2010 Mr. Ed's Kamikaze Kustoms Mini Zero

[Mr. Ed]

Been a while since I updated my MRC status. I'm still not sure how I want to set up my steering so that is on the " to do " list and I want a new body for it but not sure what i want yet:?

Grappler?
Proline 72 chevy?
Proline Bug?

Hmmmmm any way here's a run down of the truck.

Kamikaze Kustoms Mini Zero
Sidewinder Micro with NEW crawler software"thumbsup"
Losi Insane 370 with 12 tooth pinion
Losi Lockers F,R,C
Losi MLST2 shocks, white springs cut, 20 weight oil
Losi wide wheel hexs
3 Racing knuckles and C's
RcBros servo clamps
RcBros 7.4 1000mah lipos
RcBros servo arm
Hitech 645
DarkSoul Comp Rims:mrgreen:
Panther Cobras Cut'N'Shut
Axial Beadlocks
Proline Chisels
Proline FlatIrons..Butchered
Losi factory Mini Monster Baja Body

 

[Cole874]

that thing look saweet!! how do you like them tires im thinking about making a set

 

[Mr. Ed]

My Favorite tires I've run so far make sure you get the Red Dot tires"thumbsup" they were super easy to make too!

 

[MRCnoob]

Very nice rig! I really want to get a set of those beadlocks after seeing them on your mini.

I vote 72 chevy body, from your list. I'm a little partial to the parma comp body. It will be my next body.

Again, nice rig.

 

[country_crawler]

I vote for the 72' Chevy!

 

[Drvnbeing]

whats this new crawler software?? I looked on the site and did not see any new patches out?

 

[Mr. Ed]

whats this new crawler software?? I looked on the site and did not see any new patches out?

when I updated my settings on the sidewinder micro there is now a full on crawler option under the drag break section. if you link up to modifiy your settings you will find it there. almost DOUBLED my drag break from previous settings."thumbsup"

 

[jkwrangler08]

Mr Ed... I've got the same chassis and love it.. Here's my specs and couple of pics of my "preferred" lids.. Ones the comp model and the other is the show model. "thumbsup" These pics were taken with the CKRC beadlocks and Chisels.. Just got the HB's yesterday..

Kamikazi Kustom Mini MRC chassis
Hitek 5645 digital servo
Holmes mini torquemaster 22t (12t pinion)
CC Sidewinder micro ESC
Losi alum beadlocks (3.0 oz front 2oz rear)
HB Rovers
Parma Mini Comp Crawler body
Hot Racing Aluminum shocks (30wt) (limited 1/4")
Metal lockers (front/rear)
Front Losi CVD's
Integy Driveshafts
Alum Wide wheel hex's (additional washers for spacing)
Losi aluminum c-hubs
Losi alum steering knuckles
HR rear axle lock-outs
HR metal tranny gears
HR 61t metal spur gear
Traxxas 3mm steering rod ends

 

[Mr. Ed]

Nice Paintjob on your rig JK"thumbsup"

 

[ram_tough]

lookin good "thumbsup"

 

[soundcolor]

The front tires are bcmackwards, the steering link is Jeffers, oh and the body is unlevel...



You suck milk boy

 

[joe daigle jr]

well mr ed nice to see that you still have the zero in your stable i have the proline bug on mine and love it when she is about to go over just blip the throttle and you are back on all fours wish jeff would make more of these chassis jk good luck with those intigy drive shafts i have snapped two sets

 

[Mr. Ed]

The front tires are bcmackwards, the steering link is Jeffers, oh and the body is unlevel...



You suck milk boy

Quit giving all my super sweet comp secrets away! oh your pretty new lid won't hide subpar drivin skillz

 

[jkwrangler08]

Joe.. So far so good with the Integy shafts.. They've lasted through 5 comps and numerous practice sessions... My Son gave them to me after my staock ones were about to fail..

Gonna get MIP's when these break "thumbsup"

 

[soundcolor]

BTW, I got your motor about done...

Doing a few more tweaks to give it that little extra

 

[Mr. Ed]

BTW, I got your motor about done...

Doing a few more tweaks to give it that little extra

you just gave away another comp secret...yer my pit crew"thumbsup" cant wait to try it out8)

 

[soundcolor]

BTW, what's the width and depth if the channel on your fancy alum. Wheels

 

[Mr. Ed]

BTW, what's the width and depth if the channel on your fancy alum. Wheels

3/8 wide and 3/16 deep

 

[jkwrangler08]

oh sure.. had to bring up the Integy driveshafts.. :-( Just blew the front one practicing today..

Ordering MIP's as we speak.. "thumbsup"

 

[Mr. Ed]

oh sure.. had to bring up the Integy driveshafts.. :-( Just blew the front one practicing today..

Ordering MIP's as we speak.. "thumbsup"

I'm still running the factory drive shafts on mine, I've put a couple on in the past but they shafts are so cheap it's easy to keep a couple in the pit box. Plus I like my drive shafts being the weak link in my truck cuz they easy to replace and cheaper than a ring and pinion or a axle. Now I do have a set of mini revo shafts sitting around waiting for a brokein drive shaft to see if they will work but....haven't broke a drive shaft to see if it will work."thumbsup"