Yes because 1400 posts are easy to skim through and find the anwsers to all your questions :ror:
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Axial XR10 Kit
- Thread starter BENDER
- Start date
Yes because 1400 posts are easy to skim through and find the anwsers to all your questions :ror:
boosted4lyf
I wanna be Dave
ya gotsta suuuurch :roll:
HOLLYWOOD7
Quarry Creeper
I would like to see a team xr10 without plastic shocks!
mxracer33x
Quarry Creeper
They are Aluminum shocks, Just Plastic preload colllars and caps, Which can be upgraded.
Here is a clip from Holyrollers Build:
Axial has a couple upgrade parts for their shocks. They have Aluminum Preload Collars and Aluminum Shock Caps. Tom had a couple packages of Axial shocks that he was not needing and I decided to use the upgrade parts on my shock build up. These parts do not change the build up over what is in the kit except that you have to install an o-ring into the Aluminum Preload Collars that you would not with the plastic ones.
HOLLYWOOD7
Quarry Creeper
Plastic caps still tend to rip off in comps I have seen it happen to friends leaking oil for the next guy!!
robbio4422
Rock Crawler
rpp sent me my notice that my package is in the mail via fed ex..."thumbsup"
ToyZuki
RCC Addict
Mine showed up this weekend. Only took about 6 hours to throw it together. It went together real easy. Only problem I see so far is the spread of the rear body mounts lines up perfectly with the edges of the scoop making it a bitch to punch clean holes in the body. Other than that I was short 1 grub screw (I probably dropped it). Looks like a killer set up right out of the box. Thanx axial"thumbsup"
Take a look at my body post mod in my build thread.
http://www.rccrawler.com/forum/showpost.php?p=2615119&postcount=47
TEDROCKZ
I wanna be Dave
BIG troubles!!! Working hard to get my XR10 built, get to where you need bag G. No bag G in my kit. Who do I kill......:mrgreen:
........J/K no big issue. I have more than enough laying around to remedy the problem. All in all a very simple build and very well layed out. Anyone know when all the optional partshit the shelves?
........J/K no big issue. I have more than enough laying around to remedy the problem. All in all a very simple build and very well layed out. Anyone know when all the optional partshit the shelves?
dpdsurf
I wanna be Dave
So where exactly did you mean to hit the spacebar here? :ror:
meffie
RCC Addict
lol that could go a couple different ways too!
Similar threads
