed in there....there is litterally no room left in the cab for any wire loom
as it is ....every thing is pretty much tapped into a wad just to keep it inside of the windows
well since i did that ...i had a spare rooster crawler sittin here
sooooo i stuffed that into my scaler ...since it had just a standard rooster and the bec in the standard is a 1.5 and the one in the crawler is a 5 amp....so that should make a bit of a difference
im getting that red 400 + servo for my front axle on the super on thursday when i get my cash from selling my paintall gear
i also made 2 small reinforcing arms for my stearing servos on the super today it helped a bit but think im gonna fab up some aluminum plates for it that have a 3 point mount
oh...and i blew up my 27.2 reed ported race motor in my baja....
JUSTGOINGSLOW
RCC Addict
So what your saying is that your trying to stuff 10lbs of sh*t into a 5lbs bag. :shock: You'd the man. "thumbsup"
JUSTGOINGSLOW
RCC Addict
I better keep a close eye on you, you'll try an stuff me in there if you could. 
shrek
Rock Crawler
JUSTGOINGSLOW
RCC Addict
Those are almost to pretty to get all scratched up on rocks. :lol: Me likey, so how heavy are they? :roll:
shrek
Rock Crawler
Man you make it hard to keep up with the Jones's! lol
Saul.... If you take the stock axle brace for the clod that goes from center to inner "c" and bend one end flat so it has an "L" shape it will reach from the motor forward to probably about were your servo mount is. I did that on mine but my servos are upright and yours are lay down even so I think it might work, It's steel and stong! Sorry to hear about the Baja! Looks like its time for one of those 30cc motors!
Saul.... If you take the stock axle brace for the clod that goes from center to inner "c" and bend one end flat so it has an "L" shape it will reach from the motor forward to probably about were your servo mount is. I did that on mine but my servos are upright and yours are lay down even so I think it might work, It's steel and stong! Sorry to hear about the Baja! Looks like its time for one of those 30cc motors!
JUSTGOINGSLOW
RCC Addict
Gary, those look awesome. I think you'll have no problem hooking up with those hammers. I think where going to have to change your name from Shrek to "BIG PIMP'EN" :lol: you are definitly styling now my brotha.
like always, not the best pics. It might work for ya, not sure if your servo will alow it but this is how I have mine.
Attachments
Bam Bam
Rock Crawler
Who makes those? Because i have a set of rockcrusher that i won, that need rims for. Wow I feel lonely, all of you having ax-10's and i still have my tlt sw2.:-(
JUSTGOINGSLOW
RCC Addict
Bam Bam, those are mayhem double phatty comps. Made by Mayhem Eng. and your alright with the SW2 TLT. Thats an awesome rig, It is'nt what you got, but how you drive It. ;-)
Bam Bam
Rock Crawler
Sweet i will try and order those and my sw2 does great because i have the money to upgrade but there no point when it works how i want it to. Now with the txt i can't even get the to climb a hill anymore.
JUSTGOINGSLOW
RCC Addict
You and your Dad, should try to make It to our first comp. It's right by where you live, Meijers on M-59 in White Lk. If you guys do! make sure you sign up in the competition section.
Similar threads
