• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

anyone else try headlight lens restorer?

wl6

Newbie
Joined
Jul 28, 2006
Messages
42
Location
Cape Coral
Tried the turtle wax headlight lens restorer on the Impala today. Alot of the oxidation came off, but the pitted sections will be a s.o.b. I followed the directions but feel I need to go another round on it. Total time I took to do both headlights was about 10 minutes. The 2"x2" pieces of sand paper hurts the fingers. There has to be a drill attachment to do the buffing/polishing.
 
Last edited:
I've polished headlight lenses with Flitz already. It shined them up for a little bit but not for too long. I'd just replace the lenses with some crystal clear lenses like on many late model vehicles.

The mothers mini powerball would work.
 
I was wondering how long it will last for. Will check out the mini powerball."thumbsup"
 
Get the 3M kit.

Older "Bugeye" Subies are known to have poor UV protectant in the plastic and yellow/pit quick.

Check out what a local guy did (The 3M is all hand drill based)

Before:
img2189irq.jpg


After:
img2190j.jpg


The post with some more info:
http://www.misubie.com/forum/showthread.php?t=1650
 
I used one of the kits on my 88 Bronco that was in the mud a lot. The headlights were orange! They look brand new now"thumbsup" 1000 and 2000 grit sandpaper will do the same thing. You just won't have a sealer after you are done. The kit I got was from Advanced for $12. It was enough to do my headlights and the wife's car to"thumbsup" Took about 30min per car.
 
On my old beater Mini Van with the Turtle Wax kit, couldn't find a 3M kit (did feel like ordering one)
headlight.jpg
 
I use some light rubbing compound applied by hand, then if I feel like it, hit it with some good wax and the power buffer.
 
Wax will help them last longer post the cleaning as well. As many good quality waxes do have some UV protectant in them and well the crap slips off quicker.
 
Back
Top