2010 Super Bully all Juiced Up

[Agama]

WOW, those turned out great! Thanks for posting the details."thumbsup""thumbsup"

 

[70duncan]

Great build "thumbsup". And nice job on those knuckle weights. Those are just like the ones I am working on. Only I just have access to steel.

Is that brass heavier than steel?

 

[cwneuwirth]

Great build "thumbsup". And nice job on those knuckle weights. Those are just like the ones I am working on. Only I just have access to steel.

Is that brass heavier than steel?

Thanks, yes brass is heavier than steel.

 

[Dr.Frank]

Hello,

nice weights "thumbsup"

Greetings Frank

 

[cwneuwirth]

Hey guys I'm getting ready to start wiring this thing up, and I have a question. I'm running a Hitec 7950 per axle, should I run a CC BEC for both or a BEC for each servo? I can't find any info on amperage draw on these things. Appreciate any info.

 

[meffie]

Hey man, just found this rig. Looks awesome, and love the wheel weight idea. If the 2.2 your sending has been loved like this thing has, I'm sure it'll be a great rig!

 

[krawlfreak]

Hey guys I'm getting ready to start wiring this thing up, and I have a question. I'm running a Hitec 7950 per axle, should I run a CC BEC for both or a BEC for each servo? I can't find any info on amperage draw on these things. Appreciate any info.

i run a single bec for the two front servos and a single for the rear servo as well.

the reciever and dig are powered by the esc.

with only one you will see the voltage cutout.

 

[cwneuwirth]

i run a single bec for the two front servos and a single for the rear servo as well.

the reciever and dig are powered by the esc.

with only one you will see the voltage cutout.

Thanks krawlfreak, I'll pick up another BEC. Thanks for the great chassis's as well, top notch stuff.

 

[fullwidthtoy]

you have some nice disc brakes on that thing!




oh wait thats those weights you were talking about..."thumbsup"

 

[booher26]

Thanks for the comments guys"thumbsup" I got some Losi 17mm hubs. These slide right on. I just had to drill the hole out for the pin to 1/8" on the hub and CV. I then cut some 1/8" drill bits down to size for some beefy pins. shouldn't break these.
View attachment 124535

Is it me or do these Bully knuckles just beg for some knuckle weights? Stay tuned8)

View attachment 124536

do you know what those losi hubs are for?

 

[The Violator]

The hubs from my Losi 8ight t fit.

 

[Coachdod1]

Can you explain how you made the links using the 1/2 inch and 3/8 delrin with the revo ends? All the threads that I have read has everyone using 1/4 inch rod for the links. I don't see how you made the revo ends fit. Thanks.

 

[ittybitty]

It looks like he just drilled them to either 4mm or 8-32 and then either sanded or used a lathe to taper the ends to meet up with the revo rod ends.