• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Menifee-Temecula area crawlers

Those broken tree branches were a royal pain, my crawler kept getting hung up by either those on the ground or low overhangs. It was a definitely a learning experience. Again thanks for the great job of putting it all together.
 
jerry2575 said:
When I ran it with my pitbulls I really didn't have a problem with the leaves
Click to expand...

The Flatirons are a little narrower. I only got buried in one spot but I could see the 2.2's floated, kinda like cheating a little if you ask me :mrgreen:
 
Ben about the the Rig I Gave ya will type a list up and send it to ya later.
It is an Axial SCX10 frame ALL STOCK. Has Honcho wheelbase, With Wraith wide axles and Vanquish Titanium steering links front axle has Axial CVD axle shafts. Shocks are stock SCX10.
ESC is Novak Rooster crawler w/ Novak 55T motor.
Hi-Tek 7955TG stearing servo.
Axial 2.4 gig RX/TX.
Pro-Line weighted Beadloks w/Pro-Line Hammer 2/2 tires.
Would suggest changing out the plastic links. Sure Ickabob could help ya with this they are Stock Wraith Lowers on rear. already has axial aluminum, uppers and all 4 in front are aluminum.
A 35T Motor would help speed things up on it. Integy is about $30.
Battery. Go to Hobbypartz.com GenAce 5000mh 40C about $35.
Enjoy it.
 
Cpt Nemo said:
Ben about the the Rig I Gave ya will type a list up and send it to ya later.
It is an Axial SCX10 frame ALL STOCK. Has Honcho wheelbase, With Wraith wide axles and Vanquish Titanium steering links front axle has Axial CVD axle shafts. Shocks are stock SCX10.
ESC is Novak Rooster crawler w/ Novak 55T motor.
Hi-Tek 7955TG stearing servo.
Axial 2.4 gig RX/TX.
Pro-Line weighted Beadloks w/Pro-Line Hammer 2/2 tires.
Would suggest changing out the plastic links. Sure Ickabob could help ya with this they are Stock Wraith Lowers on rear. already has axial aluminum, uppers and all 4 in front are aluminum.
A 35T Motor would help speed things up on it. Integy is about $30.
Battery. Go to Hobbypartz.com GenAce 5000mh 40C about $35.
Enjoy it.
Click to expand...
Nemo, your the man giving this rig to Ben"thumbsup""thumbsup""thumbsup"
 
Cpt Nemo said:
Ben about the the Rig I Gave ya will type a list up and send it to ya later.
It is an Axial SCX10 frame ALL STOCK. Has Honcho wheelbase, With Wraith wide axles and Vanquish Titanium steering links front axle has Axial CVD axle shafts. Shocks are stock SCX10.
ESC is Novak Rooster crawler w/ Novak 55T motor.
Hi-Tek 7955TG stearing servo.
Axial 2.4 gig RX/TX.
Pro-Line weighted Beadloks w/Pro-Line Hammer 2/2 tires.
Would suggest changing out the plastic links. Sure Ickabob could help ya with this they are Stock Wraith Lowers on rear. already has axial aluminum, uppers and all 4 in front are aluminum.
A 35T Motor would help speed things up on it. Integy is about $30.
Battery. Go to Hobbypartz.com GenAce 5000mh 40C about $35.
Enjoy it.
Click to expand...

That is great Nemo I didn't realize you gave it to him. That is awesome
 
Cpt Nemo, thank you for the all the information and the information that is forth coming. Awesome. What a beautiful present/gift. Thank you
 
Ickabob, what about that gated area, who owns that property, is part of the golf course? The gate I am thinking of is right near where we park
 
bens170 said:
Ickabob, what about that gated area, who owns that property, is part of the golf course? The gate I am thinking of is right near where we park
Click to expand...

I'm not sure we want that much attention to our spots, wouldn't want them closed because of any problems .
 
You must log in or register to reply here.

Similar threads

I
Let’s crawl! (New Jersey)
Replies
0
Views
1K
IvanOoze
I
L
Calling Crawlers!! Hudson Valley Crawling
Replies
0
Views
347
LandRaider
L
S
Vanquish VRD - Reducing Wheel Base
2
Replies
25
Views
1K
Spanishcop
S
H
This is the Last Time I Run my Rc4wd Marlin Crawler (stock)
Replies
6
Views
578
Hanshotfirst
H
T
Rear dig w/Dlux NOD 2?
Replies
2
Views
197
Tucky
T
Back
Top