Brushless Redcat

[IQLogic]

Hi,

ESC and one of my motors are gone so I'm finding some replacement. What do you think about this combo?

Paidiss MT28-36 Series 1800KV

+

Hobbywing EZRUN-35A-SL Brushless ESC

 

[suij]

Hey there, those motors have a 4mm shaft, so you would have drill out your pinions or find MOD 0.6 pinions with a low tooth count and 4mm bore to get then to fit. The pinions were a straight swap with no modification the motors I used. Have linked them in my build thread in reply to your question.

 

[IQLogic]

Oh, I didn't look at the shaft diameter But I think that 1000kV is not enough