• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Szczerba's SCX-EXO

Looks like a great time man. That's some crazy mud. Still loving the growlers?

Mine is coming along nicely. I've made some tweaks to your design, and mine is running a lot more bling. :D I'm very excited to get it up and running.
 
Looks like a great time man. That's some crazy mud. Still loving the growlers?

Mine is coming along nicely. I've made some tweaks to your design, and mine is running a lot more bling. :D I'm very excited to get it up and running.

The 1.55 Pitbull Growlers continue to work awesome with the CrawlerInnovations foams.
This rig is 5.5lbs RTR so they helps keep it light on the trail/rocks.

Rivas Concepts got some good video of this rig going through some mud sections. The rig is 100% waterproof so I hammer down through anything!

Nice. Glad you are liking your build. This rig works awesome and I think the two main reasons are the low weight and rear upper link mods.
 
Last edited:
The 1.55 Pitbull Growlers continue to work awesome with the CrawlerInnovations foams.
This rig is 4.5lbs RTR so they helps keep it light on the trail/rocks.

Rivas Concepts got some good video of this rig going through some mud sections. The rig is 100% waterproof so I hammer down through anything!

Nice. Glad you are liking your build. This rig works awesome and I think the two main reasons are the low weight and rear upper link mods.

Sweet build, love the 1.55's and everything you've done. Only thing I might do is trim about 1/4" off the bottom of EXO cage so that sliders are bent up a little, kinda mild boat side. "thumbsup""thumbsup"
 
Last edited:
Sweet build, love the 1.55's and everything you've done. Only thing I might do is trim about 1/4" off the bottom of EXO cage so that sliders are bent up a little, kinda mild boat side. "thumbsup""thumbsup"


Right on.

I mentioned this rig weighs 4.5lbs a couple times. But it weighs 5.5lbs RTR. :ror:
 
Teardown #2 after Recon G6 #2 for this rig. Seems like I always have to perform a teardown after a Recon G6!

zymevu2u.jpg

ygaruzyp.jpg

BRXL, castle bec pro and 614ff all coated in liquid electrical tape looking good in the Vanquish Electronics box.
u4u5upeq.jpg


Sent from my computer-phone.
 
Last edited:
Holmes Hobbies Crawlmaster Sport 540 motor. A little more pep than the 35t I had in there before! Ill have to jog to keep up now.
Geared 14/60 with 32p gears
http://holmeshobbies.com/CrawlMaster-SP-13.html
vehe3azy.jpg

evynybub.jpg

9upu6ypu.jpg

esusy9aq.jpg

gedamyqu.jpg

Ready for Crawlapalooza!
jezu2eje.jpg

Pitbulls and Crawler Innovations foams wearing in nice.
2a2y2yje.jpg

Savox 1283-SG is still going strong!
ubudy4ug.jpg


Sent from my computer-phone.
 
Last edited:
1.55 rig pulled 2nd place in the 1.9 class at the Crawlapalooza Scale Comp.
Had a great time at Crawlapalooza #7. Great to hang out with everyone. Thanks to sponsors, organizers, judges and staff.
The whole scale event was a ton of fun. I am sure some pictures will surface. Too busy having fun to take any!

pe9ynepa.jpg






Sent from my computer-phone.
 
1.55 rig pulled 1.9 Driver of the Day at the ARCC Zombie Hunter G6 ay Superlift Offroad Park.

Thanks to RolandRockshop for organizing the day.

Thanks to Dinky RC for the SCX Cantilever setup I won.
Thanks to Crawler Innovations for the foams I won.
And thanks to Carter Fab, Superlift ORV, Krawler Koncepts and Big D's RC fir sponsoring the event ad well!

e5uta8an.jpg

emene5a6.jpg

arypyqeq.jpg

4emydu6e.jpg

ujamuhah.jpg



Sent from my computer-phone.
 
Good to hear on that. lean-beef is a good way of describing them too.

I forgot I even had them in there the other day due to them not weighing anything.:ror:

Amazing build! Great job

Thanks. I'll run this rig against any 1.9 or 2.2 rig. I ran with a group of 2.2 wraith guys on Saturday. It will hang with most if I get them 1.55 Pitbulls on the right line. Really makes me think about every turn and become a better driver.
 
Back
Top