Axial XR10 Kit

[paystin]

The axles are slightly wider than bergs up front, so berg wheels would be best probably all the way around. The rear axle is narrower than the front. Do yourself a favor and get a good set of adjustable wheels now though 8)

Thanks Harley"thumbsup" I do a have some VP's but I also have three or four sets of each offset that I was hoping to use as well.

 

[xxgg]

Oh god... release date is now around September?
I would like to get it before it snows here in Canada.

 

[eric113]

Brad, what servo horn are using?

 

[BENDER]

Brad, what servo horn are using?

I was running a Great Planes servo horn for a while. But, I recently switched to a Robotronics servo arm and I like it a lot more. It's more rigid, clamps on the servo output shaft, and it's red. :ror:

 

[ErÄjOrMa]

Bender's Futaba shows no need for servo guard :ror:.

 

[BENDER]

Bender's Futaba shows no need for servo guard :ror:.

She is getting a little beat up. :ror: :ror:

 

[fa1rch1ld]

What offsets are recommended? I currently running some SLW.7 I would like to
run on the XR. Input would be appreciated form the MOA guys "thumbsup", I'm
coming over from a Losi.

 

[eric113]

For the cutting brake would micro or even mini servo work ?

 

[mesooners]

Is this thing out yet. If so post some pics. I want one but can't find them yet

 

[Agama]

Is this thing out yet. If so post some pics. I want one but can't find them yet

dude, you might try reading the first 65 pages of this thread. :roll: It's not out yet.

 

[mesooners]

Dude (sounds like something a kid would say) most of the post here r old and don't have nothing to do with what I asked besides I have looked at them. So go be rude with someone else. I don't post here much for the reason that most don't. Which would be the rudeness that happens here everyday.

 

[DRCrawlGood]

She is getting a little beat up. :ror: :ror:

Seeing how that horn is rashed up, does the horn get hung up alot with this design or is that just from pushing rocks outta your way. :mrgreen:

 

[meffie]

Is this thing out yet. If so post some pics. I want one but can't find them yet

It's out for some select people. There are build threads on it in the XR10 section. General Public is late Aug, Early Sept atm

 

[BENDER]

Seeing how that horn is rashed up, does the horn get hung up alot with this design or is that just from pushing rocks outta your way. :mrgreen:

This is my personal rig, as well as being one of the R&D rigs. So, it has seen some really harsh situations. Honestly, the servo horn doesn't get hung up very often. 8)

 

[Norris]

BENDER, I have been looking for the RED tabs on the ears of your servo, who and where can I get them? I have broken the ears off servos and to replace the case can be costly.

 

[kasper]

I bielieve rcbros has them

 

[BENDER]

BENDER, I have been looking for the RED tabs on the ears of your servo, who and where can I get them? I have broken the ears off servos and to replace the case can be costly.

I honestly don't know, Brandon gave me those. I am sure he will see this and chime in though. 8)

 

[EddieO]

They kinda look like the old Matt Francis Servo mounts.....

Later EddieO

 

[PaloAltoK5]

BENDER, I have been looking for the RED tabs on the ears of your servo, who and where can I get them? I have broken the ears off servos and to replace the case can be costly.

They don't have red, but:

LINK

<FORM method=post name=cart_quantity action=http://cart.rcbros.com/product_info.php/rcbros-full-wrap-110th-servo-clamps-p-188?action=add_product><TABLE border=0 cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD><TABLE border=0 cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD class=pageHeading vAlign=top>RcBros Full Wrap 1/10th Servo Clamps
[RCB510]</TD><TD class=pageHeading vAlign=top align=right>$3.50 </TD></TR></TBODY></TABLE></TD></TR><TR><TD>

</TD></TR><TR><TD class=main><TABLE border=0 cellSpacing=0 cellPadding=2 align=right><TBODY><TR><TD class=smallText align=middle><SCRIPT language=javascript><!--document.write('
Click to enlarge');//--></SCRIPT>
<NOSCRIPT></NOSCRIPT></TD></TR></TBODY></TABLE>Tired of breaking off your servo arms or squishing them to tightly with your screw washer combos? Then look no further, these handy servo clamps allow an even clamp across the entire servo ear case eliminating the issues you once had.
These are made for most 1/10th scale servos on the market, however please note some servo case sizes vary from the ordinary and may not work correctly with these clamps.
This servo clamp wraps fully around your servo, if you wish to mount your servo flush please purchase RCB500 servo clamp.

Price $3.89 a pair
</TD></TR></TBODY></TABLE></FORM>
<TABLE width="100%" align=center height="100%"><TBODY><TR><TD vAlign=center align=middle></TD></TR></TBODY></TABLE><SCRIPT type=text/javascript>var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));</SCRIPT><SCRIPT type=text/javascript src="http://www.google-analytics.com/ga.js"></SCRIPT><SCRIPT type=text/javascript>try {var pageTracker = _gat._getTracker("UA-15197532-2");pageTracker._setDomainName(".rcbros.com");pageTracker._trackPageview();} catch(err) {}</SCRIPT>

 

[Brandon]

I honestly don't know, Brandon gave me those. I am sure he will see this and chime in though. 8)

I picked those up from Dave MFG a few years ago. Not sure if they are still around. I am running them on my XR10 as well. They are overkill, so its nice 8)