Duce8281
Newbie
Any of you guys know anything about the Airtronics M8 TX. I found some info on upgrading them to the 2.4 system but I am not sure where to get the parts or what receivers I can use with it. Any info would be a big help.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Airtronics M8 conversion Help
- Thread starter Duce8281
- Start date
JokersWild
RCC Addict
You are converting a fm radio to 2.4...... You are adding a module to the radio being 2.4 dsss and will need to use 2.4 dsss rx. This is the same for m8 and m11 tx. Just an fyi there is a slight delay from signal..... You can tell if you run really fast onroad. If not you may not notice. I did with m11 long ago.....
Airtronics Module - M11/ M8 Tx 2.4GHz DSSS
Airtronics Module - M11/ M8 Tx 2.4GHz DSSS
