Axial NVS

[Tread Well]

Hi.I have some RadioShack LEDs with red,orange housings.I also have the AXIAL NVS.Well I want to connect the RadioShack LEDs to the NVS.The thing is the RadioShack LEDs have inbuilt resistors inside the housing.Can I connect these to the NVS which I guess has the resistors already in it unlike the RadioShack LEDs the resistors are packed into the LED housing ,along the LED.
The RadioShack LEDs are :

So I don't want to use some of the original NVS LEDs ( without the resistors but I guess it's inside the NVS box ) but use the RadioShack LEDs with the resistors.Now if I do connect the way I want to wont it become 2 resistors for one Led?Pls help.I really want to use the RadioShack LEDs for the housing but want to use the NVS too. I can remove the RadioShack LEDs from the housing but that would mean That I have to cut a sealed housing which I don't want to simply because its very neat and waterproofed I guess.

 

[xCoolHandLukex]

I tried this before and the lights were really dim

 

[Tread Well]

What is the work around?Or the only thing is to gut the Radioshak housing and insert the original NVS led into it?

 

[redsawacs]

Those radio shack LEDs are 12volt and will not operate on the NVS system. As mentioned, may try removing the lamp from the housing and inserting the axial lamp.