Carter Fab & Machine Custom Scaler Axle Housings

[CarterFab]

I'm in east Texas. 1.5 hours east of Dallas and an hour west of Shreveport, La.
Lookie what I whipped up the other night

 

[spankbomb]

How about some HL pumpkins with more scale tubes? I could use those right know. Oh, and I'm not sure where Hogeye is, but I'm over here outside Austin. Go Texas!

Cool. There's a cool scale scene here in Austin. No where to crawl in Bastrop Co. that I'm aware of.

[/hijack over]

 

[Bulldog]

Nice Clay!!! Don't tempt me son! :twisted:

 

[jcsaxial]

What would we be lookin at for hybrid xr housings I have the stock ar60s I can send them to you.

 

[CarterFab]

What would we be lookin at for hybrid xr housings I have the stock ar60s I can send them to you.

Responded to pm

 

[CarterFab]

Newest set of custom housings. Matched set, narrowed 1.125", all aluminum, centered rear, Wraith link geometry.

Go like the CFM Facebook page and join in the contest to win a $40 gift certificate for finding the difference in this centered Wraith housing, besides the width, than all previous versions.

 

[mark32]

im in hawkins where you located at

 

[easleycrawler]

Newest set of custom housings. Matched set, narrowed 1.125", all aluminum, centered rear, Wraith link geometry.
View attachment 237321
Go like the CFM Facebook page and join in the contest to win a $40 gift certificate for finding the difference in this centered Wraith housing, besides the width, than all previous versions.

Those are badass Clay, thank you.

 

[CarterFab]

im in hawkins where you located at

Kilgore

 

[easleycrawler]

Here are my custom wraith axles. The width is perfect, the true ''1 ton'' look. Thanks Clay."thumbsup"

 

[CarterFab]

Here are my custom wraith axles. The width is perfect, the true ''1 ton'' look. Thanks Clay."thumbsup"

Thanks for sharing. Look great.

 

[Bulldog]

Clay doesn't mess around. Another fine product. They look great under there.8)

 

[CarterFab]

Here's one that's been asked about in the past. Can you make an OCP
SCX-10 housing.
The extra width over a normal SCX housing is from using the Wraith knuckles and c's.

 

[craddock35]

You have some mad skills to be able to do all this. Great work on the axles they look great. I wish I could afford a set for every one of my crawlers or at least one of them.

 

[CarterFab]

There is a summer contest going on the CFM Facebook page. Link in my signature to the page. Like the page, submit your Koozie pic, get the most likes and win!!

Need a Koozie?
http://www.rccrawler.com/forum/vendors-miscellaneous/448675-beat-heat-cfm-koozies.html#post4356357

 

[BigSki]

I've been eyeing up the VP center sections for some custom axles for my large scale Willys. When you make steel axle tubes, do you press fit them into the center section or do you use the set screws like the VP tubes?

The AXR-10 bybrids I'm running have been holding together nicely for the past 2 years, they just don't look scale enough for me. I'm ready to have a nice set of axles tat can take a beating!

"thumbsup"

 

[CarterFab]

For a Currie center, they assemble just like factory. On the Dana 60 style AR aluminum housings, it's a special sweat/press fit.

 

[CarterFab]

Oh yeah, the BlackRock 60s are done

 

[CarterFab]

And the Ultimate 9s are finally going under a rig.

 

[Shinjari]

So wait, can you make custom tube lengths for the VP Curries? LIke say....XR10 length....or even shorter than Scx10?